What can I do with the Bell Wi-Fi app?
With the Bell Wi-Fi app, you can: For other features, such as tracking usage per device, accessing your Bell Home Hub can help manage your Bell Internet experience. The procedure to access the Home Hub 2000, 3000 or 4000 is the same as for any other Bell modem.
Why can’t I access my Bell hub remotely?
Check your WAN IP Address (& DNS settings) in your Hub & the One currently in use in the DNS control panel on your NO-IP account. If they are not in synch the it’s not refreshing & you won’t be able to access remotely. The addresses you mention for your Bell Hub below, look OK. These should appear as the available addresses on your internal network
Is DHCP enabled on the bell hub?
Yes, DHCP is enabled on both devices... the Bell Hub, using DHCP, provides the only device connected to it (the Asus router) with the address 192.168.2.12... that is the extent of the Bell Hub's network. My Asus router runs it's own network with all my other devices and has DHCP enabled to handle that.
How do I connect my Bell hub 2000 to Asus router?
" First, your ASUS device should be connected to an ordinary Ethernet port on both devices " I have the ethernet cable connected to a LAN port on the Bell Hub 2000 but to the WAN port on the Asus router. When I connect it like you suggest (LAN to LAN), the Asus router reports 'no internet connection'!
What is Access control on Bell modem?
The Access control feature of your Home Hub lets 1000 you set the time and day a particular device can access the Internet.
How do I control devices connected to MyBell Wi-Fi?
Block or pause Internet access by deviceOpen the Bell Wi-Fi app and log in with your MyBell username and password.Touch Devices at the bottom of the home screen.Select the device you wish to block Internet access.To pause Internet access immediately, touch Pause.More items...
How do I access MyBell Internet modem?
To access the settings for your primary Wi-Fi network:Open your web browser and visit bell.ca/mymodem or 192.168. 2.1.Enter your administrator password. Unless you have changed it, the default password is “admin”.Click Log in.Click on the Wi-Fi settings button.
Does Bell Home Hub have a firewall?
You have the standard firewall but, there is no configurable Firewall within the gateway. Our equipment is optimized for the best available protection.
How can I see what websites have been visited on Bell Wi-Fi?
Click Log in / Register. Select your Internet service from the left panel, then click Check usage. Select your Internet service from the left panel, then click Check usage. The usage for the current month is shown.
How do I control my modem?
0:091:36How to Control Your Network from Anywhere with your Android PhoneYouTubeStart of suggested clipEnd of suggested clipYou'll be able to see all your mydlink enable devices right on your phone just touch the router toMoreYou'll be able to see all your mydlink enable devices right on your phone just touch the router to quickly see which devices are connected to your. Network.
How do I reset MyBell modem remotely?
Log into MyBell. Click My services and select Internet from the drop-down menu. In the Wi-Fi section, click Reboot your modem. Wait until the lights on the front of the modem are solid white.
What is the bell modem administrator password?
Type http://home (or 192.168. 2.1) in the address bar and then press Enter on your keyboard to access your modem's settings. Enter the administrator password. Unless you have changed it, the default password is "admin".
What is the difference between a modem and a router?
Your modem is a box that connects your home network to the wider Internet. A router is a box that lets all of your wired and wireless devices use that Internet connection at once and also allows them to talk to one another without having to do so over the Internet.
How do I turn off the Firewall on my Bell router?
Click on the Protection icon. Click on the Firewall icon. In the Firewall window, click the checkmark to turn the firewall off.
How do I open ports on my Bell router?
Configuring port forwarding Select Settings from the top menu bar. Select Firewall from the left menu bar. Select Port Forwarding. Follow the on-screen settings to enable and configure Port Forwarding.
How do I optimize my hub 3000?
Improve Wi-Fi connection on my Home Hub 3000 modemOpen a web browser.Click Wi-Fi optimizer.Enter the administrator password. Unless you have changed it, the default password is "admin".Click Optimize now to initiate the test. ... The modem will confirm once the optimizations have been completed.
How do I log into MyBell Home Hub 2000?
Type 192.168. 2.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Bell Home Hub 2000 is (blank).
How do I connect MyBell modem to my computer?
Connect your modem – Bell Fibe™ Internet service Connect the other end of the Ethernet cable into your computer's Ethernet port. Connect one end of the power adapter to the modem. Connect the other end of the power adapter into a wall socket.
How do I connect MyBell 3000 modem?
How to replace your Home Hub 3000 modemDisconnect all cables from your current modem and connect one end of the phone cable into the DSL port on the back of the new modem. ... If you prefer a wired connection, connect one end of the Ethernet cable to any Ethernet port on the back of the modem.More items...
How to block internet access on Bell?
To block Internet access: Open your web browser and visit bell.ca/homehub (or 192.168.2.1). From the home screen, click on Access control. Click on the pencil next to Always block. Select the devices you want to block. Click the Apply button. Click the Save button.
What is access control on home hub?
The Access control feature of your Home Hub lets 1000 you set the time and day a particular device can access the Internet. It blocks all Internet features, including email, social messaging or Skype. There are two ways you can control access to the Internet: Create a schedule for specific devices.
What is Bell Aliant warranty?
Bell Canada (including Bell Aliant, a division of Bell Canada) ( “Bell”) warrants to you as the original purchaser ( “Purchaser” or “you”) the battery purchased for the Fibre Equipment ( “Original Battery”) for a period of 12 months from the date of purchase of the Original Battery from Bell ( “Warranty Period”) when used in the Fibre Equipment ( “Warranty” ). “Fibre Equipment” means the Home Hub 3000 modem or UPS (uninterruptible power supply), as applicable, provided by Bell in connection with certain of your Bell services. If the Original Battery fails due to a defect during the Warranty Period, Bell will replace the Original Battery with a new or refurbished battery ( “Replacement Battery” ). Any warranty coverage that remains during the Warranty Period on the Original Battery (when replaced with a Replacement Battery under this Warranty) will apply to the Replacement Battery. No Replacement Battery has any new or separate warranty coverage. Bell reserves the right to limit the number of Replacement Batteries provided to Purchaser during the Warranty Period.
What is the limitation of liability for Bell?
Limitation of Liability. To the extent permitted by applicable law and except where prohibited for Quebec residents, Bell's total cumulative maximum liability for negligence, breach of contract, tort or any other claims or causes of action, including fundamental breach, in connection with any Battery or this Warranty is limited to payment, upon request, for actual and direct damages up to a maximum amount equal to the purchase price of the Original Battery, and all other damages , including without limitation indirect, special, consequential, incidental, economic, exemplary or punitive damages, are excluded. You may also be subject to other limitations and exclusions of liability, and obligations, as set out in any Bell terms of service that apply to you. These terms survive the expiry of the Warranty.
What to do if my Bell battery isn't working?
What Should I Do? Ontario and Québec residents please call Bell at 1 866 310 BELL (2355) and residents of the Atlantic provinces please call 1 866 342-7367, so that Bell can confirm that the Original Battery is within the Warranty Period and attempt to diagnose and correct the malfunction over the telephone . Be sure to keep your proof of purchase to establish the date of purchase of the Original Battery; otherwise Bell may have to estimate the date of purchase.
How to delete a schedule on Bell?
Delete an existing schedule. You can delete existing schedules by clicking on the 'X' next to the schedule you wish to delete. This will delete the entire schedule. Open your web browser and visit bell.ca/homehub (or 192.168.2.1). From the Home screen, click on Access control.
What is access control?
Access control only blocks Internet connections; it will not prevent devices from accessing other devices on the local network (e.g. , network printers, local file sharing between devices). With your Home Hub 1000 modem, you can specify time periods when particular devices cannot access the Internet.
What is the IP address of the Bell Hub 2000 router?
You misread my description... The Bell Hub 2000 router has the address of 192.168.2.1. Because my Asus router is behind the Bell router it needs an address on the Bell network... so it needs an address within the Bell router's IP address range... hence 192.168.2.12. The Asus however runs it's own network range starting with it's own address of 10.0.2.1 and assigns addresses (DHCP) to devices on that network in the set range 10.0.2.2 - 10.0.2.254.
What is the lease table on the Bell Hub 2000?
The Lease Table on the Bell Hub 2000 shows the Asus router address as the only leased one.
Does Bell have a POE injector?
Bell provided a POE injector and modem/router ( Bell Hub 2000). I already had my own router (Asus RT-AC3100) and I wanted to continue using it as the main router. So, I set up the Bell Hub 2000 as follows:
Does Asus router have DHCP?
Second, I think another problem may be that DHCP is enabled on your Asus Router. A simple network can only have one instance of DHCP running, In your configuration it looks like DHCP is enabled on the Bell & the ASUS devices, assuming this is correct you need to disable DHCP on the ASUS and let your Bell device handle it.
What are the pitfalls of remote access?
Aside from the issues of IP addresses and reliability, there are several other possible pitfalls that appear when one tries to implement a remote access system. For example if you’re using a 4G router, you’ll also need to configure port forwarding, and make sure the IP networking is configured correctly in all the devices involved.
Why are cellular routers important?
Industrial cellular routers are designed with features specifically needed for monitoring equipment in unmanned locations . In addition, telco’s have added the required settings to their networks to make remote access possible. Finally, while bandwidth and cost limitations have in the past made it hard to achieve the true potential of wireless connectivity, today the relatively low cost and high bandwidth available on cellular networks makes remote access a cost effective option for many industries.
What is M2M cellular?
This is a service that uses the same cellular backbone as traditional mobile broadband, but the SIM cards are specially provisioned with features needed by remote unattended equipment.
Can SIM cards be used to connect to a group?
Significantly these SIM cards can be set up to form a “virtual private network” between devices in a group. In this kind of configuration, the cellular network allocates private, static IP addresses to all the devices in the group, and each device is able to “see” all the other devices in the group directly. The devices may or may not also have access to the wider internet. Hence it becomes very simple to configure a reliable network of remote devices, without the worry of losing configurations or the devices being compromised by hackers on the internet.
What is remote PVR?
Remote PVR is a new feature that lets you program and manage your shows online from any location using your computer or mobile phone. How much does it cost?
Where to connect Ethernet cable to router?
Connect one end of the Ethernet cable directly to the port on the back of the receiver. Connect the other end of the Ethernet cable to one of the following: an Ethernet port in your router or switch or a Homeplug adapter.
Where is the model number on a receiver?
The model number is displayed on the front panel of your receiver. Your receiver is compatible if you see the numbers 9242 or 9241 in the lower left corner.
Can you use a remote PVR with a non-PVR receiver?
No, Remote PVR does not support non-PVR receivers.
Can a 924x router send packets?
I thought the 924x receivers had the HomePlug capability built-in, i.e., they can send and receive packets through their own AC power cords without the use of an external adapter. That's why only one adapter is required (for the router end).
