Does the Draytek Vigor 2862 have a USB port?
The Vigor 2862, Vigor 2862n and Vigor 2862ac models have two USB ports. A feature central to DrayTek routers is its VPN (Virtual Private Networking) capabilities. A VPN enables you to link remote offices and branch offices back to HQ, or home-based/mobile teleworkers back to your office.
How do I remotely manage a DrayTek router?
DrayTek routers can be managed remotely once management from the internet has been enabled. This is not enabled by default and must be enabled from [System Maintenance] > [Management]by enabling the Allow management from the Internetoption.
Why is my DrayTek router not connecting to the Internet?
If the address shown starts with 10.x.x.x, 172.16.x.x or 192.168.x.x, or if the router is known to be behind another NAT router, the DrayTek router may still be inaccessible from the internet. This can usually be resolved by forwarding the DrayTek router's management ports on the router that the DrayTek is receiving its WAN connection through.
What operating systems does the Draytek smart VPN Client Support?
DrayTek Smart VPN Client is free and supports Windows OS, macOS, Apple iOS (iPad, iPhone) and Android. You can learn more about the DrayTek Smart VPN Client here.
See more
How do I access my DrayTek router remotely?
Open a browser, input https://[the router's WAN IP] in the address bar, and hit Enter. You should see the login page of the router's Web-based UI. (NOTE: If you changed the router's HTTPS port, specify the port number after the IP address.)
Is the DrayTek 2862 end of life?
2020-04-22. DrayTek formally announce the End Of Life (EOL) of： Vigor2862 Annex B version. Vigor2862B Annex B version.
How do I access my DrayTek modem?
The DrayTek Vigor 130 modem has a web interface available on http://192.168.2.1 (username of "admin" and password of "admin" by default). This can be used to check ADSL / VDSL diagnostic information or re-configure the modem to bridge a DHCP / Static IP connection if required.
Does DrayTek support OpenVPN?
Latest DrayTek Vigor routers support the OpenVPN Dial-Out function since firmware version 4.2. 1. This VPN protocol can be used for encrypted tunelling with other DrayTek router, and it's potentially compatible with other vendors.
What is the IP address for DrayTek router?
192.168.1.1Usually, you can access the router's management page at 192.168. 1.1, which is the router's default LAN IP address.
What is Bridge mode on a router?
What is bridge mode? Bridge mode is the configuration that disables the NAT feature on the modem and allows a router to function as a DHCP server without an IP Address conflict.
How do I get vigor 130 in Bridge mode?
The Configuration of Vigor130 1. Go to Internet Access >> General Setup, enable VLAN Tag Insertion but leave Tag Value as "0". 2. Go to Internet Access >> MPoA / Static or dynamic IP, enable Bridge mode.
How do I configure DrayTek router?
Access the DrayTek router's web interface via your web browser, which will be accessible on http://192.168.1.1 by default. Enter the username of "admin" and the default password of "admin". 2. Browse to [WAN] > [General Setup], click [WAN1] and set the VLAN Tag insertion (VDSL2) setting to Enable.
How do I change the IP address on my DrayTek router?
On LAN >> General Setup >> LAN 1 Details page, you can change the IP settings. Network Administrators may use any IP subnet that is preferred, as long as it does not conflict with the WAN IP settings. By default, Vigor Router uses the subnet 192.168. 1.0/255.255.
How do I change my DrayTek WIFI password?
Go to [System Maintenance] > [Admin Setting]. Enter the existing password in the Old Password box, then put the new password in both the New Password and Confirm Password boxes. Click OK to apply the change. The router will then display this message to indicate that the password has changed.
How do I reset my DrayTek router?
Go to System Maintenance >> Reboot System on the web page. The following screen will appear. Choose Using factory default configuration and click OK. After few seconds, the router will reboot with all settings back to to the factory default.
What is Vigor2862?
Vigor2862 series is a VDSL modem router equipped with an RJ-11 WAN port, built-in VDSL/ADSL modem, a GbE WAN port, and a lot of enterprise-grade features. It is designed for small/medium business with a DSL connection, needs Internet redundancy, and advanced network management.
Does Vigor2862 have port forwarding?
Vigor2862 Series can do port forwarding and reserve bandwidth for VoIP traffic automatically, making VoIP setup effortless. Setup Guide
What is a VPN on a Draytek router?
VPN - Linking remote offices, HQ, teleworkers and mobile staff. A feature central to DrayTek routers is its VPN (Virtual Private Networking) capabilities. A VPN enables you to link remote offices and branch offices back to HQ, or home-based/mobile teleworkers back to your office.
What rack mount bracket fits Vigor 2862 router?
The RM1 Rackmount Bracket enables you to fit any Vigor 2862 series router into a standard 19" rack or cabinet.
What is the switch hierarchy view?
The Switch Hierarchy view provides a visual overview of interconnections between DrayTek VigorSwitch switches with the devices connected to each LAN port:
What is WAN2 modem?
WAN2 is a Gigabit Ethernet port and can connect to a secondary modem/connection, such as another DSL modem. The Vigor 2862 features multiple methods of WAN connectivity - ADSL/VDSL, Ethernet, USB port for connection of a 3G/4G modem, optional built-in 3G/4G or (on wireless models) and Wireless WAN. The Ethernet port can connect to ...
How many VPN tunnels can Vigor 2862 use?
The Vigor 2862 allows you to have up to 32 simultaneous VPN tunnels to remote offices or teleworkers. It supports all common industry standard protocols, encryption types and authentication methods (see specification tab for full support list). Teleworkers can authenticate directly with your LDAP server if preferred.
How does Vigor 2862 work?
The Vigor 2862's built in DSL interface will connect to either an ADSL or VDSL2 line. If you have a second line (of either type) you can add an additional modem (or your existing modem from your other line) to the Vigor 2862's Ethernet WAN ports. You can set the two lines up in load balancing mode, where traffic is split across both of them, or into failover mode, where the other DSL line only kicks-in if your primary DSL line fails (or vice versa). ADSL makes a particularly good method of failover for VDSL because they are delivered differently. VDSL service is provided and powered by a cabinet in your street - that's where the line terminates. ADSL service, on the other hand, comes all the way from your local exchange, which could be miles away and is powered from there. That means that if your street's VDSL cabinet is damaged, its DSLAM fails or you lose power to your street, you lose VDSL, but your ADSL line comes via a different method and route, so it's less likely that both would be affected.
What is WAN2 on a Vigor 2862?
WAN2 on the Vigor 2862 is an Ethernet port to which you can connect any Ethernet Internet feed (The port can also be used as LAN Port 5 instead). When used as WAN2, the port can connect to DrayTek's Vigor 130 DSL model in order to connect a second ADSL or VDSL line to the Vigor 2862. When the Vigor 2862 is used with the Vigor 130, the Vigor 2862 can report the DSL line statistics from the Vigor 130 in its own web interface (above) alongside the built-in DSL interface.
