How do I remotely manage a DrayTek router?
DrayTek routers can be managed remotely once management from the internet has been enabled. This is not enabled by default and must be enabled from [System Maintenance] > [Management]by enabling the Allow management from the Internetoption.
Why is my DrayTek router not connecting to the Internet?
If the address shown starts with 10.x.x.x, 172.16.x.x or 192.168.x.x, or if the router is known to be behind another NAT router, the DrayTek router may still be inaccessible from the internet. This can usually be resolved by forwarding the DrayTek router's management ports on the router that the DrayTek is receiving its WAN connection through.
How to configure regular mode in DrayTek LDAP?
In this example, we will use Regular Mode. Suppose Draytek LDAP server has OU People and OU RD1, RD2, RD3 under OU People, and the Users under OU RD1, RD2, RD3 are allowed for VPN Access. 2. Enter the IP address of LDAP/AD server at Server Address, and input Regular DN and Regular Password.
How do I remotely access the management interfaces on my router?
Once the router is online, the management interfaces enabled under the Internet Access Controlsection can be accessed remotely by accessing the router's WAN IP(s). The router's WAN IP can be checked from the [Online Status] > [Physical Connection]page, this will show the IP address under each of the WAN Statusheadings:
How do I access my DrayTek router remotely?
Open a browser, input https://[the router's WAN IP] in the address bar, and hit Enter. You should see the login page of the router's Web-based UI. (NOTE: If you changed the router's HTTPS port, specify the port number after the IP address.)
How do I log into my DrayTek modem?
Follow these instructions to login to your DrayTek Router .Connect router cable to your Laptop or Computer. ... Open your web browser of choice and type IP address of your DrayTek router in the address bar. ... Now enter the default username and password of your router by accessing the admin panel.
How do I connect to DrayTek VPN?
Confirm User Name and Password, and click OK to start the SSL VPN connection to Vigor Router....SSL VPN Setup on WindowsEnter Profile Name.Select "SSL VPN Tunnel" in Type.Enter Vigor Router's WAN IP in IP or Hostname.Enter User Name and Password.Enable Fast SSL.Click OK.
Is DrayTek any good?
DrayTek has always valued reliability over keeping up with cutting-edge network standards and that's reflected in the Vigor 2860AC. Despite the high price, it's only a 3x3 stream 802.11ac router offering speeds of up to 1,300Mbits/sec over 5GHz and 300Mbits/sec over 2.4GHz. Wireless performance isn't great either.
What is the IP address for DrayTek router?
192.168.1.1Usually, you can access the router's management page at 192.168. 1.1, which is the router's default LAN IP address.
What is the default password for a DrayTek router?
DrayTek Router Login Guide The default username for your DrayTek router is admin. The default password is admin.
What is DrayTek Smart VPN client?
The DrayTek Smart VPN Client for Microsoft Windows provides SSL VPN Tunnnel support and additionally supports PPTP, L2TP, IPsec, L2TP over IPsec with profiles for each VPN Tunnel. It supports Windows 7, Windows 8. x, Windows 10 and Windows XP. Available in the Router Tools section of the DrayTek UK Downloads page.
How do you use mOTP?
On the router, go to User Management>>User profile, and click add.Choose the interface you want to apply to.Enable Two-FA via mOTP.Enable Use mOTP, then enter the PIN code and the same Secret as Step 1.Click Apply.
How does SSL VPN Work?
An SSL tunnel VPN allows a web browser to securely access multiple network services that are not just web-based via a tunnel that is under SSL. These services could be proprietary networks or software built for corporate use only that cannot be accessed directly via the internet.
Is DrayTek a good firewall?
The DrayTek Vigor 2765 series VDSL and Ethernet VPN routers are ideal for Small Office and Home Office networks. Featuring powerful Firewall and Content Filtering, configurable Quality of Service and an array of VPN capabilities, with the performance to make full use of FTTP Fibre Broadband.
Is DrayTek router or firewall?
DrayTek have an extensive range of VPN Firewall routers that make full use of this synergy, to give great performance for regular Internet traffic, with its Category-based Content Filtering Firewall.
What is DrayTek vigor?
About DrayTek Today, we offer a complete range of enterprise network equipment for Internet connectivity, wireless networks, mesh Wi-Fi systems, switching, broadband routers, secure VPN, along with remote management tools.
How do I log into draytek vigor 130?
With that connected, the Vigor 130 modem's web interface can be accessed on http://192.168.2.1 with a username of "admin" and a password of "admin" by default. In the modem's web interface, go to [Internet Access] > [General Setup], on that page, the VLAN Tag insertion (VDSL2) setting will be enabled and set to 101.
How do I configure DrayTek router?
Access the DrayTek router's web interface via your web browser, which will be accessible on http://192.168.1.1 by default. Enter the username of "admin" and the default password of "admin". 2. Browse to [WAN] > [General Setup], click [WAN1] and set the VLAN Tag insertion (VDSL2) setting to Enable.
How do I reset my DrayTek router password?
Go to [System Maintenance] > [Admin Setting]. Enter the existing password in the Old Password box, then put the new password in both the New Password and Confirm Password boxes. Click OK to apply the change. The router will then display this message to indicate that the password has changed.
How do I change the IP address on my DrayTek router?
On LAN >> General Setup >> LAN 1 Details page, you can change the IP settings. Network Administrators may use any IP subnet that is preferred, as long as it does not conflict with the WAN IP settings. By default, Vigor Router uses the subnet 192.168. 1.0/255.255.
How to restrict remote access to a specific IP?
To restrict the remote access to a specific IP only, enable Access List then add the public IP of the remote host into the IP List. (The option should be disabled if the remote access peer doesn't have a static public IP. )
How to enable WAN access on router?
Make sure the WAN Interface is online, and the router has a public IP address. 2. Allow access from the Internet. Go to System Maintenance >> Access Control. At Internet Access Control, select “Enable” for the management interface you'd like to access from the Internet.
How to access the web management page on a router?
With the configuration above, you may access the router's web management page from the Internet by https:// [The Router's WAN IP].
How to see the login page of a router?
Open a browser, input https:// [the router's WAN IP] in the address bar, and hit Enter. You should see the login page of the router's Web-based UI. (NOTE: If you changed the router's HTTPS port, specify the port number after the IP address.)
Why is Vigor router disabled?
Vigor Router offers remote management access; however, it is disabled for security reason. If you would like to manage the router from the Internet, follow the steps below.
How to use LDAP for remote dial in?
After finishing the configuration of LDAP/AD profile, we can use it for Remote Dial-in clients. Navigate to VPN and Remote Access >> PPP General Setup >> PPTP. Select LDAP for User Authentication Type. Select the LDAP profile as the profile configured in step 2.
What does LDAP entry 0 mean?
If LDAP server replies Entry 0, it means the user account doesn't exist in the Base DN. If the user account exists, the LDAP server will respond with the Entry/Path. With the path, the router will send the bind request to the LDAP server for authenticating the user account.
What is the common name identifier for Vigor router?
Common Name Identifier: cn (Note: "cn" is the recommended settings. If Common Name Identifier is not set as "cn", Vigor Router will send filter with "cn=", "uid=", or "sAMAccountName=" by default)
What port is RDP listening to?
With the above settings, the connection requests sent to the router on port 11000, it will forward the request to private IP 192.168.1.10, and change the destination port will to 3389, which the RDP service is listening. Now, the clients from the Internet can access the server on router's LAN by router's WAN IP and the defined public port.
What protocol is used for RDP?
Choose the Protocol, for RDP service it's TCP.
What port is used for Vigor router?
The commonly used ports in Vigor router are TCP 80 (for web server), TCP 443 (for web server and SSL VPN), and TCP 21 (for FTP).
What is port redirection?
Port Redirection is a feature that redirects a connection request on a specific port of router's WAN to host on router's LAN. While traversing the NAT, the router can change the destination port. This document introduces how to set up port redirection on DrayTek Vigor Routers.
Can the network administrator specify the source IP in Port Redirection and Open Ports?
Since firmware version 3.8.4, the network administrator can specify the source IP in Port Redirection and Open Ports. This function can be used in the situation we only want to allow some of the IPs to access the server behind the router, and increase the level of security while allowing Internet access.
