1) On the Draytek router under VPN and Remote Access >> Remote Access Control make sure that only 'Enable SSL VPN service' is ticked. 2) Under VPN and Remote Access >> Remote Dial-in User ensure that only allowed dial-in type is SSL Tunnel. On the BT Hub forward an external TCP port to the Draytek's WAN IP address, Port 433 TCP.
Full Answer
How do I configure a DrayTek router for remote management?
A quick setup guide for remote management is located here: Configuring a DrayTek router for remote management Tick Allow management from the Internet to enable management over the internet on the interfaces selected. i.e. ticking HTTPS Server enables access to the router's HTTPS interface when accessing the router from the internet.
What ports does DrayTek use for VPN?
1 Port Forwarding TCP port 443 on DrayTek SSL VPN Routers. The SSL VPN facility on DrayTek routers that support SSL VPN uses TCP port 443 by default. ... 2 SSL VPN Port. ... 3 HTTPS Management Port. ... 4 Port Forwarding HTTPS - TCP Port 443. ...
Why is my DrayTek router not connecting to the Internet?
If the address shown starts with 10.x.x.x, 172.16.x.x or 192.168.x.x, or if the router is known to be behind another NAT router, the DrayTek router may still be inaccessible from the internet. This can usually be resolved by forwarding the DrayTek router's management ports on the router that the DrayTek is receiving its WAN connection through.
What is DrayTek port forwarding?
Founded in 1997, DrayTek is a Taiwanese company specializing in network hardware. In the list below you can find our DrayTek port forwarding guides. Simply select your router model. If you don't see your model listed in our database then we recommend finding one that looks similar.
How do I access my DrayTek router remotely?
Open a browser, input https://[the router's WAN IP] in the address bar, and hit Enter. You should see the login page of the router's Web-based UI. (NOTE: If you changed the router's HTTPS port, specify the port number after the IP address.)
How do I open ports on my DrayTek router?
How to Port Forward a Draytek RouterStep 1: Login to the Draytek router via the default gateway address.Step 2: Click on “NAT” and then “Port Redirection.”Step 3: Click on “1.”Step 4: Click “Enable.” Set the Mode to “Single.” Enter a Service Name, Public Port, Private Port and Private IP.More items...
What port does DrayTek use?
Open PortsCommentThis is used for display purposes to identify the NAT ruleStart PortThe port that will be opened to the Internet, this can be the same as the End Port if opening a single port entry i.e. 443 to 443 opens port 443 onlyEnd PortThe end port of the range of ports that will be opened to the Internet4 more rows•Nov 3, 2016
How can I see what ports are open?
Answer: From the Control Panel, navigate to System and Security, and click on Windows Firewall. Go to the Advanced settings and right-click on Inbound Rules on the left pane. Select New Rule, add the port and click Next. Pick the Protocol and the Port Number, click Next again.
Does DMZ forward all ports?
A home router DMZ host is a host on the internal network that has all UDP and TCP ports open and exposed, except those ports otherwise forwarded. They are often used a simple method to forward all ports to another firewall/NAT device.
What is public port and private port?
The "public" port is the port which appears on the Internet side. When remotely connecting you will use that port. The "private" port is the port used to connect to the device on your LAN. If you wanted to host a web page your computer would default to using port 80.
How do I open a port on a WAN?
Near the center, find the Index Number link, click on it.Go to the Mode drop-down box.Click on Range to forward a range of ports.To forward a single port, click on Single.In the Service Name box, type a name for your service.Select the protocol type (TCP/UDP).From the WAN IP drop-down box, select All.More items...•
How do I port forward Nat?
To forward ports on your router, log into your router and go to the port forwarding section. Next, enter the port numbers and your device's IP address. Choose a forwarding protocol and save your changes. Note: If you don't see a port forwarding option in your router's settings, you might have to upgrade.
How do I enable LAN 2 on draytek?
At the page of LAN >> General Setup, check the "Enable" box of LAN2 and LAN3. Then click OK to save the configuration and reboot the router.
How do I check if a port is open on a remote server?
Type "Network Utility" in the search field and select Network Utility. Select Port Scan, enter an IP address or hostname in the text field, and specify a port range. Click Scan to begin the test. If a TCP port is open, it will be displayed here.
What ports should not be open?
Here are some common vulnerable ports you need to know.FTP (20, 21) FTP stands for File Transfer Protocol. ... SSH (22) SSH stands for Secure Shell. ... SMB (139, 137, 445) SMB stands for Server Message Block. ... DNS (53) DNS stands for Domain Name System. ... HTTP / HTTPS (443, 80, 8080, 8443) ... Telnet (23) ... SMTP (25) ... TFTP (69)
Are open ports a security risk?
Open ports become dangerous when legitimate services are exploited through security vulnerabilities or malicious services are introduced to a system via malware or social engineering, cybercriminals can use these services in conjunction with open ports to gain unauthorized access to sensitive data.
How do I block ports on my draytek router?
Click Edit at Service Type and select the profile created in step 1. Select "Block Immediately" for Filter. You may also check Syslog if you want the router to generate logs about this rule....Block FTP Service by FirewallType the profile name as "FTP"Set Protocol to "TCP"Set the Destination Port to "= 21 - 21"
How do I open a port on a WAN?
Near the center, find the Index Number link, click on it.Go to the Mode drop-down box.Click on Range to forward a range of ports.To forward a single port, click on Single.In the Service Name box, type a name for your service.Select the protocol type (TCP/UDP).From the WAN IP drop-down box, select All.More items...•
How do I enable LAN 2 on draytek?
At the page of LAN >> General Setup, check the "Enable" box of LAN2 and LAN3. Then click OK to save the configuration and reboot the router.
What is port forwarding?
Port forwarding defined Port forwarding, sometimes called port mapping, allows computers or services in private networks to connect over the internet with other public or private computers or services.
What port is used for Vigor router?
The commonly used ports in Vigor router are TCP 80 (for web server), TCP 443 (for web server and SSL VPN), and TCP 21 (for FTP). To avoid port conflicts, please change the ports in Management page ( or access control setting page for Vigor3900/2960 ) or disable those local services ...
What port does the router forward to?
3. With the above settings, when the connection requests sent to the router on port 3389, the router will forward the request to private IP 192.168.1.10. Now, the clients from the Internet can access the server on router's LAN by router's WAN IP and the defined public port.
What is open port?
Open Port is a feature that redirects a connection request on several ports of router's WAN to host on router's LAN. While traversing the NAT, Open Port will not change the destination port. This document introduces how to set up open port on Vigor Router and some troubleshooting tips if it's not working as expected.
How to add a new profile to NAT?
1. Go to NAT >> Port Redirection, and click on an available index to add a new profile. 2. Edit the profile as follows: Check Enable Open Ports. Enter Comment for identification. Choose Interface from which the Internet connection is coming. Enter Private IP as the LAN IP of the computer for RDP access.
What does capture the router's LAN/WAN packets do?
Capture the router’s LAN/WAN packets to find out which host does not respond.
Can the network administrator specify the source IP in Port Redirection and Open Ports?
Since firmware version 3.8.4, the network administrator can specify the source IP in Port Redirection and Open Ports. This function can be used in the situation we only want to allow some of the IPs to access the server behind the router, and increase the level of security while allowing Internet access.
Is there a static route policy?
There are no static route or route policy rules on the router that will route the server to the wrong gateway.
What port is RDP listening to?
With the above settings, the connection requests sent to the router on port 11000, it will forward the request to private IP 192.168.1.10, and change the destination port will to 3389, which the RDP service is listening. Now, the clients from the Internet can access the server on router's LAN by router's WAN IP and the defined public port.
What is port redirection?
Port Redirection is a feature that redirects a connection request on a specific port of router's WAN to host on router's LAN. While traversing the NAT, the router can change the destination port. This document introduces how to set up port redirection on DrayTek Vigor Routers.
What port is used for Vigor router?
The commonly used ports in Vigor router are TCP 80 (for web server), TCP 443 (for web server and SSL VPN), and TCP 21 (for FTP).
What router must point to Vigor?
The server's gateway must point to the Vigor router. There are no static route or route policy rules on the router that will route the server to the wrong gateway. There are no firewall rules on the router that will block the connection between the Internet client and the server.
What protocol is used for RDP?
Choose the Protocol, for RDP service it's TCP.
What does capture the router's LAN/WAN packets do?
Capture the router’s LAN/WAN packets to find out which host does not respond.
How to add a new profile to NAT?
1. Go to NAT >> Port Redirection, and click on an available index to add a new profile. 2. Edit the profile as follows: Check Enable. Select Range mode. Enter a Service Name for identification. Choose the Protocol, for HTTP service it's TCP.
Where to find WAN IP address?
The router's WAN IP can be checked from the [Online Status] > [Physical Connection]page, this will show the IP address under each of the WAN Statusheadings:
Can Draytek routers be remotely managed?
DrayTek routers can be managed remotely once management from the internet has been enabled. This is not enabled by default and must be enabled from
What port does DrayTek use for VPN?
The SSL VPN facility on DrayTek routers that support SSL VPN uses TCP port 443 by default. With current firmware, if the router's SSL VPN service is enabled or if the router's is configured for remote management, the router may give this error message when configuring an Open Ports or Port Redirection entry using TCP port 443:
How to change port 443?
Go to [SSL VPN] > [General Setup] , set the Portsetting from its default of 443 to another port, in this example, the port has been changed to 444. Changing this setting does not require restarting the router and will take effect after clicking OKon this page.
How to port forward TCP port 443?
To port forward TCP port 443, go to [NAT] > [Open Ports] and click on the first un-used index entry to go into the settings for that Open Ports entry. Enter a name for the port forward entry to identify it in the Comment setting. Tick " Enable Open Ports " to enable this open ports entry.
How to forward TCP 443 to internal server?
To forward traffic on TCP 443 (HTTPS) to an internal server, it will be necessary to change the router's SSL VPN port so that the port forwarding can operate . If remote management is enabled on the router, it will also be necessary to change the router's HTTPS management port.
What IPsec is used for NAT-T?
IPsec: UDP 500 and UDP 4500 if NAT-T is used (the router will also forward ESP IP50 automatically)
How to set up VPN on Vigor router?
To do this, you will need: 1. Disable the VPN service on the router: Go to VPN and Remote Access >> Remote Access Control Setup, un-check the VPN protocol that you want to forward to the router's LAN. 2.
Can L2TP tunnel through NAT?
To pass through multiple outgoing IPsec tunnels, it requires that both the VPN client and server support NAT-Traversal (NAT-T). Without NAT-T, it only allows one outgoing IPsec VPN at the same time. L2TP with IPsec policy is in transport mode, which can only pass through NAT if both VPN client and server support NAT-T ...
How to allow IP ranges?
To allow IP ranges, set the network address of the range in the IP field and specify the subnet mask of that range.
What type of encryption does a router use?
Routers that display this option are using TLS for HTTPS management and SSL VPN encryption.
