- Create a LAN-to-LAN VPN Profile: Go to VPN and Remote Access >> LAN to LAN, click on a profile Index to add/edit a profile.
- Edit the profile as follows: Enter Profile Name. ...
- Go to VPN and Remote Access >> Remote Access Control to make sure the SSL VPN Service has enabled.
What is VPN LAN to LAN?
LAN-to-LAN VPN provides a secure and encrypted network connection for business transactions conducted between users and systems on one LAN to users, systems, and applications located on another LAN.
How do I enable LAN 2 on DrayTek?
At the page of LAN >> General Setup, check the "Enable" box of LAN2 and LAN3. Then click OK to save the configuration and reboot the router.
How do I access my DrayTek router remotely?
Open a browser, input https://[the router's WAN IP] in the address bar, and hit Enter. You should see the login page of the router's Web-based UI. (NOTE: If you changed the router's HTTPS port, specify the port number after the IP address.)
How do I connect to DrayTek VPN?
Confirm User Name and Password, and click OK to start the SSL VPN connection to Vigor Router....SSL VPN Setup on WindowsEnter Profile Name.Select "SSL VPN Tunnel" in Type.Enter Vigor Router's WAN IP in IP or Hostname.Enter User Name and Password.Enable Fast SSL.Click OK.
What is IP routed subnet DrayTek?
Non-NAT configuration (IP Routed subnet) allows using public IP addresses on LAN and bypassing NAT. You can mix public and NATted IP addresses on your LAN, so that some PCs are on your private (NATted) subnet and others have real public IP addresses. In this example the ISP has given the connection the subnet 218.25.
How do I configure DrayTek router?
Access the DrayTek router's web interface via your web browser, which will be accessible on http://192.168.1.1 by default. Enter the username of "admin" and the default password of "admin". 2. Browse to [WAN] > [General Setup], click [WAN1] and set the VLAN Tag insertion (VDSL2) setting to Enable.
How do I control users on my router?
To set up access control:Launch a web browser from a computer or mobile device that is connected to your router's network.Enter the router user name and password. ... Select ADVANCED > Security > Access Control.Select the Turn on Access Control check box.More items...•
What is the IP address for DrayTek router?
192.168.1.1Usually, you can access the router's management page at 192.168. 1.1, which is the router's default LAN IP address.
How do I get vigor 130 in bridge mode?
The Configuration of Vigor130 1. Go to Internet Access >> General Setup, enable VLAN Tag Insertion but leave Tag Value as "0". 2. Go to Internet Access >> MPoA / Static or dynamic IP, enable Bridge mode.
Is DrayTek SSL VPN secure?
Stronger security than PPTP DrayTek's SSL VPN operates with TLS security, supporting TLS versions 1.0, 1.1 and 1.2 (depending on router firmware) with up to AES-256 bit encryption.
What is DrayTek Smart VPN client?
DrayTek VPN provides a friendly user interface for VPN setup. It takes only a few steps to connect all the sites, and there's no need for changing firewall rules and routing policies.
How does SSL VPN Work?
An SSL tunnel VPN allows a web browser to securely access multiple network services that are not just web-based via a tunnel that is under SSL. These services could be proprietary networks or software built for corporate use only that cannot be accessed directly via the internet.
How do I log into draytek vigor?
How to login my Vigor RouterConnect a computer to one of the router's LAN ports by an Ethernet cable.Make sure the network interface is using an IP in the 192.168. ... Open a browser on the computer. ... After logging in, you will access the management page of the router.
How do I log into draytek vigor 130?
With that connected, the Vigor 130 modem's web interface can be accessed on http://192.168.2.1 with a username of "admin" and a password of "admin" by default. In the modem's web interface, go to [Internet Access] > [General Setup], on that page, the VLAN Tag insertion (VDSL2) setting will be enabled and set to 101.
How do I change my draytek WIFI password?
Go to [System Maintenance] > [Admin Setting]. Enter the existing password in the Old Password box, then put the new password in both the New Password and Confirm Password boxes. Click OK to apply the change. The router will then display this message to indicate that the password has changed.
What is LAN open port?
Open Port is a feature that redirects a connection request on several ports of router's WAN to host on router's LAN. While traversing the NAT, Open Port will not change the destination port.
How to set up a dial in VPN?
1. Create a LAN-to-LAN VPN Profile: Go to VPN and Remote Access >> LAN to LAN, click on a profile Index to add/edit a profile. 2. Edit the profile as follows: Enter Profile Name. Enable this profile. Set Call Direction as “Dial-in”.
How to dial out VPN?
VPN Client (Dial-out Site) Setup 1 Enter Profile Name. 2 Enable this profile. 3 Set Call Direction to “Dial-out”. 4 Set Type of Server I am calling to SSL Tunnel. 5 Enter Username and Password as the same set in VPN Client in Step 2. 6 Enter VPN Server's WAN IP in Server IP/Host Name. 7 Enter Remote Network IP/Mask as VPN Server's LAN settings. (Note that this has to be the same as Local Network IP/Mask setting in Step 2.) 8 Click OK to save.
How to create a VPN profile?
1. Create a user profile for SSL VPN login. Go to User Management >> User Profile, click Add to create a new profile. 2. Edit the user profile as follows: Enter Profile Name. Enable this profile. Enter Password. In PPTP/L2TP/SSL Server, enable SSL Tunnel.
Does Vigor2860 have VPN?
LAN-to-LAN SSL VPN feature will be supported by Vigor2860 series starts from firmware version 3.8.1 and Vigor2925 series starts from firmware version 3. 8.2. As for other models, please refer to their specifications.
How to check VPN connection?
Go to VPN and Remote Access >> Connection Management to dial the VPN and check the VPN connectivity. 1. Go to User Management >> User Profile, click Add to create a new profile: Click Apply to save the profile. 2. Go to VPN and Remote Access >> VPN Profile >> PPTP Dial-In, click Add to create a new profile:
How to add PPTP password to VPN?
2. Go to VPN and Remote Access >> VPN Profile >> PPTP Dial-In, click Add to create a new profile: Click Apply to save the profile. 3. Go to VPN and Remote Access >> VPN Profile >> PPTP Dial-Out click Add to create a new profile: Enter PPTP User Name and PPTP Password as the same as step 1.
How to configure LAN to LAN VPN Tunnel to Route all Internet Traffic to Private Internet Access (PIA)
This application note describes how to route all internet traffic via the Private Internet Access (PIA) VPN service using LAN to LAN VPN tunnel configuration. This configuration applies to DrayOS routers (DV2760, DV2912, DV2860, DV2925, DV2952, and DV3220)
Step 1
Access your Private internet access account under PPTP/L2TP/SOCK Username and Password click “Regenerate Username and Password”.
Step 2: Configure DrayTek Router
Enable the VPN Profile set the call direction to Dial-Out and select Always on.
What is the ZTE LAN address?
Everything works in terms of internet access. I can connect to either the ZTE LAN (with an address of 192.168.10.x "infront" of the FW) or the draytek LAN (192.168.1.x i.e. "behind" the FW)
What is ZTE router IP address?
We have a ZTE router supplied by the ISP which has a fixed external ip of x.x.x.x This routers LAN address is 192.168.10.1 , and provides DHCL to LAN hosts from 192.168.10.10 onwards.
