- Enter Profile Name.
- Select "SSL VPN Tunnel" in Type.
- Enter Vigor Router's WAN IP in IP or Hostname.
- Enter User Name and Password.
- Enable Fast SSL.
- Click OK.
How do I access my DrayTek router remotely?
Open a browser, input https://[the router's WAN IP] in the address bar, and hit Enter. You should see the login page of the router's Web-based UI. (NOTE: If you changed the router's HTTPS port, specify the port number after the IP address.)
Does DrayTek support OpenVPN?
Latest DrayTek Vigor routers support the OpenVPN Dial-Out function since firmware version 4.2. 1. This VPN protocol can be used for encrypted tunelling with other DrayTek router, and it's potentially compatible with other vendors.
Where is the pre shared key in DrayTek?
IKEv2 VPN between DrayTek Routers Go to VPN and Remote Access >> IPsec General Setup, Input Pre-shared Key Confirm Pre-Shared Key Click OK 2.
What is DrayTek bridge mode?
Bridge Mode. In this mode, the modem passes through the PPPoE or DHCP/Static IP connection directly to any connected LAN devices. This does not require the connected router to provide a VLAN tag if the ISP requires it.
How do I get pre-shared key for VPN?
We'll teach you how to find the Pre-Shared Key in a few easy steps:Press the Win key on your keyboard.Type VPN.Click VPN settings.Select your secured VPN connection from the list.Click Advanced options.Press the Edit button.Select L2TP/IPsec with pre-shared key from the VPN type menu.More items...•
What is the pre-shared key for VPN?
Pre-shared keys A pre-shared key is the default authentication option. A pre-shared key is a Site-to-Site VPN tunnel option that you can specify when you create a Site-to-Site VPN tunnel. A pre-shared key is a string that you enter when you configure your customer gateway device.
How long should a VPN pre-shared key be?
Since the PSKs must be configured on each side only once, it should be no problem to write 20-40 letters on the firewall.
How do I enable draytek Bridge mode?
Configuring Vigor2760 for VDSL Bridge modeGo to “Internet Access >> MPoA / Static or dynamic IP” configuration menu. ... Select “Enable”On the bottom left (Bridge Mode selection), enable the “Enable Bridge Mode”Click OK to save.
How do I get vigor 130 in Bridge mode?
The Configuration of Vigor130 1. Go to Internet Access >> General Setup, enable VLAN Tag Insertion but leave Tag Value as "0". 2. Go to Internet Access >> MPoA / Static or dynamic IP, enable Bridge mode.
How do I connect my draytek router to another router?
0:495:21Connecting a DrayTek Vigor Router to the Internet via ADSL - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe'll start with the Vig or two 860 router the first step is to check the physical connections toMoreWe'll start with the Vig or two 860 router the first step is to check the physical connections to the router ensure. The power is connected plug in the ADSL line to the router.
How do I update my vigor 130 firmware?
Upgrade Firmware remotely by Vigor Web UI. Go to System Maintenance >> Firmware Upgrade page.
How to set up Vigor router?
Setup on Vigor Router. 1. Make sure the router is connected to the Internet and has a public WAN IP address so that VPN clients on the Internet can reach it. 2. At VPN and Remote Access >> Remote Access Control, make sure "SSL VPN Service" is enabled. 3.
How to save a VPN profile?
Make sure the router is connected to the Internet and has a public WAN IP address so that VPN clients on the Internet can reach it. 2. At VPN and Remote Access >> Remote Access Control, make sure "SSL VPN Service" is enabled. 3.
Where to find WAN IP address?
The router's WAN IP can be checked from the [Online Status] > [Physical Connection]page, this will show the IP address under each of the WAN Statusheadings:
Can Draytek routers be remotely managed?
DrayTek routers can be managed remotely once management from the internet has been enabled. This is not enabled by default and must be enabled from
What is VPN in London?
V. VPN (Virtual Private Networking) Above, is a simple example of a VPN between two offices. One in London, the other in Liverpool. Each private LAN is on a private subnet as shown. Those private address ranges are not visible to the internet - they are only reachable through the VPN tunnel, and that tunnel will only carry data to its preset ...
Can you use a VPN on Vigor?
If it is not online when contact is attempted, the tunnel cannot be made. You can use the remote activation facility on the Vigor to assist. Of course, a VPN doesn't have to have mutual initiation - i.e. either LAN can start the connection to the other.
