Remote-access Guide

dvr remote access software ip or port is invalid

by Mr. Wilson Marquardt PhD Published 3 years ago Updated 2 years ago
image

If the DVR can't get an IP from the router, chances are the router does not have the automatic IP settings also known as DHCP (Dynamic Host Configuration Protocol) enabled. You can either check your router and enable such feature or give the DVR a static IP address.

Full Answer

How do I setup remote Internet access for the JPEG DVR?

Please follow these setup instructions to setup remote Internet access for the dual codec JPEG DVR: Assign your DVR an IP Address. Connect to your DVR on your LAN - Local Area Network. Setting up Port Forwarding on your Router. Setting up a Static DHCP IP address for your DVR.

Does the internet connection at the location of my DVR/IP camera?

Does the Internet connection at the location of your DVR or IP camera use a dynamic IP address? If yes, you need to setup a DDNS account. Some DVRs and IP cameras has a DDNS service built into them. You can learn more about DDNS here.

How do I access the DVR from outside the network?

To access the DVR from outside the network or externally, the steps will be the same but the IP address will be your external IP address. You can find your external IP address by going to www.canyouseeme.org from the same network where the DVR is.

How to do port forwarding With DVR's IP address?

Go to the router‘s page to do port forwarding with DVR‘s IP, HTTP port, and media port. Here is the method on how to find DVR‘s IP address, http port, and media port. Here is instruction on how to do port forwarding: Finally, if DDNS and port forwarding succeed, address like http://annke2015.ddns.net:8888 can be opened anywhere on any computer.

image

How do I find my DVR port number?

0:084:26How to open DVR ports on your Router Part 1 - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo find out what your IP is scheme is in this case is it belongs to the same network as my DVRMoreTo find out what your IP is scheme is in this case is it belongs to the same network as my DVR normally we ship the DVR with the IP 192 dot 168 that one that 108.

How do I find the IP address for my DVR?

0:152:10How to check the IP address of your NVR or DVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical passwordMoreSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical password log in. And go to network then go to tcpip. Under network and tcp it'll give you an ip address.

How do I access my DVR agent remotely?

Agent DVR uses WebRTC to setup remote connections so doesn't require any port forwarding setup and will work even over mobile internet connections. To connect remotely you will need to pair Agent with your iSpyConnect account. To do this, click on the account icon in the local web interface and "Remote Access".

How can I access my DVR without port forwarding?

How to view a WinBook DVR Remotely Without Port ForwardingMake sure the WinBook DVR is connected to the router with an Ethernet cable.Right click and select Main Menu.Log in to the DVR. ... Click Advanced.Click Network.Set type to DHCP.Click UPNP.Enable UPNP and click OK.More items...

Why is my DVR not connected to network?

If you have connected your DVR / NVR to your network router and it is not getting an Internet connection, or a valid IP address, check your Ethernet cable connection, router port settings, or DHCP / IP settings.

How do I connect my DVR to my network?

Getting StartedMake sure that your Modem is connected to the internet. ... Connect your modem to the internet port on your router. ... Connect your DVR to one of the data ports of your router. ... Connect your DVR to your monitor.

How do I set up DVR agent?

Agent DVRBrowse to your Home Assistant instance.In the sidebar click on Settings.From the configuration menu select: Devices & Services.In the bottom right, click on the Add Integration button.From the list, search and select “Agent DVR”.Follow the instruction on screen to complete the set up.

How do I uninstall iSpy?

Most of the computer programs have uninstall.exe or uninst000.exe in their installation folders.Go to the installation folder of iSpy. Most of the times it is located in C:\Programs files or C:\Program files(x86)Double click the file to start the uninstallation process.

Can iSpy connect to DVR?

The settings for Dvr cameras are built right into our free surveillance software - the inbuilt wizard will automatically setup your Dvr cameras. Remember to also try connecting via ONVIF as Dvr cameras may support ONVIF connections as well.

How do I setup port forwarding on my DVR?

1:326:37Port Forwarding Setup For Remote Access NVR/DVR - YouTubeYouTubeStart of suggested clipEnd of suggested clip1. And the land port given is the 82 these two ports are already configured in the particular deviceMore1. And the land port given is the 82 these two ports are already configured in the particular device dot as the user can choose different LAN port and land port.

What port is DVR?

This DVR uses two ports: 80 and 6100 (by default). You will need to forward both of these ports to the LAN IP address of your DVR, using two separate Port Forwarding entries. Some routers will have the ability to forward a range of ports.

Does DVR have IP address?

The default login information can be found on a label attached to the top of the NVR or DVR. Click the Network option under the Setting section of the main menu. The default tab is the TCP/IP tab where the IP address setting is located.

Does a DVR have an IP address?

If you are unsure of what your DVR LAN IP address is, you can find this by accessing the Network Setup menu from the DVR. Press the 'Setup' button. Enter the system password and press 'Enter'. Select 'System Setup' and press 'Enter'.

How do I see IP addresses on my network?

Follow these four simple steps to scan your network for IP addresses in use:Open a Command Prompt window.On Windows or macOS type ipconfig or on Linux type ifconfig. ... Enter the command arp -a to get a list of all other IP addresses active on your network.More items...•

How can I see my CCTV IP address online?

HTTP://192.168.1.101 represents the IP address of the camera being accessed.Find your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.More items...•

What is IP address for CCTV?

The default IP address of a security camera recorder from CCTV Camera World is 192.168. 1.108. Your IP address may be different because of two possible reasons: If you have enabled DHCP for the QR code based remote viewing method your recorder is getting an IP address from your router.

What is the IP address of a DVR?

By default ALL of our recorders and IP cameras have the same IP address. The default IP address is 192.168.1.108.

What happens if you assign an IP address to a DVR?

This is due to the fact that if you assign an IP address to the DVR, NVR or IP camera that is already being used by a computer (hard wired or wireless), printer, or even a wireless handheld device you will have a collision in your network and you will not be able to access the device. In the next step I will show you how to see what IP addresses are available for you to use with your Digital Video Recorder.

How to access DVR from outside network?

The default username is admin and the password is admin. Click login, then you will see the page of your Web Service. To access the DVR from outside the network or externally, the steps will be the same but the IP address will be your external IP address.

How to know if your DVR is on the same network as your home network?

First, you must review your network scheme to identify if your DVR or IPC (IP camera) is within the same network scheme as your Home/Office Network. There are a few ways to identify your network by simply going to the “Command Prompt” in your Windows PC.

What does success port 37777 mean?

As you can see, I am testing the port 37777. The result says SUCCESS! That means that the port is properly forward to the DVR TCP port. You can do the same steps to test the HTTP port of the DVR.

What is the default IP address for a router?

For example Linksys routers (better known as Cisco) use a default IP addresses of 192.168.1.1, other manufacturers will use 192.168.1.254. This info you will be able to find by identifying your network scheme like I ...

How to get terminal without quotes?

For Apple users, go to the top right corner and type in the spotlight window the word “terminal” without quotes and hit return. , or click the Command key next to the “Alt” key and the space bar to bring up the picture above. Type “terminal” without quotes and a window will show up like the picture below:

How to set up a DVR for remote viewing?

Below are step by step instructions to setup your DVR or IP Camera for remote viewing. 1.) First Make sure your DVR or IP Camera support remote viewing. 2.) Second you need to obtian the ip address and the port of your DVR or IP camera. Typically you can find this under network within the system menu of your DVR or IP camera.

Can CCTV cameras be emailed?

Although CCTV Camera Pros only can provide phone, email, and online chat based technical support for the DVRs that we supply.

Does CCTV Camera Pros carry AVtech DVRs?

I am sorry but CCTV Camera Pros does not carry AVtech DVRs. If it ends up not working out for you, you may want to check out our iDVR which is one of the best DVRs on the market for remote Internet viewing, including iPhone, Android, and iPad:

How to log into DVR?

Login to your DVR by pressing the menu button on the DVR or on the wireless remote control. When you are prompt to enter a password, just press the OK button on the DVR or remote. The default admin password for the DVR is blank. If you have already setup an admin password for your DVR, then enter this, then press OK.

What port is used for DVR?

Remember: Your DVR is going to use port 8000 (not 50000). 50000 was the default port for legacy non-dual codec DVRs).

What is a DVR receiver?

The DVR software that was included with JPEG DVRs is called the integrated remote station (IRS). One of the applications in the IRS is a transmitter that allows you to watch your security cameras over the Internet or Intranet (internal network / LAN). The transmitter is meant to replace the DVR viewer that was used in the last version ...

How to setup DHCP on DVR?

From your DVRs System menu, select External Device. On the External Device menu, select TCP/IP Setup. On the TCP/IP Setup screen, select DHCP setup and press enter.

What is the default port for a DVR?

On the IP config setup screen, confirm the port number of your DVR as seen below. The default port is 8000. If your DVR is not set to port 8000, please edit this value to set to 8000. NOTE: please ignore that the below screen shot shows port 50000. Port 50000 was used for the last version of the JPEG DVR.

How to connect Manul to DVR?

On the main IRS screen, click on the IRS Setup button. On the IRS Setup screen, click on the Registering Site button. This will open a new Window where you can add the settings to connect to your DVR. This screen can be seen below. A) Select Manul for CONNECTION.

How to see live view on DVR?

Press the Menu several times on your DVR or remote until you exit out of the DVR menu system and see the live view of your cameras.

What is the default port for a DVR?

On the IP config setup screen, confirm the port number of your DVR as seen below. The default port is 50000.

What is the DVR viewer software?

The DVR viewer software runs only Microsoft Windows based computers. The iDVR-PRO includes software for Mac and Windows, as well as mobile apps for iOS and Android. The instructions to setup the DVR viewer are broken up into the following sections, which include router and network setup instructions.

What software does a JP surveillance camera use?

Our JP Surveillance DVRs come with remote surveillance viewer software that allows you to view your security cameras over the Internet. The JP DVR viewer also lets you review previously recording surveillance video footage. The software was included on a CD that shipped with these DVRs when they were being sold. Please note: these DVRs have been replaced by CCTV Camera Pros iDVR-PRO. The surveillance software for the JP DVR can still be downloaded here: DVR Viewer Software Downloads. The DVR viewer software runs only Microsoft Windows based computers. The iDVR-PRO includes software for Mac and Windows, as well as mobile apps for iOS and Android.

How to set DHCP to auto?

With the DHCP mode set to automatic, your DVR will allow your router to assign it an IP address. While still on the DHCP setup screen, select Detect IP and press enter. The screen should refresh.

What is dynamic DNS?

Dynamic DNS is used to when the Internet connection you will be using for your DVR uses a dynamic IP address. If you are unsure if your Internet service provider (ISP) provides you with a dynamic or static IP address, please call or email your ISP's technical support department. CCTV Camera Pros has instructions for D-Link and LinkSys routers. The instructions are based on certain models but are likely the same or close to the same for other models of D-Link and LinkSys routers and switches. If you need specific instructions for you router, please consult the manual that came with it and look under the section that has to do with Dynamic DNS support. Most modern router/switches support dynamic DNS.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9