enable remote access for user server 2008

• Open the DirectAccess Management console from the Administrative Tools menu on the computer running Windows Server 2008 R2. This console is shown in Figure 9-4. Figure 9-4 DirectAccess Management console
• Select the Setup node. In the details pane, in the Remote Clients area, click Configure. This opens the DirectAccess Client Setup dialog box. ...
• Use the DirectAccess Server Setup item to specify which interface is connected to the Internet and which interface is connected to the internal network. ...
• On the Infrastructure Server Setup page, you specify the location of the internal website (known as the Network Location Server) that DirectAccess clients attempt to contact to determine whether they ...
The final step involves specifying which resources on the corporate intranet are accessible to DirectAccess clients. The default setting is to allow access to all resources. ...
When you click Finish, DirectAccess interfaces with a domain controller and creates two new GPOs in the domain. ...

How do I enable remote desktop on my server?

On the right side of your Server Manager window, you will see a link to Configure Remote Desktop under Computer Information. Click on this link to view your Remote Desktop settings. Normally, all servers have Remote Desktop enabled for all users.

How do I configure and monitor a VPN remote access server?

In this lesson, you will learn how to configure and monitor a VPN remote access server running Windows Server 2008 and Windows Server 2008 R2. To install the RRAS role service, use the Add Roles Wizard and then select Network Policy And Access Services. RRAS is a role service within this role.

How do I get Remote Desktop Services (RDS)?

Learn step by step how to get Remote Desktop Services (RDS) and some of the basic RDS components up and running. Launch Server Manager and select Server Roles. Once the roles manager screen is up, check the box for Remote Desktop Services.

How to remotely connect to a Windows computer?

To make sure that your system can remotely connect, go to Computer (My Computer) Properties from the right-click context menu to enable incoming remote desktop connections. Click on Advanced System Settings and move over to the Remote tab.

How do I enable remote access to users?

Allow Access to Use Remote Desktop ConnectionClick the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•

How do I allow remote users to access my network Windows server?

Click Start, point to Administrative Tools, and then click Routing and Remote Access. Double-click Your_Server_Name, and then click Remote Access Policies. Right-click Connections to Microsoft Routing and Remote Access server, and then click Properties. Click Grant remote access permission, and then click OK.

How do I remotely enable remote access to my server?

Steps How to Windows Server Enable Remote Desktop (RDP)Launch the Start menu and open Server Manager. ... Click on the Local Server on the left hand side of the Server Manager window. ... Select the Disabled text. ... Click on Allow remote desktop connections to this Computer on the System Properties window.More items...•

How do I give someone access to my server?

ProcedureLog in to Microsoft Windows Server as an administrator.Create a group. Click Start > Control Panel > Administrative Tools > Active Directory and Computers. ... Configure the server to allow local users and the DataStage group to log in. ... Add users to the group. ... Set permissions for the following folders:

How do I enable Remote Access on Windows?

Set up the PC you want to connect to so it allows remote connections:Make sure you have Windows 10 Pro. ... When you're ready, select Start > Settings > System > Remote Desktop, and turn on Enable Remote Desktop.Make note of the name of this PC under How to connect to this PC.

How do I enable Remote Access and routing?

Right-click the server, and then click Configure and Enable Routing and Remote Access to start the Routing and Remote Access Server Setup Wizard. Click Next. Click Remote access (dial-up or VPN) to permit remote computers to dial in or connect to this network through the Internet.

How can I access a server from outside the network?

Use a VPN. If you connect to your local area network by using a virtual private network (VPN), you don't have to open your PC to the public internet. Instead, when you connect to the VPN, your RD client acts like it's part of the same network and be able to access your PC.

How do I know if Remote Desktop is enabled remotely?

The most intuitive way to enable Remote Desktop on Windows is to use a GUI. To enable RDP on a local computer, you need to open the “System” Control Panel item, go to the “Remote Settings” tab and enable the Allow remote connections to this computer option in the Remote Desktop section.

What is remote admin access?

Alternatively referred to as remote administration, remote admin is way to control another computer without physically being in front of it. Below are examples of how remote administration could be used. Remotely run a program or copy a file. Remotely connect to another machine to troubleshoot issues.

How do I grant access to another computer on my network?

Setting PermissionsAccess the Properties dialog box.Select the Security tab. ... Click Edit.In the Group or user name section, select the user(s) you wish to set permissions for.In the Permissions section, use the checkboxes to select the appropriate permission level.Click Apply.Click Okay.

How do I give RDP to a user in Windows Server 2019?

Allowing Remote Desktop Service from Server Manager GUI Open Server Manager from the Start menu. Click on the “Local server” on the left section. Click on the “Remote Desktop” disable button. Agree to Remote Desktop firewall exception warning and add users to allow by clicking on “Select Users“.

Planning Your Terminal Services Gateway SSL Certificate

Because clients use HTTPS to connect to the TS Gateway, the TS Gateway will need an SSL certificate — just like an electronic-commerce Web server.

Configuring the Terminal Services Gateway

To add the Terminal Services Role to Windows Server 2008, follow these steps:

Configuring the Remote Desktop Client

You must configure the Remote Desktop Client with the IP address of the TS gateway before connecting to a Remote Desktop server on your internal network. To configure the Remote Desktop Client, follow these steps:

Need More Help?

For more information about Terminal Services in Windows Server 2008, visit technet2.microsoft.com/windowsserver2008/en/servermanager/terminalservices.mspx.

What is Server Manager 2008 R2?

Server to server – Server Manager on a full installation of Windows Server 2008 R2 can be used to manage roles and features that are installed on another server that is running Windows Server 2008 R2.

Can you remotely manage a server 2008 R2?

Windows Server 2008 R2, unlike Windows Server 2008 RTM, has a nice feature that allows you to remotely manage it, from another server or from a Windows 7 workstation , by using Server Manager.

Can you use Server Manager in Windows Server 2008 RTM?

Note: Windows Server 2008 RTM also has remote management capabilities. You can easily manage these servers by using almost any MMC Snap-In. However, the fact that you can use Server Manager to do it is new in R2.

How to enable remote access to a server?

To enable Remote Access, open the Routing and Remote Access console from the Administrative Tools menu, right-click the computer running Windows Server 2008 R2 that you want to host this role, and then click Configure And Enable Routing And Remote Access. Performing this action starts the Routing And Remote Access Server Setup Wizard. The configuration page of this wizard, shown in Figure 9-1, allows you to select the combination of services that this particular server will provide. The Remote Access (Dial-Up Or VPN) option is selected when you want to provide either remote access option or both options to clients outside your organization.

What is VPN in Windows Server 2008 R2?

Windows Server 2008 R2 supports four different VPN protocols: Point to Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol over IPsec (L2TP/IPsec), Secure Socket Tunneling Protocol (SSTP), and IKEv2. The factors that will influence the protocol you choose to deploy in your own network environment include client operating system, certificate infrastructure, and how your organization’s firewall is deployed.

How to configure NPS data?

You can configure which NPS accounting data is sent to the computer running SQL Server by selecting options in the SQL Server Logging properties dialog box shown in Figure 9-9. Clicking Configure in this dialog box allows you to specify the properties of the data link to the computer running SQL Server. When configuring the data link properties for the SQL Server connection, you must provide the server name, the method of authentication that will be used with the computer running SQL Server, and the database on the computer running SQL Server that you will use to store the accounting data. Just as it is a good idea to have a separate partition on a computer to store NPS accounting data, it is a good idea to have a separate database that stores NPS accounting data.

Why use IKEv2 over VPN?

The benefit of using IKEv2 over other protocols is that it supports VPN Reconnect. When you connect to a VPN server using the PPTP, L2TP/IPsec, or SSTP protocol and you suffer a network disruption, you can lose your VPN connection and need to restart it. This often involves reentering your authentication credentials.

What is EAP TLS?

Extensible Authentication Protocol-Transport Level Security (EAP-TLS) This is the protocol that you deploy when your VPN clients are able to authenticate using smart cards or digital certificates. EAP-TLS is not supported on stand-alone servers and can be implemented only when the server hosting the RAS role service is a member of an AD DS domain.

What is VPN authentication?

VPN Authentication. A VPN is an extension of a private network that encompasses encapsulated, encrypted, and authenticated links across shared or public networks. A client connects to a public network, such as the Internet, and initiates a VPN connection to a remote server.

How to configure a RADIUS client?

To configure a RADIUS client using NPS, open the Network Policy Server console from the Administrative Tools menu. Right-click RADIUS Clients and then click New RADIUS Client. This will open the dialog box shown in Figure 9-6.

How to connect to a remote system?

You can simply enter the IP of the system that you wish to connect remotely to and hit Connect or configure advanced options for managing your connection. For instance, in the General tab, login credentials can be entered to automatically login to the system that you are connecting to (e.g. Domain admin credentials). To visit Advanced Options, click Options button to expand the interface.

How to remotely connect to a computer?

To make sure that your system can remotely connect, go to Computer (My Computer) Properties from the right-click context menu to enable incoming remote desktop connections. Click on Advanced System Settings and move over to the Remote tab. From here select Allow Connections Running Remote Desktop With Network Level Authentication ...

Table of Contents

Click Start – All programs – Administrative Tools – Group Policy Management.

1- We can use Group Policy setting to (enable or disable) Remote Desktop

Click Start – All programs – Administrative Tools – Group Policy Management.

How to access remote desktop settings?

To access your Remote Desktop settings, click on the Server Manager icon in the lower-left corner of your desktop next to your Start button. On the right side of your Server Manager window, you will see a link to Configure Remote Desktop under Computer Information. Click on this link to view your Remote Desktop settings.

Who has access to remote desktop?

Remote Desktop Users. Administrators have access by default.

Can you restrict remote desktop access to a few users?

Normally, all servers have Remote Desktop enabled for all users. While this works well, you may want to restrict remote desktop access to a few select users. To do this, click on the third option then click on the Select Users… button.

Can you modify user access for remote desktop?

All user access for Remote Desktop can be modified from here in the future. Once you see that the user is added to the list, click OK. Note that as long as Remote Desktop is enabled the Administrator account will always have access. You can then click Apply to apply the settings to the server and OK to exit the configuration.

Question

The machine I am trying to remote desktop FROM is on the same network subnet as the 2008 server machine

Answers

Please check if the user account you use to log on Windows server 2008 is a member of remote desktop users as Tim suggested.