enable remote access server 2008

How do I enable remote access to my server?

Right-click on "Computer" and select "Properties". Select "Remote Settings". Select the radio button for "Allow remote connections to this computer". The default for which users can connect to this computer (in addition to the Remote Access Server) is the computer owner or administrator.

How do I enable remote access permission?

Click Start, point to Administrative Tools, and then click Active Directory Users and Computers. Right-click the user account that you want to allow remote access, and then click Properties. Click the Dial-in tab, click Allow access, and then click OK.

Can I still activate server 2008 R2?

Announced by Microsoft on March 12, on January 14, 2020, Windows 7 and Windows Server 2008/2008 R2 will go out of support, and soon thereafter Office 2010. Out of support means that there will no longer be any development or security patches released for these operating systems.

How do you check RDP is enabled or not?

Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server and to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services.If the value of the fDenyTSConnections key is 0, then RDP is enabled.If the value of the fDenyTSConnections key is 1, then RDP is disabled.

How can I access a server from outside the network?

Use a VPN. If you connect to your local area network by using a virtual private network (VPN), you don't have to open your PC to the public internet. Instead, when you connect to the VPN, your RD client acts like it's part of the same network and be able to access your PC.

What happens if you don't activate Windows Server 2008?

With Windows Server 2008 and Windows Vista, when a system was never activated or the activation process failed, the system entered reduced functionality mode (RFM) and certain function and features of the operating system would cease working.

How do I find my Windows 2008 r2 product key?

Press Windows key + R to launch the Run menu, type in cmd, and hit ENTER. Now search the registry for the software in question and keep hitting 'Find Next' until the serial numbers shows up in the data column. On double-clicking this file, the VB script will reveal your Windows product key.

How do I run Slmgr command?

On a client computer, open a Command Prompt window, type Slmgr. vbs /ato, and then press ENTER. The /ato command causes the operating system to attempt activation by using whichever key has been installed in the operating system. The response should show the license state and detailed Windows version information.

How do I enable remote access in Windows 10?

To enable Remote Desktop on Windows 10 using the Settings app, use these steps:Open Settings on Windows 10.Click on System.Click on Remote Desktop.Turn on the Enable Remote Desktop toggle switch.Click the Confirm button.

Why can't I remote into another computer?

Go to the Start menu and type “Allow Remote Desktop Connections.” Look for an option called “Change settings to allow remote connections to this computer.” Click on the “Show settings” link right next to it. Check the “Allow Remote Assistance Connections to this Computer.” Click Apply and OK.

How do I grant access to a Remote Desktop in Windows 10?

Windows 10: Allow Access to Use Remote DesktopClick the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•

How do I give someone access to my Remote Desktop?

Manually grant RDP access to an Active Directory userLog in to the server.Right-click the Windows® icon and select System.Select the remote settings depending on your Windows version: ... Click on Select Users.Click Add.Type the username you wish to add.Click Check Names. ... After you add the user, click Apply and OK.

How to configure NPS data?

You can configure which NPS accounting data is sent to the computer running SQL Server by selecting options in the SQL Server Logging properties dialog box shown in Figure 9-9. Clicking Configure in this dialog box allows you to specify the properties of the data link to the computer running SQL Server. When configuring the data link properties for the SQL Server connection, you must provide the server name, the method of authentication that will be used with the computer running SQL Server, and the database on the computer running SQL Server that you will use to store the accounting data. Just as it is a good idea to have a separate partition on a computer to store NPS accounting data, it is a good idea to have a separate database that stores NPS accounting data.

Why use IKEv2 over VPN?

The benefit of using IKEv2 over other protocols is that it supports VPN Reconnect. When you connect to a VPN server using the PPTP, L2TP/IPsec, or SSTP protocol and you suffer a network disruption, you can lose your VPN connection and need to restart it. This often involves reentering your authentication credentials.

What is VPN in Windows Server 2008 R2?

Windows Server 2008 R2 supports four different VPN protocols: Point to Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol over IPsec (L2TP/IPsec), Secure Socket Tunneling Protocol (SSTP), and IKEv2. The factors that will influence the protocol you choose to deploy in your own network environment include client operating system, certificate infrastructure, and how your organization’s firewall is deployed.

What is L2TP/IPsec?

L2TP/IPsec is the protocol that you need to deploy if you are supporting remote access clients running Microsoft Windows XP because such clients cannot use SSTP . L2TP/IPsec provides per-packet data origin authentication, data integrity, replay protection, and data confidentiality.

What is EAP TLS?

Extensible Authentication Protocol-Transport Level Security (EAP-TLS) This is the protocol that you deploy when your VPN clients are able to authenticate using smart cards or digital certificates. EAP-TLS is not supported on stand-alone servers and can be implemented only when the server hosting the RAS role service is a member of an AD DS domain.

What is VPN authentication?

VPN Authentication. A VPN is an extension of a private network that encompasses encapsulated, encrypted, and authenticated links across shared or public networks. A client connects to a public network, such as the Internet, and initiates a VPN connection to a remote server.

How to configure a RADIUS client?

To configure a RADIUS client using NPS, open the Network Policy Server console from the Administrative Tools menu. Right-click RADIUS Clients and then click New RADIUS Client. This will open the dialog box shown in Figure 9-6.

What is Server Manager 2008 R2?

Server to server – Server Manager on a full installation of Windows Server 2008 R2 can be used to manage roles and features that are installed on another server that is running Windows Server 2008 R2.

Can you use Server Manager in Windows Server 2008 RTM?

Note: Windows Server 2008 RTM also has remote management capabilities. You can easily manage these servers by using almost any MMC Snap-In. However, the fact that you can use Server Manager to do it is new in R2.

Can you remotely manage a server 2008 R2?

Windows Server 2008 R2, unlike Windows Server 2008 RTM, has a nice feature that allows you to remotely manage it, from another server or from a Windows 7 workstation , by using Server Manager.

What port is Remote Desktop on WS08?

On a WS08 Server Core, run the following command to open TCP port 3389.

What does a 0 mean in a scregedit.wsf script?

The scregedit.wsf script will either return a 1 or a 0. If you see a 1 then the Terminal Services (i.e. Remote Desktop) is disabled, a 0 means it is enabled.

Does WS08 have a GUI?

However, because WS08 does not have a GUI, you need to use the command prompt to accomplish the administrative tasks. You may find it convenient to manage the Server Core from another computer. By default Remote Desktop is not enabled on the Server Core.

Does Windows Server 2008 have a GUI?

Windows Server 2008 (WS08) Server Core doesn't have a GUI. Therefore, when you install the Server Core you need to configure some of the basic parameters to get the server ready for remote administration. For example, you need to configure the IP parameters and open the appropriate ports before you…

Does Exchange 2007 support Exchange Server?

As you may know, Microsoft doesn't support Exchange Management Console for Exchange Server 2007 or the Exchange System Manager for Exchange 2003 on a Windows Vista-based computer as explained in the KB article 931903 "You cannot install the Exchange Management Console or the Exchange System Manager on a Windows Vista-based…

How to connect to a remote system?

You can simply enter the IP of the system that you wish to connect remotely to and hit Connect or configure advanced options for managing your connection. For instance, in the General tab, login credentials can be entered to automatically login to the system that you are connecting to (e.g. Domain admin credentials). To visit Advanced Options, click Options button to expand the interface.

How to remotely connect to a computer?

To make sure that your system can remotely connect, go to Computer (My Computer) Properties from the right-click context menu to enable incoming remote desktop connections. Click on Advanced System Settings and move over to the Remote tab. From here select Allow Connections Running Remote Desktop With Network Level Authentication ...

How to access remote desktop settings?

To access your Remote Desktop settings, click on the Server Manager icon in the lower-left corner of your desktop next to your Start button. On the right side of your Server Manager window, you will see a link to Configure Remote Desktop under Computer Information. Click on this link to view your Remote Desktop settings.

Can you modify user access for remote desktop?

All user access for Remote Desktop can be modified from here in the future. Once you see that the user is added to the list, click OK. Note that as long as Remote Desktop is enabled the Administrator account will always have access. You can then click Apply to apply the settings to the server and OK to exit the configuration.

Can you restrict remote desktop access to a few users?

Normally, all servers have Remote Desktop enabled for all users. While this works well, you may want to restrict remote desktop access to a few select users. To do this, click on the third option then click on the Select Users… button.

Where is the System Properties tab?

System Properties found in Server Manager. It defaults to the Remote tab when accessed from the ‘Configure Remote Desktop’ link on the main page.

Who has access to remote desktop?

Remote Desktop Users. Administrators have access by default.

Table of Contents

Click Start – All programs – Administrative Tools – Group Policy Management.

1- We can use Group Policy setting to (enable or disable) Remote Desktop

Click Start – All programs – Administrative Tools – Group Policy Management.

Question

The machine I am trying to remote desktop FROM is on the same network subnet as the 2008 server machine

Answers

Please check if the user account you use to log on Windows server 2008 is a member of remote desktop users as Tim suggested.