enable routing and remote access server 2012 r2

Setting up Windows Server 2012 R2 routing/NAT functionality

1. To start, from Server Manager click Manage > Add Roles and Features.
2. On the Before You Begin page, click Next.
3. Select Role-based or feature-based installation and click Next.
4. On Server Selection select the server you want to install the feature on and click Next.
5. In the list of Server Roles, select Remote Access and click Next.

Full Answer

How to configure remote routing and remote access in Windows Server 2012?

Routing and Remote Access in Windows Server 2012 - Part 1. In the Server Manager you will find an option for "Add Roles and Feature" on the front page; click on it or you can go to the "Manage" option and then click the "Add Roles and Features", they both will open the same window. Now a new window will be opened named "Add Roles and Features".

How do I enable IIs routing on Windows?

On Role Services click the Routing checkbox. Click Add Features on the pop-up dialogue. Click Next on the Web Server Role (IIS) page. The Feature has now been added to Windows. A reboot is not necessary for this process so we will now proceed to the next part of the configuration. From Administrative Tools look for Routing and Remote Access.

How do I install the remote access role?

You must install the Remote Access role on a server in your organization that will act as the Remote Access server. On the server that will act as the Remote Access server, in the Server Manager console, in the Dashboard, click Add roles and features. Click Next three times to get to the server role selection screen.

How do I enable remote access to my VPN Server?

Once the new window pops up, right click your server name (mine is VPN (local)) then Configure and Enable Routing and Remote Access. We’re trying to keep our surface area as small as possible, so click on Custom Configuration.

How do I enable Remote Access and Routing?

Right-click the server, and then click Configure and Enable Routing and Remote Access to start the Routing and Remote Access Server Setup Wizard. Click Next. Click Remote access (dial-up or VPN) to permit remote computers to dial in or connect to this network through the Internet.

What is Routing and Remote Access server 2012?

Instructions. Windows Server 2012 R2 routing/NAT functionality feature is a part of Remote Access and allows for connecting 2 networks together, allowing a Windows machine with at least 2 NICs on 2 separate networks to handle the routing between them. To install this feature complete the steps below.

How do I enable RDP on server 2012?

Open the System Properties: For Windows Server 2012 to Windows Server 2016: ... In Computer Information, click Configure Remote Desktop:In the System Properties dialog box, under Remote Desktop, click one of the following options: ... Review the information in the Remote Desktop dialog box, and then click OK twice.

What is Windows Routing and Remote Access?

Routing and Remote Access Service (RRAS) is a Microsoft API and server software that makes it possible to create applications to administer the routing and remote access service capabilities of the operating system, to function as a network router. Developers can also use RRAS to implement routing protocols.

What is the use of routing and remote access service?

RRAS is a software router and an open platform for routing and networking. It offers routing services to businesses in local area network (LAN) and wide area network (WAN) environments or over the Internet by using secure VPN connections.

What is the purpose of a remote access server?

A remote access server (RAS) is a type of server that provides a suite of services to remotely connected users over a network or the Internet. It operates as a remote gateway or central server that connects remote users with an organization's internal local area network (LAN).

How do I enable remote access to my server?

Right-click on "Computer" and select "Properties". Select "Remote Settings". Select the radio button for "Allow remote connections to this computer". The default for which users can connect to this computer (in addition to the Remote Access Server) is the computer owner or administrator.

How do I enable RDP on my server?

Steps How to Windows Server Enable Remote Desktop (RDP)Launch the Start menu and open Server Manager. ... Click on the Local Server on the left hand side of the Server Manager window. ... Select the Disabled text. ... Click on Allow remote desktop connections to this Computer on the System Properties window.More items...•

How do I know if Remote Desktop is enabled?

Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server and to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services. If the value of the fDenyTSConnections key is 0, then RDP is enabled. If the value of the fDenyTSConnections key is 1, then RDP is disabled.

How do I restart Routing and Remote Access Service?

To ensure that the service is running, type Get-Service iphlpsvc at a Windows PowerShell prompt. To enable the service, type Start-Service iphlpsvc from an elevated Windows PowerShell prompt. To restart the service, type Restart-Service iphlpsvc from an elevated Windows PowerShell prompt.

How can you install enable and configure Remote Access services on server?

Install the Remote Access roleOn the DirectAccess server, in the Server Manager console, in the Dashboard, click Add roles and features.Click Next three times to get to the server role selection screen.On the Select Server Roles dialog, select Remote Access, and then click Next.Click Next three times.More items...•

What is the difference between RAS and RRAS?

Microsoft Remote Access Server (RAS) is the predecessor to Microsoft Routing and Remote Access Server (RRAS). RRAS is a Microsoft Windows Server feature that allows Microsoft Windows clients to remotely access a Microsoft Windows network.

What is Routing and Remote Access server 2016?

RRAS stands for Routing and Remote Access Service is a feature of Windows Server operating systems family that provides additional support for TCP/IP internetworking. RRAS makes it possible to create applications to administer the routing and remote access service capabilities of the operating system.

What do you know about Routing?

Routing is the process of selecting a path for traffic in a network or between or across multiple networks. Broadly, routing is performed in many types of networks, including circuit-switched networks, such as the public switched telephone network (PSTN), and computer networks, such as the Internet.

What is difference between static and dynamic routing?

Static routes are configured in advance of any network communication. Dynamic routing, on the other hand, requires routers to exchange information with other routers to learn about paths through the network. Static and dynamic routing are used where appropriate, and some networks use both.

How do I setup a RAS server?

To install the Remote Access role on DirectAccess servers Click Next three times. On the Select role services dialog, select DirectAccess and VPN (RAS) and then click Add Features. Select Routing, select Web Application Proxy, click Add Features, and then click Next. Click Next, and then click Install.

What is R2 routing?

Windows Server 2012 R2 routing/NAT functionality feature is a part of Remote Access and allows for connecting 2 networks together, allowing a Windows machine with at least 2 NICs on 2 separate networks to handle the routing between them .#N#To install this feature complete the steps below.

How to add roles and features to a server?

To start, from Server Manager click Manage > Add Roles and Features. On the Before You Begin page, click Next. Select Role-based or feature-based installation and click Next. On Server Selection select the server you want to install the feature on and click Next.

How to install Remote Access Server?

On the server that will act as the Remote Access server, in the Server Manager console, in the Dashboard, click Add roles and features. Click Next three times to get to the server role selection screen. In the Select server roles dialog box, select Remote Access, click Add Features, and then click Next.

What group does DirectAccess belong to?

For a client computer to be provisioned to use DirectAccess, it must belong to the selected security group . After DirectAccess is configured, client computers in the security group are provisioned to receive the DirectAccess Group Policy Objects (GPOs) for remote management.

Where is the Routing and Remote Access menu?

Click Tools in the top right corner of Server Manager, select Routing and Remote Access from the drop-down menu.

What tab to check for remote access?

On the Logging tab, check Log additional Routing and Remote Access information (used for debugging).

How to start VPN debugging?

If you are debugging a VPN or other interface, you might want to now manually start it by right clicking the interface name and selecting Connect from the context menu. To see the list of interfaces, click Network Interfaces on the left of the Routing and Remote Access MMC.

How to launch NPS in RRAS?

Once you’ve returned to the RRAS window, *left-click* Remote Access Logging and Policies. Then right-click and Launch NPS.

How to change VPN to SSTP?

Click the Security Tab -> Change type of VPN to SSTP. By default, it detects the type of VPN automatically, but slightly slows down the process.

What OS is SSTP?

SSTP was introduced in Windows Vista, so the OS must be Vista or Greater ( or Server 2008 and greater). Go to Network and Sharing Center. Click Setup New Connection or Network.

Can you use NAP to access VPN?

Enter your user information. Don’t forget that if you didn’t setup a Group to access the VPN using NAP , you’ll need to enable Dial-In access within Active Directory Users and Computers for that user.

Can you skip the next section of VPN?

If you don’t want to add any additional security (IP restrictions, Group Access to VPN), then you can skip the next section and jump to setting up the client. I find it super interesting, though. I’d give it at least a glance.

Does RRAS work with IIS?

It will force you to install IIS, which is odd, because RRAS can work independently of IIS (you can even stop and disable IIS and RRAS will still work). I would think just the IIS Hostable Web Core would be enough, but whatever. It’s required. Go ahead and accept that it will be installed.