Access the router configuration tool then click Router Settings (on the left). For assistance with accessing the router configuration page, refer to Accessing the Router Configuration. From the Advanced tab, click Remote Management. Ensure the Turn Remote Management On box is checked and adjust as desired then click Apply.
- Turn on your TV and Fios Set-top box.
- Press and hold TV key for 6 seconds. Each device key will light up, then the TV key will remain on.
- Press the Power button on your remote. ...
- Press the Up arrow button once every second until the TV turns off.
- Press OK to store the code in your remote.
How do I access my Verizon FiOS DVR?
Using your Fios remote, press the DVR button, use the arrow keys to navigate To watch Fios TV online, sign into My Verizon and select the DVR tab to:
How do I enable remote recording and on screen Caller displays?
To enable remote recording and on screen caller displays, we need to add a couple of port forwards to enable the traffic from Verizon which arrives at our pfSense WAN interface to make its way via our internal network to our STB. There’s a need for two ports to be forwarded to enable Caller-ID and remote DVR functionality.
How do I prevent my DVR from deleting saved shows?
To prevent your DVR from deleting saved shows using your Fios remote, select: Menu > Recorded TV > choose a program that you want to keep > Save Until. As the DVR reaches recording capacity, existing recordings will be deleted to make space available for new recordings.
How do I remotely access my Hikvision device?
The following guide will guide you through the necessary steps to remotely access your Hikvision device with another PC, Laptop, Tablet, Smartphone or iPhone. Before proceed please connect your device to your router and obtain a computer that is already connected to the same router or LAN. Also make sure that your computer can access the internet.
Does reseting a modem clear port forwarding?
Does a DVR STB need to stay on the same IP address?
About this website
How do I access my FIOS DVR remotely?
Access your DVR anywhere, using the Fios TV Mobile app. If you have Enhanced and Premium TV, you can stream your recorded shows using the app by selecting: DVR > Filter or DVR location....Use your DVR at home and on the gorecord a show.schedule a program.view recorded programs.manage series.
What are the Verizon remote codes?
Once your set-top box and TV are connected, use your Fios remote to program it to your TV. With your TV turned on, press: Menu > Customer Support > Top Support Tools > Program Fios Remote, press OK and follow the prompts on your TV screen....A-C.ManufacturerCodesAnam National023Anitech024Ansonic025AOC02681 more rows
Why is my Verizon remote not working?
Open the battery cover and make sure the batteries are properly seated. Press a few device buttons like AUX, DVD, STB, TV. If the top of your remote flashes briefly, the batteries are working. If the top of the remote does not flash, your batteries need to be replaced.
How do I sync my FIOS remote to the box?
Simply point the Fios TV Voice Remote towards the Fios TV One that you wish to pair it with, press and hold the play/pause and '0' button on the Fios TV Voice Remote until it flashes blue, and it should pair itself automatically. Your Fios TV Voice Remote will now control the interface of your Fios TV Box.
How do I reset my Verizon remote control?
To reset your Fios remote, press and hold the OK and 2 buttons together, and release. Then press 9-0-0 in that sequence. The Red LED will blink three times and then turn off to indicate that settings have been restored.
How do I reset my Verizon cable box remote?
Many Set-top Box equipment problems can be resolved with your Fios TV service using your Fios remote control, press: “D” button “My Dashboard” > TV Support, select option.
Why is my remote control not working?
Clean the remote control terminals. The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control. Replace with fresh batteries.
How do you reset a remote?
For Android TVs released in 2015 or later, symptoms may improve by updating the software of the remote control....Reset the remote control.Open the battery compartment cover and remove the batteries.Press and hold the Power button for three seconds.Insert the batteries again and close the battery compartment cover.
Why is my set-top box not responding to remote?
Press the STB button on the remote, then try Guide, channel up and down, and volume up and down. Make sure there is a clear line of sight between the remote and set-top box. Replace the batteries in the remote, they may be weak. You may need to program the remote for the set-top box again.
How do I setup my Verizon remote control?
Go to Menu > Settings > Voice control > Fios TV Voice Remote > Program Voice Remote > Automatic Setup. Once the automatic setup completes you'll see a “Success” message in the top right of the TV screen, ... Go to Menu > Settings > Voice control > Fios TV Voice Remote > Program Voice Remote > Manual Setup.
What is STB button on remote?
You can program the TV remote to enjoy the functionality of controlling your TV and Set Top Box(STB) simultaneously. To setup. Press and hold the STB button, then press the corresponding code while still holding the STB button.
Where is the STB button on my Fios remote?
There is no button labeled STB on the new remote. There is a power or input button, but that's as close as it gets.
How do I program my Verizon remote to my TV?
Press and hold the Play/Pause and “O” buttons at the same time, Release the buttons when the blue light starts flashing on the Fios TV Voice Remote, When the blue light stops flashing on the Fios TV Voice Remote, your Fios TV Voice Remote is connected, paired and ready for use.
How do I find my TV code?
First, go to Settings on your TV. Then, scroll down until you find the Link with the TV Code menu. Click on it. A blue TV code will appear on the screen.
How do you program a TV remote without a code?
Common method #4: Press and hold the power button and device key simultaneously until the LED blinks or remains lit, then release and repeatedly press the power button until the device turns on or off, then press the device key (sometimes the stop button) to save the setting.
How do you pair a remote to a TV?
For Android TV released in 2015 Using the supplied remote, press the HOME button. Select Settings. Select Bluetooth setting in the Network & Accessories category. Select Device list.
Does reseting a modem clear port forwarding?
Resetting the box (or perhaps more correctly the modem), probably clears the port forwards and if you do it in the right order (All STB's unplugged, router unplugged, router booted, DVR booted, other STB's booted), I bet it sorts itself out and it works for a while. If not, doing a reset on the router instead of just a power cycle in the previous sequence should certainly do it.
Does a DVR STB need to stay on the same IP address?
Now, the DVR STB should stay on the same IP all the time (don't change the IP address -- it needs to stay in the low 100 range since Verizon applies some QOS to the STB's to insure they get priority over internet traffic for streaming content).
How to stop DVR from deleting shows?
To prevent your DVR from deleting saved shows using your Fios remote, select: Menu > Recorded TV > choose a program that you want to keep > Save Until. As the DVR reaches recording capacity, existing recordings will be deleted to make space available for new recordings.
What is a DVR?
Digital Video Recorder (DVR) capabilities allow you to record programs while viewing other content. Learn more about enjoying your Fios DVR service below.
How do I watch programs I’ve recorded?
Note : You can keep your recorded shows on your Fios DVR for as long as you want, but if you’re done with a show, select it from the menu and scroll to Delete.
What happens if I turn off the television in the middle of a recording?
Your DVR bookmarks where you stopped watching a show. When you view the recording again, the program resumes where you left off.
How to watch FiOS on Verizon?
To watch Fios TV online, sign into My Verizon and select the DVR tab to: record a show. schedule a program. view recorded programs. manage series. Access your DVR anywhere, using the Fios TV Mobile app. If you have Enhanced and Premium TV, you can stream your recorded shows using the app by selecting: DVR > Filter or DVR location.
Why won't my DVR record an episode?
There can be several reasons why a series recording didn't record an episode of a program: The series recording is set to record "first-run" episodes only , and the episode to be recorded was a re-run. You've run out of space on your DVR.
Will resetting my Set-top Box erase the selections I have programmed into my remote?
No. Your settings and selections such as device codes, favorite channels, and recent On Demand selections will still be saved and available after you reset your Set-top Box.
How to see DHCP allocation on Verizon?
If you log into pfSense and Navigate to Status > DHCP leases you should observe a DHCP allocation for the Verizon box.
How to verify if Verizon is calling you?
To verify this works, ensure the option is enabled on your STB first , then call your Verizon number. You should see a blue box appear on screen notifying you of the call and name/number calling.
How to connect pfSense to LAN?
Connect the coaxial line from the ONT to the coaxial input of your modem, connect your pfSense configured interface to the LAN port of your modem.
How to reset a router to default settings?
First lets reset the device to its default configuration, press and hold the small red reset button on the back of the router for 10 seconds , you’ll notice eventually the green power LED will start to flash whilst it reconfigures itself and boots up.
Does Verizon modem have ports?
Verizons modem only needs access to a few limited ports which we defined in the Allowed_OUT_ports_FIOS_DMZ alias.
Can I use a VLAN to segregate traffic?
Its possible to simply use an available NIC from the Available network ports though, you’ll just need to substitute my VLAN Interface name for yours.
Can PfSense disable firewall?
As pfSense is now shielding us from WAN attacks, we can disable the firewall feature set too.
How to check IP address availability?
a)You can check the IP address availability by performing the “Ping” command (Fig. 2). In order to do that you need to type ping 192.168.1.4 at the command promptwindow.
Can you enable DHCP in DVR?
a) You can enable the DHCP checkbox in the DVR Network Configuration interface:
Can I remotely access my Hikvision device?
The following guide will guide you through the necessary steps to remotely access your Hikvision device with another PC, Laptop, Tablet, Smartphone or iPhone. Before proceed please connect your device to your router and obtain a computer that is already connected to the same router or LAN. Also make sure that your computer can access the internet. After properly port-forwarding (also called port-mapping) your router you will be able to access your device by using an internet browser, such us IE, Chrome, Firefox or Safari and/or our client software iVMS4200.
Does reseting a modem clear port forwarding?
Resetting the box (or perhaps more correctly the modem), probably clears the port forwards and if you do it in the right order (All STB's unplugged, router unplugged, router booted, DVR booted, other STB's booted), I bet it sorts itself out and it works for a while. If not, doing a reset on the router instead of just a power cycle in the previous sequence should certainly do it.
Does a DVR STB need to stay on the same IP address?
Now, the DVR STB should stay on the same IP all the time (don't change the IP address -- it needs to stay in the low 100 range since Verizon applies some QOS to the STB's to insure they get priority over internet traffic for streaming content).
