Remote-access Guide

enabling plex remote access on verizon router

by Lois Steuber Published 3 years ago Updated 2 years ago
image

Once the console is open, click the Settings link on the left sidebar. Click Remote Access on the left sidebar. Make a note of the port that Plex uses for remote access so that you can use it, along with your static IP address, to setup your router in the next step.

Full Answer

How do I remote access my Plex server?

Remote Access. Enable access to your Plex Media Server from outside your local network so that you can reach it when away from home or for sharing content with family or close, personal friends. You can do this under Settings > Server > Remote Access in Plex Web App.

How to manually open a port on a router using Plex?

Click “Apply”. If you don’t see the manual port option in your settings, you need to click on the “Show Advanced” button in the upper right navigation bar. Once you’ve turned on the option in Plex, it’s time to access your router’s admin page.

Why can't I connect to Plex through a DMZ?

Even if you open a DMZ to a second firewall, that means the connection makes it inside of your network, which is exactly what you don't want to happen. Your firewall appliance should be the first thing that the outside world sees. What you should do is set your router to only allow port 32400 through, and direct it to your Plex server.

image

How do I access Plex without port forwarding?

Click on the “CIDR Address” box, choose a Label name for the Resource, enter the private IP address of Plex (it's listed under Plex Settings > Remote Access and is likely 10. x.x.x or 192.168. x.x ), choose 32400 for the Port Restriction, and click “Add Resource”. Congrats!

How do I connect my Plex to my home network?

Launching the Plex Web App on Network Attached Storage (NAS) Once you know that IP address, on a PC in your home: Open a browser window. Type http://server.local.ip.address:32400/web into the address bar (e.g “http://192.168.1.5:32400/web”) The browser will connect to the Server and load Plex Web App.

How do I enable Plex through VPN?

It's a simple process. Once you've successfully configured your Plex server, go to Settings, click Remote Access, and then hit the Enable Remote Access button. The server will use NAT-PMP or UPnP to automatically configure a connection via your router.

Why is Plex not reachable?

Verify that your Server is listed on your Devices page. Disable any VPN on your computer or router. Disable any proxies being used on your computer or router. Make sure you aren't requiring secure connections on the server while using an app that doesn't support them (see below)

What is remote access Plex?

Enable access to your Plex Media Server from outside your local network so that you can reach it when away from home or for sharing content with family or close, personal friends. You can do this under Settings > Server > Remote Access in Plex Web App.

Is remote access Plex safe?

Plex has teamed up with Let's Encrypt to provide our users with high-quality secure certificates for your media servers, at no cost to you. There's no need to set up VPNs and no need to create and install your own certs. You can safely and securely connect to your media no matter where you are.

Which VPN works with Plex?

ExpressVPN – among the most popular & advanced VPNs With 1500 servers in 94 different countries across the globe, ExpressVPN gives you a wide range of locations to access Plex from, plus bonus features like the speed test tool that helps you find the fastest server so as to access HD content with no lags.

How do I get Plex to work on NordVPN?

To make this possible, you'd need to set up NordVPN on a supported router. Once you have NordVPN running on your router, you can connect the device with your Plex server setup to the router, and any traffic transferred over the connection will be behind a NordVPN server.

Can you bypass VPN?

You can often bypass a VPN block by switching servers or going to a different VPN provider. The organization blocking your access may have focused on only the more popular VPNs when choosing what to block, so you may be able to gain access using a less popular service.

Why can't I access my Plex server remotely?

Open Plex Web App and make sure you're signed in to your Plex account on the server under Settings > Server > General. Go to Settings > Server > Remote Access. If needed, toggle the Show Advanced button to ensure the appropriate options are visible. Enable the Manually specify public port checkbox.

What is the IP address for Plex?

Open a browser window. Type http://localhost:8888/web into the address bar. The browser will connect to the Server as if it were local and load Plex Web App.

Does Plex require UPnP?

Plex Media Server generally works, by the magic of UPnP, right out of the box.

Does Plex server need to be on same network?

Remote streams allowed per user You can set the maximum number of simultaneous streams each user is allowed to have, when not on the same network as the Plex Media Server (the “local” network).

Does Plex work over wifi?

The Plex Media Server generally assumes you will have an active internet connection when using it. While most things will still work fine if you temporarily don't have a connection, some things do require an active connection.

How do I find my local Plex server IP address?

Find out the local IP address of the device on which the app is running. You will typically be able to find this in the device's system settings. In your Plex Web App, go to Settings > Server > Network .

Why can't I access my Plex server remotely?

Open Plex Web App and make sure you're signed in to your Plex account on the server under Settings > Server > General. Go to Settings > Server > Remote Access. If needed, toggle the Show Advanced button to ensure the appropriate options are visible. Enable the Manually specify public port checkbox.

What port do you forward plex media server to?

If you are manually forwarding a port, set that forward up beforehand and make sure you know the external port number which you are forwarding (remember that you need to forward the external port you choose to internal port 32400 for the internal IP address of the device running Plex Media Server)

What to do if remote access is disabled?

If Remote Access is currently disabled, then use the Enable Remote Access button to trigger your server to try to configure a connection. The server will attempt to automatically configure a connection through your router using UPnP or NAT-PMP first.

What happens if you manually forward a port in your router?

Note: If you manually forward a port in your router then you MUST enable this setting or else your server will continue to try and automatically map the port and will almost certainly fail.

How fast can you upload a stream?

For instance, you might decide that you don’t want any individual remote stream to go over 4 Mbps, even if you have a higher total internet upload speed and allow multiple streams.

Does Plex Media Server allow remote access?

The information displayed by default will depend on the current state of the Plex Media Server. Unless disabled, your Plex Media Server will attempt to set up Remote Access for you.

Can you manually specify port forwarding?

If the automatic port configuration for connecting to plex.tv fails (or if you otherwise simply prefer to set up your port forward manually), you can manually specify the port using this setting. Our “Troubleshooting” article (linked below) has more details about how to set up a manual port forward.

Does Plex Media Server require a Plex Pass?

Tip!: This feature requires an active Plex Pass subscription for the Plex Media Server admin Plex account.

What does /24 mean in a plex?

So the /24 just means your subnet mask is 255.255.255.0 its CIDR notion that plex supports. So you have to put 192.168.1.0/24 so plex knows to treat all addresses from 192.168.1.1 to 192.168.1.254 as your private network.

How to set port 32400?

First, in your server settings, check the box for manually setting port to 32400. Then in the G3100 router under firewall settings and port forwarding: Click Advanced. Then select the options in the screenshot.

Can you separate your own network from your landlord?

The only downside to this approach is that you practically separate your own network from that of the landlord. You also have to set up the port forwarding in both routers, or remote access won’t be possible.

How to set up static IP address on Plex?

You’ll need to identify your Plex Media Server computer on the network and then look for an option in your router to create a “static IP”, “static lease”, or “DHCP reservation” to permanently associate the Plex Media Center with a given IP address. Below you can see an example of what adding a static IP address looks like, via our DD-WRT router.

How to check if Plex is disabled?

While logged into your Plex Media Server’s web control panel, select the Settings icon from the upper right toolbar. Within the Settings menu select, the “Server” tab.

How to port forward on Plex?

First, let’s turn on the manual port mode in Plex. To do so navigate to Settings > Server > Remote Access (as we did in the previous section of the tutorial).

What does the control panel indicate on Plex?

In addition to telling you that the server is accessible, the control panel will also indicate the internal IP address and port number of the Plex Media Server on your local network as well as external, or public, IP address and port number.

Can you use Plex Media Server on a TV?

If you primarily use Plex Media Server for watching content on your local network (like streaming your favorite shows to your HDTV or smartphone), you may not have given much though to the benefits of remote access. RELATED: How to Set Up Plex (and Watch Your Movies on Any Device)

Can you watch Plex on your phone?

One of the greatest things about the Plex Media Server platform, however, is the ease with which you can access your media from anywhere. With remote access enabled and properly configured, you can watch your favorite TV shows anywhere you have internet access: on your phone while you’re sitting in a waiting room, on your laptop while you’re vacationing, or even on a smart TV at a friend’s house.

Can you disable remote access on Plex?

During the initial setup of the Plex Media Server, the setup wizard prompts you to enable or disable remote access. While the default state is enabled, you may have opted at the time to disable remote access, or perhaps you inadvertently disabled it while messing around with the system settings later on. Regardless, it’s easy enough to check the status of remote access and enable it if it is currently disabled.

PSA: RAID is not a backup

This ISN'T a recently learned lesson or fuck up per-se, but it's always been an acceptable risk for some of my non-prod stuff. My Plex server is for me only, and about half of the media was just lost due to a RAID array failure that became unrecoverable.

I don't understand why the native Plex apps don't keep a local index of meta data and shows for fast searching and browsing

Third party clients like Infuse and PKC do this and it makes using Plex so much better, especially remotely.

Can we Auto skip intro?

I was wondering if there is a setting to auto skip intro and not have to keep hitting the skip button.

Plex Best Features

I've had Plex for about a year now, and I JUST discovered the shuffle option. My god, this changes everything! I can shuffle episodes of a single TV show, or all of my TV shows. I can even filter my shows (ie - shows from 1990) and shuffle those, and it feels like I'm back in my childhood!

Which iPhone is good for plex?

Apple iPhone (X and Xs): An excellent mobile platform for Plex. Basically every file-type I have tried to stream from Plex streams using direct play. Plex does not have perform any transcoding (file conversions) because the iPhone essentially can play everything. ------.

Why is the risk not the open port itself but the program which is listening on the port?

The risk is not the open port itself but the program which is listening on the port because the program is what enables security holes.

Does Plex use SSL?

Plex uses their own certificate to create an SSL connection to the plex server. This is a good thing so the communication between the client and the server is encrypted and not even your ISP is able to look into your traffic if they want to.

Does Plex take forever to load?

At least for me, for some reason on regular Plex apps such as the Windows 10 app, the iPhone app, or the web app, it always takes forever for search results and library pages to load but actually streaming a show doesn't take much time to load at all .

Is plex secure?

IMO, you are already pretty secure what plex natively provides. You can set the "secure connections" to "required" but then you will not be able to access the server with an IP address in your own network.

How to connect to Plex from outside?

In order to have a direct connection from outside your network to Plex you may need to forward a port in your router. After you forward a port in your router, you will then need to specify the port forward in Plex.

What is the default port for plex?

Make sure the number is correct. The default Plex port is 32400. Click the Apply button.

Where is the wrench on plex?

Next, click on the wrench which you will find on the navigation bar at the top of the screen. This will take you to the Plex settings menu.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9