How does the faleemi IP camera work?
Faleemi allows you giving close family members and friends’ access to your camera, so every close one can share your baby’s special milestones. Faleemi IP Camera takes only a few minutes to install. Literally, just plug it in and set it up with your smart phone.
Does faleemi camera support spaces in Wi-Fi SSID and password?
I bought a different camera that didn’t allow spaces in my home SSID. ie. home network is named 'my house'. A: Faleemi cameras don't support 2 special characters ' (apostrophe) and & in the Wi-Fi SSID and password. Because we use this 2 in our CGI command. The spaces in Wi-Fi SSID will be no problem for our cameras.
How many cameras can I connect to one faleemi app?
On one Faleemi App, you can connect more than 30 Faleemi cameras (all the Faleemi models) and you can view 4 cameras simultaneously on one screen and switch to other cameras easily. You can also connect to one Faleemi camera with several mobile phones or PCs or tablets at the same time.
Can I download faleemi to my iPhone?
As long as your mobile is connected to Internet, through either Wi-Fi or mobile data, you can access the camera. Q: Can i download it to my iPhone and watch my pet remotely? A: Yes, you can use your iPhone to download "Faleemi" APP and use it to view your camera remotely. Q: How much upload speed does this camera need?
How do I connect my Faleemi camera to my phone?
After that, please follow below steps to setup your cameraPower the camera up, you will hear “beep” after 30 seconds. ... Open the Faleemi App, click [More]Click [One Key WiFi]Check the Wi-Fi SSID is correct. ... Phone will sound with “bibibibi”. ... Go back to [Camera] interface, Click [Add Camera]Click [LAN Search]More items...
How do I connect to iSpy?
iSpy can connect to virtually any video source. To add a camera into iSpy click on "Add" and click "Local Camera" to add a USB camera, "IP Camera" to add a network camera, or "VLC Camera Source" to use the VLC plugin. You will be taken to one of the following screens to configure the connection.
How do I connect my Faleemi camera to WiFi?
Set it up, Put it anywhere. Firstly, connect your mobile device to your WiFi and download the App “Faleemi” on the App Store or Google Play store. 3. Enter the password of your wifi router. Wait for around 30 seconds for the WiFi configuration and done.
Can iSpy connect to DVR?
The settings for Dvr cameras are built right into our free surveillance software - the inbuilt wizard will automatically setup your Dvr cameras. Remember to also try connecting via ONVIF as Dvr cameras may support ONVIF connections as well.
What is iSpy used for?
iSpy is the world's most popular open source video surveillance application. It's compatible with the the vast majority of consumer webcams and IP cameras. With more than 2 million users worldwide, iSpy works with more cameras and devices than anything else on the market.
How does the iSpy app work?
The software can also recognize any words typed into a device, and, according to its architects, can identify letters with greater than 90 percent accuracy. When used with a DSLR camera, iSpy can even pick up on reflections of touchscreens in sunglasses or window panes from up to 12 meters away.
Is the Faleemi app free?
3 Step QR code Setup via iPhone or Android Smartphone using Faleemi App (Free to download), Special Smartlink Technology for Quick WiFi Setup. Immediately Stream Video and Bidirectional Audio to Your Smartphone, Tablet, Apple Mac or Windows PC.
How do I change my Faleemi camera password?
To ensure the security of your camera, you are suggested to change the default password. Please follow below steps to do it. Click on the icon [ ] at the right of the camera and select [Advanced Settings] and next [User Setting]. Enter your new password and click on [Done] on the top right.
How do I reset my Faleemi camera?
Please keep pressing the RESET button at least 10 seconds when setting the camera in the state of electricity. Loosen the button when the red light rapid flashing. Then you will hear a “beep” sound and the camera begin restart. Wait for 2 minutes to finish the resetting.
Is iSpy Agent DVR free?
Agent DVR is a free* software DVR solution for windows 10, Mac and Linux.
How do I connect to H 264?
0:004:15H.264 Surveillance DVR Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext plug the camera power cable into the DVR and connect to a power source the DVR will boot up youMoreNext plug the camera power cable into the DVR and connect to a power source the DVR will boot up you should see a live view of your cameras on the screen. Press the menu button on the DVR or remote.
How do I add DVR to home assistant?
5:1013:27Home Assistant CCTV/Analog OnVif with notifications setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipHowever if it does not we can go in and just click on home assistant go to our configuration all theMoreHowever if it does not we can go in and just click on home assistant go to our configuration all the way down to the bottom. Click on integrations right here click on added device right behind my
What is I Spy connect?
iSpyConnect is the web interface for iSpy. Using iSpyConnect you can access and control iSpy on your local network or over the web from anywhere. iSpy secures access through iSpyConnect with authentication tokens to ensure that you and only you can access live and recorded content.
How do you add a Tapo camera to iSpy?
Run the iSpy software on your computer.Click Add on the top left menu and select ONVIF Camera.Enter the Username and Password that you set for your camera on the pop-up window, select Network Address, and click Next. ... Choose the video resolution and click OK.More items...•
How do I use DVR agent?
Agent DVRBrowse to your Home Assistant instance.In the sidebar click on Settings.From the configuration menu select: Devices & Services.In the bottom right, click on the Add Integration button.From the list, search and select “Agent DVR”.Follow the instruction on screen to complete the set up.
How do I uninstall iSpy agent?
Windows: Click Start - Run and enter "services. msc". Find Agent in the list, right click it and click stop. Run agent-uninstall-service.
Cameras
Supports more devices than any other solution including IP cameras, ONVIF devices, local USB cameras and more. No limit on the number of devices you can add. Supports audio devices as well!
Recording
Record to MP4, VP8/9, GPU and Raw. Agent will save the raw stream from your camera when possible to minimise CPU usage.
Sensors
Includes a huge range of motion detectors from basic motion detection to object tracking, trip wires and object recognition. Includes AI integration to minimise false alerts.
Alerts
Send an email, SMS, push notifications to mobile devices, call a URL, desktop alerts, notify an MQTT endpoint and many more. The notification options are endless.
Integrations
Fully integrated with Home Assistant, Amazon Alexa, IFTTT, DeepStack AI and License Plate Recognition via PlateRecognizer.com. Set up triggers and actions from the worlds most popular platforms for the Internet of Things or add your own using our API.
Remote Access
Agent uses custom tech to avoid the usual requirement of opening up ports on your router for remote access. Access from anywhere over SSL with zero router configuration. It even works if Agent is running behind a strict firewall or over a mobile network.
What is HTTP://192.168.1.101?
HTTP://192.168.1.101 represents the IP address of the camera being accessed. Step 1. Find your camera’s IP address. If you don’t know its IP address, click here. Step 2. Open a web browser and type the IP address. Enter your login information. Step 3.
How to find the HTTP port number on a camera?
Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera. The default is 80.
Enhance your purchase
Sorry, your monthly warranty plan was removed because these plans are currently only available for single-item orders.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
On one Faleemi App, you can connect more than 30 Faleemi cameras
On one Faleemi App, you can connect more than 30 Faleemi cameras (all the Faleemi models) and you can view 4 cameras simultaneously on one screen and switch to other cameras easily. You can also connect to one Faleemi camera with several mobile phones or PCs or tablets at the same time.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
How to check what version of IP camera is installed?
To do so, open internet explorer and click on Help>About Internet Explorer. A window will open and you can see the current version running in your computer.
How to connect NVR to PoE switch?
NOTE: If you are using an NVR with PoE Switch build in, then you will need to configure the camera’s IP address to match the PoE IP address range. When ready to connect the camera then you need to add the camera manually utilizing Onvif as the Manufacture and the HTTP port number is 8080. Once that is all set, click add and the video will start streaming over the N VR.
What is sub stream on camera?
The Sub Stream is basically how you will see your cameras over a smart phone or tablet. These settings are usually at a lower frame rate and resolution (D1), without compromising quality on the video recording. Make sure you click on “Set” when changing any of these settings so the changes will stick.
What is the default IP address for a camera?
Like any IP based device it will require to know its IP address, or at least have a way to find it. These cameras come with a default IP of 192.168.1.2 or sometimes will be set to DHCP. The best way to approach this is by downloading and using the TP-IP Series Search Utility.
Can you change camera position on POE?
Many of our customers call us to ask why they cannot change the camera's position when using a built-in POE NVR. The short answer to that is that it is not possible after the...