Position the VSS module on top of the main driver side bulkhead wire harness and secure it to the wire harness with tie-straps. • Ensure the VSS module is positioned so the shock sensor adjustment knob can be accessed for later use. • Ensure the tie-strap is routed through the VSS module loops at opposite corners.
Full Answer
Do I need FordPass Connect to use remote features?
FordPass Connect (optional on select vehicles), the FordPass App; and complimentary Connected Service are required for remote features (see FordPass Terms for details). Connected service and features depend on compatible AT&T network availability.
How do I Turn on remote start on my Ford Explorer?
• Using the Select and Arrow buttons on the steering wheel, select Settings. • Select Vehicle Settings. • Select Vehicle. • Select Remote Start System. • Verify that the remote start system is enabled.
How do I remote start my Toyota Corolla?
To remote start your vehicle, first press the lock button to lock all the doors. Then press the remote start button twice. The exterior lamps will flash twice. The horn will sound if the system fails to start, unless quiet start is on. Quiet start will also run the blower fan at a slower speed to reduce noise.
How do I activate the remote start function on the vehicle?
Activate the remote start using the IDS. • Select the Tool Box icon. • Select Body. • Select Security. • Select Remote Start. • Verify that the information on the IDS screen is correct and all procedures have been followed. • Select Yes. This will enable the remote start function on the vehicle. INSTALLATION (Continued)
How to remote start a car?
To remote start your vehicle, first press the lock button to lock all the doors. Then press the remote start button twice. The exterior lamps will flash twice.
What is the LED on a remote control?
An LED on the remote control provides status feedback for remote start or stop commands.
How long does a second remote start last?
For example, if the vehicle had been running for five minutes from the first remote start, the second remote start will cause the vehicle to continue to run for a total of 15 minutes.
Can you use remote start on a car that is parked indoors?
WARNING: To avoid dangerous concentrations of exhaust fumes, do not use remote start if your vehicle is parked indoors or in an area that is not well ventilated.
Can you recall the seat position on a remote start?
You can use your intelligent access keyfob recall the memory seat position, mirror position, and steering column position (if equipped) upon remote start. The keyfob must first be linked to a pre-set position. See Memory Function.
Can remote start be used in a state?
Many states and provinces have restrictions on the use of remote start. Check your local and state or provincial laws for specific requirements regarding remote start systems.
Can you remotely start a car with automatic climate control?
If your vehicle has automatic climate control, you can configure it to begin operating when you remote start your vehicle. A manual climate control system will run at the setting it was set to when you switched the vehicle off.
How to activate RMU?
84. For RMU activation the following information from the customer is recommended to provide them with electronic notification for app retrieval: 1 Email Address 2 Cell Phone Number 3 Cell Phone Carrier Company 85. Log on to your Professional Technician Society (PTS) account and enter the vehicle information. 1 Select "Vehicle Id". 2 Select "By Year & Model" 3 Choose the year & model of the vehicle and then select "GO". 4 Hover over the "Workshop" tab. 5 Select the "Accessory Installation" menu item. 6 Under the "Electrical" heading, select the "Remote Access Activation" link (first time users will need to agree to terms & conditions). 7 Select the "Install or Diagnose" link. NOTE: If you are not directed to the screen shown below (or user agreement screen for first time users), make sure your internet browser zone settings are set to medium. This setting can be found in your browsers "internet options" under the "privacy" tab.
Where to install OE hood switch?
46. Install the OE hood switch assembly to the existing hood switch mounting location, on the LH side of the upper radiator core support as shown. • If equipped, remove the dummy plug from the upper radiator core support. • Position the flat spot on the hood switch to the flat spot on the radiator core support. • Connect the electrical connector to the hood switch.
Where is the OE hood switch wire harness located?
45. Locate the vehicle's existing "OE" hood switch wire harness, located on the LH side of the vehicle below the radiator core support. • If required remove the vehicle's air cleaner assembly, to access the vehicles "OE" hood switch wire harness. For additional information, refer to WSM, Section 303-12.
