Login to your FRITZ BOX WLAN 7330 router. Navigate to the port forwarding section. Click the Internet link. Click on Permit Access.
Full Answer
How do I set up secure access to my FRITZ Box?
You can set up secure access to your FRITZ!Box over the internet. This way you can access the FRITZ!Box's call list as well as documents and media files in FRITZ!NAS or configure settings in the FRITZ!Box user interface.
How do I get an IPv4/IPv6 address for my FRITZ Box?
For IPv4 internet access, the FRITZ!Box must obtain a public IPv4 address from the internet service provider. For IPv6 internet access, the FRITZ!Box must obtain an IPv6 address from the internet service provider.
How do I remove a user from my FRITZ Box router?
On the left-hand menu, click System, then on Fritz!Box Users. On the users screen you will see a list of any user accounts which have been added to the router. Clicking the red "X" can be used to remove any old or unused accounts. Clicking the small pencil icon allows you to access the user's settings.
How do I log in to myfritz?
Call up myfritz.net in a web browser. In the corresponding fields, enter the email address and MyFRITZ! password you used to register with MyFRITZ!, and click "Log In". Solve the CAPTCHA.
How do I access my fritzbox remotely?
Open an Internet browser and browse to the Fritz!Box web interface, located at: http://192.168.178.1 or http://fritz.box. You will now be taken to the Fritz!Box login screen. Enter the password you have set for the router and click the Log In button. On the left-hand menu, click Internet, then on Permit Access.
Can fritzbox use access point?
Under "Access Point Selection", select the Wi-Fi network of your FRITZ!Box with internet access. If the access point is not displayed: Reduce the distance between the two devices. Click the "Refresh List" button and then select the access point.
How do I connect my Fritz box to my computer?
1:055:46FRITZ! Clip - Connecting the FRITZ!Box in 5 minutes - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe black end of the Y cable remains free insert the DSL cable into the DSL te L socket on the fritzMoreThe black end of the Y cable remains free insert the DSL cable into the DSL te L socket on the fritz box. The other end of the cable goes into the socket.
What is fritzbox IP address?
192.168.178.1In the factory settings, the FRITZ!Box has the IP address 192.168. 178.1. You can change it if your computers, smartphones, and other devices in the home network should be assigned IP addresses from a specific IP network via DHCP.
How do I put my Fritz box in bridge mode?
How do I configure my FRITZ!Box in bridge modeEnable PPPoE Passthrough on your FRITZ!Box. Open your web browser (Internet Explorer, Firefox,…) and go to the web interface of your FRITZ!Box. ... Configure PPP connection on your own device.
How do you make a Fritz box a repeater?
2 Setting up the FRITZ! Repeater as a wireless bridgeFor setup, plug the FRITZ! Repeater into a power outlet near the FRITZ!Box.Wait about 1 minute until the FRITZ! ... Briefly push the WPS button on the FRITZ! ... Within 2 minutes: Push and hold down the Connect button on the FRITZ! ... The FRITZ!
What is Fritz box user interface?
The web interface of the FRITZ!Box plays a central role in managing your Internet access, telephony and local network. It also offers numerous functions such as call lists, voicemail, SmartHome, media server and much more. Basically, you can reach the web interface from any device with an Internet browser.
What is the Fritz box password?
The FRITZ!Box password is located on the bottom of the FRITZ!Box. With the FRITZ!Box password, you can access the user interface on all of the devices connected to the FRITZ!Box. To connect a device via Wi-Fi, you need the Wi-Fi network key that is also on the bottom of the device.
What is the DECT button on fritzbox?
If you use a FRITZ! DECT smart switch to operate radiator controls, the settings are transmitted to the radiator control every 15 minutes or every 60 minutes during vacation switching and the phase when the radiator is turned off. To transmit the settings immediately, just push any button on the radiator control.
How do I change my IP address on my FritzBox?
Changing the FRITZ!Box's IP addressClick "Home Network" in the FRITZ!Box user interface.Click "Home Network Overview" in the "Home Network" menu.Click on the "Network Settings" tab.Click the "IPv4 Addresses" button. ... Enter the desired IP address and subnet mask.Click "OK" to save the settings.
How do I change my Fritz box Wi-Fi password?
2 Changing the password for a FRITZ!Box userClick "System" in the FRITZ!Box user interface.Click "FRITZ!Box Users" in the "System" menu.Click on the "Users" tab.Click the (Edit) button for the user whose password you want to change.Enter the new password in the "Password" field. ... Click "OK" to save the settings.
How do you reset a Fritz box?
Resetting the FritzBox by phoneTelephone connected to the FritzBox and “pick up”.Enter the following code using the keypad: # 991 * 15901590 *You should now hear a signal tone in the phone, which confirms that the FritzBox has received the command.The FritzBox is reset and should react again after a few minutes.
Why is my FritzBox not working?
Check whether you can open the user interface with a different device. If the user interface opens, use the other device to open the user interface. The settings of the first device are incorrect or the device is not working correctly. If the user interface does not open, use the recovery tool to reset the FRITZ!Box.
How do I reset my Fritz box?
Resetting the FritzBox by phoneTelephone connected to the FritzBox and “pick up”.Enter the following code using the keypad: # 991 * 15901590 *You should now hear a signal tone in the phone, which confirms that the FritzBox has received the command.The FritzBox is reset and should react again after a few minutes.
Can I connect DSL cable to laptop?
For those who have Digital Subscriber Line (DSL) Internet access, connecting a laptop computer to the DSL modem is as easy as connecting a desktop computer to the modem. If your laptop has an Ethernet port, you don't need to have any extra equipment.
How do I change my FritzBox WIFI password?
2 Changing the password for a FRITZ!Box userClick "System" in the FRITZ!Box user interface.Click "FRITZ!Box Users" in the "System" menu.Click on the "Users" tab.Click the (Edit) button for the user whose password you want to change.Enter the new password in the "Password" field. ... Click "OK" to save the settings.
About the AVM Fritz!Box 7330
View the manual for the AVM Fritz!Box 7330 here, for free. This manual comes under the category Routers and has been rated by 2 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the AVM Fritz!Box 7330 or do you need help? Ask your question here
Frequently Asked Questions
Below, you will find the most frequently asked questions about the AVM Fritz!Box 7330.
1 Preparations
With dynamic DNS you can always access the FRITZ!Box over the internet at the same domain name, even though the public IP address of the FRITZ!Box changes at regular intervals:
2 Setting up FRITZ!Box users
To access the FRITZ!Box over the internet, you must set up users in the FRITZ!Box and allow them to access the FRITZ!Box from the internet:
About this guide
This guide covers how to further secure a FritzBox router by ensuring the security of the user accounts, and controlling whether external access to the router web interface is allowed.
Controlling Remote Access
Open an Internet browser and browse to the Fritz!Box web interface, located at: http://192.168.178.1 or http://fritz.box
Overview
This article describes the FULL version of the 7330 - for a comparison of all versions see the 7330 Versions article.
Modding
Daily updated index of all FRITZ!Box 7330 firmware modding projects. Last update: 2022-01-28 07:44 GMT. The Freetz-org fork is unmaintained since 2021-05-26. Its last maintainer Er13 recommends using Freetz-ng.
Firmware-Scans
Daily updated scans of the latest firmware for the FRITZ!Box 7330. Last update: 2022-01-29 05:05 GMT. Note that models with multiple Linux instances have multiple scan results per firmware labeled main/scrpn/boot/arm/atom. All dates have been converted to GMT.
Part-Numbers
Daily updated index of FRITZ!Box 7330 part numbers. Last update: 2022-01-29 04:33 GMT. Click an EAN/GTIN or MPN to search the web for it.
Accessories
Power-Supply: Selectors >> PSU-Selector >> FRITZ!Box 7330 - Showing recommended Power-Supply units .
Gallery
If you want to extend the gallery with own work then please get in touch. See also the Photography-Inspiration article.
Versions
The Versions section intends to compare different hardware revisions of a device.
FRITZ Usernames and Passwords
If your username and password do not work then please visit our Default FRITZ BOX Router Passwords page.
Test if Your Ports are Open
Now that you have forwarded ports on the FRITZ WLAN7330 you should test to see if your ports are forwarded correctly.
Dependencies
Daily updated index of all dependencies of this script. Last update: 2022-02-25 07:43 GMT. A * in the Mod column marks info from Supportdata-Probes, which will always stay incomplete. If an Object includes itself then this is a file with the same name but another Path and the dependencies are merged.
Model-Matrix
Daily updated index of the presence, path and size of this script for each model. Last update: 2022-02-25 06:13 GMT.