GE TV/VCR Combos Universal Remote Codes
- AIWA: 0227, 0269
- AKAI: 0254
- BROKSONIC: 0310, 0147, 0250, 0147, 0257
- CURTIS MATHES: 0358
- DAEWOO: 0039, 0252, 0138, 0279
- ABEX 0185.
- ACME 0008 0050.
- ADA 0020.
- ADC 0002 0006.
- ADMIRAL 0020 0226 0001.
- ADVENT 0176 0922.
- ADVENTURA 0174.
- AIKO 0058.
Where can I find codes for a GE Universal Remote?
What are the Steps to Programming Cable TV Set-Top Boxes?
- To find out whether your remote control accepts CL4 or CL3 codes, open the battery compartment. ...
- Select “SAT/CBL” from the “Select a category” drop-down menu, then your cable box’s brand name.
- Make a list of the first five or seven device programming codes you encounter. ...
What are the codes for a GE Universal Remote?
- First of all “Turn The Device On”
- Now press and hold the “Setup” button
- Enter the “9-9-1” (three digit) code
- Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”
How to program a GE Universal remote codes?
How to Program a GE Universal Remote Using the Brand Code Search Method
- Turn the gadget you wish to manage “ON” (TV, VCR, DVD, DVR, satellite receiver, or cable box).
- From the list included with your GE universal remote instructions, look up the “Brand Code.”
- To program a device, use the “DEVICE” button (TV, DVD, etc). ...
- Hold down the “POWER” button. ...
What are the codes for GE remote control?
ge universal remote codes cl3, cl4 and cl5 versions; abex: 0185: acme: 0008 0050: ada: 0020: adc: ...
How do I program my GE remote to my TV?
0:152:23How to Program GE Remote with TV using Auto Code Search MethodYouTubeStart of suggested clipEnd of suggested clipDevice button step one manually turn on your tv. Step two point your remote towards the tv. ThenMoreDevice button step one manually turn on your tv. Step two point your remote towards the tv. Then press and hold the setup. Button until this red light turns. On. Next press the tv. Button.
How do I find my remote code?
Call the manufacture of your remote and ask whether it can tell you the codes you need. If you want the entire codes list, have it sent to you. Make sure to tell the manufacturer the correct model of your remote. The model number is located on the inside of the battery latch.
How do I program a GE Universal Remote 4?
How to Program a GE Universal Remote Control.Enter Setup Mode. Press and hold down the SETUP button on the remote until the red light on the remote turns on. ... Press the device type button. ... Enter the device code. ... Tests the results. ... Repeat this process for your other devices.
How do I program my GE 6 universal remote?
2:149:40Setup and Program GE 6 Device Remote to [ANY Device!] - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right press and release the device button that you want to program to in my case i'll do a tv.MoreAll right press and release the device button that you want to program to in my case i'll do a tv. First the power light should blink and then come back.
How do you program a TV remote without a code?
Common method #4: Press and hold the power button and device key simultaneously until the LED blinks or remains lit, then release and repeatedly press the power button until the device turns on or off, then press the device key (sometimes the stop button) to save the setting.
What is the universal remote code?
4 digit codes for GE Universal remote controls (DVD Players)Brand4 Digit CodePACIFIC0446PHILIPS0398 0408 0423 0755 0979 0981 0980 0456 0458 0969PHILIPS-MAGNAVOX0398 0408 0423 0979 0980PIONEER0403 0404 0976 0977 0968 0909 108422 more rows•Oct 1, 2021
What is the 4 digit code for GE Universal Remote?
Ge remote can control all home theater devices and components. Ge Universal remote allows you to set aside the individula device remotes for one Ge remote....4 digit GE codes for TV sets including LCD, Plasma, and Panel TVs.BrandCodeMEI0014MEMOREX0004 0009 0049 0051 0135 0031 0000 0268 0310 0001226 more rows
How do I use my GE Universal Remote?
0:152:51GE Universal Remote Quick Start Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd hold the setup button until the red indicator light stays on and then release. Then press andMoreAnd hold the setup button until the red indicator light stays on and then release. Then press and release the device button on the remote. Beginning with the first code listed.
How do you reset a GE universal remote control?
Remove a battery from the remote and press a button to discharge the remote entirely. Reinsert the battery – the LED should blink twice. Press the digits 2 and 8 simultaneously within 6 seconds – the LED should blink twice. Enter the code 9 8 1, the LED will blink 4 times.
How do you set up a universal remote control?
0:583:27How to set up a universal remote - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn the TV on and Press TV on the universal remote. Now press and hold the setup button of theMoreTurn the TV on and Press TV on the universal remote. Now press and hold the setup button of the universal remote this will usually make a light flash to show that it's in learning mode.
How do I program my GE Universal Remote 24922?
ge 24922 universal remote codesManually turn on the device (TV, VCR, DVD, etc.) ... Press and hold the CODE SEARCH/SETUP button on the remote until the INDICATOR LIGHT lights, then release.Press and release the button for the device you are programming (TV, VCR, DVD, etc.).More items...
Why is my GE universal remote not working?
Your remote may be using shift mode. Press and release the shift/setup button and then use your arrow buttons while the red light is blinking. If this doesn't work or your remote doesn't have a shift function, try reprogramming your remote with a different device code.
What is the 4 digit code for my Samsung TV?
You will see a red solid light. Release “PROG” button and then press “TV” key one time, do not keep pressed. Enter the TV code for Samsung : 0101, and keep trying with Samsung 4 digit and 5 digit remote code list below. The LED light will go off after the correct code is entered.
How do I find the 4 digit code for my LG TV?
One-For-All 4-Digit Universal Codes for LG TV If you have a One-For-All 4-digit universal remote, use the codes below: 0030. 0056. 0178.
What are the codes for one for all remote?
OneForAll Remote code listADC – 0002 0006.ADMIRAL – 0020 0226 0001.ADVENT – 0176 0922.ADVENTURA – 0174.AIKO – 0058.AIWA – 0195 0196 0227 0269.AMTRON – 0053.AKAI – 0105 0002 0077 0254.More items...
What is the remote code for Roku?
The 4 "Streaming Player" codes that can be entered for the ROKU per the Monster 8-Device universal remote are 1966, 1992, 7009, and 7003. Starting to believe there is a printing error and the codes are for ROKU TV.
Why is my ge universal remote not working?
There are several reasons behind a universal remote not working problem. First, it may have been un-programmed, in this case you need to program it...
How to reset a GE universal remote control?
Hold the "Setup" button and wait for the red light to switch ON. Once it turns on release the setup button and press the "OK" button and release it...
What causes a remote control to stop working?
The most common issues due to which a universal remote stop working are: physical damage, battery issues, pairing issues, or issues with the infrar...
What is the code for a Roku TV?
The code to program GE universal remote to Roku TV is 2891.
How do I find the code for my GE Universal Remote?
All GE universal remotes comes with a user-booklet that include codes + programming instructions. If you have lost your remote's user-manual, you w...
Does GE universal remote work with LG?
YES, GE universal remote works perfectly with LG and many other un-popluar brands like Vizio, Devant, Avera, Insignia TV, and many others. The code...
GE Universal Remote Control FAQs
There are several reasons behind a universal remote not working problem. First, it may have been un-programmed, in this case you need to program it again. Second, someone has activated the “Shift” mode of the remote. You can disable this by pressing and releasing the “Setup” button and then pressing arrow-up key while the red light is blinking.
Final Words
General Electric remotes are the most trusted universal remote controls not only in the United States of America but also all around the world. We have posted a very detailed information about the GE universal remote codes along with a guide on how to use these codes to program a remote.
DVD Players manual setup Instructions
Before you start to set up your DVD player, make sure you have connected all the cables and powered on the devices. It goes without saying but I am going to say it anyway: make sure batteries are working in the remote.
How to set up the Universal Remote Control
Press and release the device button you want to setup. For example if your programming TV then press TV button and release it.
How to set up a GE Universal Remote
Setting up a GE Universal remote control is pretty simple. There are three options on how to program your GE remote and I have the step by step instructions listed below.
Universal Remote Codes for VCR
Sarah Mock is a classically trained Chef and graduate of Johnson & Wales University. A culinary blogger for 13 years Sarah helps the home cook prepare her recipes with professional results.
How to find GE Universal Remote Codes Brand for your device?
You must enter tool-specific GE Universal Remote Codes into the universal remote for each of your audio/video devices. When you program your GE universal remote, you will be able to use it with a variety of devices, such as your Blu-ray player, television, DVD player, VCR, and stereo system.
What to do if you can't find the key code for your remote?
If you can’t find the correct key code for the device at the time, you can program your universal remote to search for it. It’s a manual code that puts the remote in search mode.
How to turn on the red light on a remote?
Press and hold down the setup button until the remote’s red light turns on.
Can you use a device button on a remote?
NOTE: If your device does not have a device button on the remote, you can use any device button on the remote.
Can you program multiple devices with a GE remote?
When you program your GE universal remote with GE Universal Remote Codes, you will be able to control multiple devices with a single GE remote. The GE universal remote is frequently used to program home entertainment devices such as televisions, Blu-ray players, DVD players, VCRs, and stereo systems. To program devices, you’ll need GE universal remote codes.
Does a GE Universal Remote have a code search?
Some GE Universal remotes support Auto-Code Search methods; if you have a newer GE Universal remote, follow these steps. If your remote has a CODE SEARCH button, follow the steps below. The quick code search method eliminates the need to enter remote codes and saves you a significant amount of time.
How to find the code on a GE remote?
Flip your remote, Open battery cover remote batteries, you will see a sticker showing the Mode and code list version. There are three code list versions, one CL3 , second CL4 and third CL5. we have listed complete GE universal remote code list Goto GE remote Codes based on the code list version, saving you lot of hassle navigating and selecting options on multiple pages.
How to make sure GE remote works?
Make sure to hookup and power on all the devices you want to setup. next make sure the batteries are working in the GE universal remotes. Note down the GE universal remote codes from the list provided. Nothing is more frustrating to find out that you have not hooked up or universal remote batteries are bad after spending your evening on programming GE remote.
What is the code for a VCR?
Note: Where the code is listed as [code1 code2], the first is for the TV and the second is for the VCR or DVD. Otherwise one code operates both the TV and the VCR/DVD.
How to turn on red light on a remote?
Press and release the device button on the remote for the type of device you wish to control. The red light will blink once and remain on.
What is a GE Universal Remote?
GE universal remote controls can operate audio and video devices of almost any brand. For each of your audio/video devices, you have to enter a Device specific GE Universal Remote Codes in the universal remote control.
Can you use a GE Universal Remote to control a Blu Ray?
Have you ever had to juggle with multiple remotes to control your TV , Blu-Ray and Home theater, missing remotes and hours wasted searching each remote. Now with GE Universal Remote you can control all your home theater devices, we have a quick and simple auto-code Search method and manual code entry method. Programming universal remote is error prone and takes time so, set aside some time before you begin.
Can you program a GE remote to a TV?
Programming your GE universal remote with GE Universal Remote Codes will allow you to operate multiple devices with one GE remote. Home entertainment devices such as TV, blu-ray, television, DVD player, VCR, stereo systems can be programmed with GE universal remote. you will need ge universal remote codes to program devices, we have listed CL2, CL3, CL4, and CL5 type codes.
How to find the codes on a GE remote?
Turn the remote control, open the battery battery that covers remote batteries, you will see the label that shows the method and the codes list. There are three versions of the codes list, a CL3, the second CL4 and third CL5. We list the full list of the GE Universal Remote Codes List “Go to GE” from the codes list, which saves many problems with the navigation selection and several pages.
What devices can be programmed with a GE remote?
Home devices as TV, Blu-ray, TV, DVD player, VCR, stereo systems that will be programmed with the Universal GE remote.
Can a GE remote control work with a TV?
For all audio/video devices, you have the universal GE remote codes of the device in our list below. Programming your GE universal remote will allow you to use the remote control with different devices, which include Blu-ray, TV, DVD player, video player, stereo systems.
Is Universal Remote Control false?
Universal remote control programs are false and take a while before start-up.
How to enter a code on a Ge remote?
See also this page for general GE remote code entering instructions. Step 1: Press and hold the "SETUP" button until the indicator light turns on, then release. Step 2: Press and release the desired Mode button (TV, DVD, CBL/SAT, etc.). The indicator light will blink, then stays lit. Step 3: Enter the 4 digit code for your device.
How many digits are in a GE remote?
There were multiple 4 digit code versions used in GE remotes over time, from V1 (2006), V2 (2011), V3, V4 (2012), V5, CL3 (2013), CL4 (2016) to the newest CL5 (2019).
How to store VCR codes?
Generally it's best to store VCR codes under the VCR button, cable codes under CBL, and so on. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter any VCR code in step 3 of Direct Code Entry.
What is auto code search?
The Auto Code Search searches automatically through all of the codes stored in your remote. If your device does not respond to any of the codes listed for your device, or your brand does not appear in the code lists, try the following steps:
Can a code be accepted but only allow limited function control?
Sometimes a code will be accepted, but only allow limited function control (e.g. only volume and channel control). In this case, continue programming using the next code number for that brand.
