With the vehicle off, press and hold the Lock and Unlock buttons on the key fob for three seconds. The turn signal lamps will flash two times to indicate Keyless Open is enabled. GENERAL PERSONALIZATION SETTINGS Touch Settings on the infotainment Home screen. Touch Vehicle. Select Remote Lock, Unlock, Start or Power Door Locks.
Full Answer
How do I re-learn my GM remote key?
Press and hold the Vehicle Information button until the display reads "Press V to Relearn Remote Key. " If for some reason the display does not appear, restart your car, and repeat the previous steps. If the display still does not appear, contact your nearest GM car care professional.
Can You program a keyless remote to a GM car?
After 2011, most GM models have already synced transmitters that come with the car when you buy it. Once you determine which category your car fits in, programming a keyless remote becomes a very easy process, only involving a few quick steps.
How do I program the keyless remote to unlock the door?
Simultaneously press and hold the lock button and the unlock button on the keyless remote for fifteen seconds. The doors will lock and unlock as you are holding down both buttons to confirm the programming of that transmitter. Do not wait to do this step.
How do I program a smart key fob to a remote?
REMOVE the smart key fob from the Transmitter Pocket and PRESS the LOCK or UNLOCK button to finalize programming of the remote. REPEAT Steps 4-6 to program any additional smart key transmitters. WHEN all additional smart key transmitters have been programmed, PRESS and HOLD the ENGINE START/STOP button for 12 seconds to EXIT Programming Mode.
How does GM keyless entry work?
Personalizing Keyless Open When you approach the vehicle with the key fob within a three-foot range of the door, pressing the button on the driver's door handle once will unlock the driver's door; pressing it again within five seconds will unlock all doors.
How do I program my GMC keyless entry?
4:366:19How To Program A 2018 - 2021 GMC Terrain Remote Key Fob - YouTubeYouTubeStart of suggested clipEnd of suggested clipSide press the stop stop button one time. Then we need to take the remote. And press the unlock.MoreSide press the stop stop button one time. Then we need to take the remote. And press the unlock. Button. Now this remote should successfully be programmed.
How do I remote start my GMC Sierra key fob?
Once you're in the myGMC app, press on the “Remote Commands/ Key Fob” button. This will bring up the options to remotely turn on your GMC vehicle – as well as lock or unlock it or flash its lights if you can't remember where you parked. To change the remote start settings, you have to be inside your GMC.
How do you program a keyless remote for a 2001 GMC Sierra?
0:221:33How to program a GMC Sierra remote key fob 1999 - 2006 - YouTubeYouTubeStart of suggested clipEnd of suggested clipIncluding on your remotes you've previously had for the vehicle. You'll repeat the previous step forMoreIncluding on your remotes you've previously had for the vehicle. You'll repeat the previous step for each remote holding down the lock and unlock button until the door lock cycle.
How do I reprogram my keyless entry remote?
To program your keyless-entry remote, press and hold the "LOCK" and "UNLOCK" buttons on the key fob simultaneously until the locks cycle once more. This could take up to 30 seconds, so be patient. Once you hear the locks cycle, your key fob should be programmed to your GM.
How do I program my GM key fob keyless entry?
1:093:48How To PROGRAM YOUR NEW GM REMOTE! - YouTubeYouTubeStart of suggested clipEnd of suggested clipYour key fob the next step is to take this key fob and press both the lock. And unlock buttons atMoreYour key fob the next step is to take this key fob and press both the lock. And unlock buttons at the same time until the car locks.
Can I unlock my GMC with an app?
The myGMC Mobile App† enables you to use your smartphone to interact with your vehicle from wherever you are. You can remote start, unlock and lock your vehicle, view your fuel life and tire pressure and more on properly equipped vehicles.
How do I know if my GMC has remote start?
Check the owner's manual. If your vehicle has a remote starter, there will be information about your specific remote starter and how it works in your vehicle's owner's manual. ... Check your vehicle's key fob. The key fob for your car will have a special button if your vehicle has a remote starter. ... Test out the feature.
Is OnStar remote start free?
The service is free for five years and includes the following services: Keyfob services that enable owners to remotely start, lock/unlock doors, as well as activate the horn and lights from the myChevrolet, myBuick, myGMC or myCadillac or OnStar RemoteLink app.
How do you remote start a 2004 GMC Sierra?
Directly after pressing the padlock, press and hold the circular arrow button until the turn signals on your GMC vehicle begin to flash. If you are not in view of your auto, press and hold the circular arrow button for two to four seconds. 4. Your GMC vehicle has now been successfully started remotely.
How do you program a keyless entry for a 2000 Chevy Silverado?
Press and hold both the LOCK and UNLOCK buttons together on the first transmitter to be programmed. After about 15 seconds, the vehicle will respond by locking and unlocking the doors. Release the buttons on the transmitter.
How do I program my 2010 GMC Sierra key?
0:241:43How to program a GMC Sierra remote key fob 2007 - 2010 - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn is as far as you can turn the ignition forward without actually starting the vehicle. Now usingMoreOn is as far as you can turn the ignition forward without actually starting the vehicle. Now using the driver information button we're gonna press it until we see press to relearn remote. Key.
How do you program a key fob for a 2018 GMC Sierra?
0:263:06How to add or program extra keys to a 2018 GMC Sierra - YouTubeYouTubeStart of suggested clipEnd of suggested clipKey what check it out. Start it up.MoreKey what check it out. Start it up.
How do you program a key fob for a 2019 GMC Sierra?
1:094:35How To Program A GMC Sierra Smart Key Remote Fob 2019 - 2021YouTubeStart of suggested clipEnd of suggested clipWe're gonna take our cut key put it in the door lock cylinder. And we're gonna be turning to theMoreWe're gonna take our cut key put it in the door lock cylinder. And we're gonna be turning to the left. Five times and after that fifth time we're gonna see a message on the dash.
How do you program a 2016 GMC Sierra key fob?
2:045:13How to program a GM remote / FOB on 2016 Chevy Silverado / GMC ...YouTubeStart of suggested clipEnd of suggested clipSystem the procedural add key fobs to the first open slot available near the module a maximum ofMoreSystem the procedural add key fobs to the first open slot available near the module a maximum of eight fobs may be programmed.
MONEY BACK GUARANTEE
We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.
FAST & FREE SHIPPING
ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!
CUSTOMER SUPPORT
Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.
What is connected vehicle service?
Connected vehicle services vary by vehicle model and require active service plan, working electrical system, cell reception and GPS signal. OnStar links to emergency services. See onstar.com for details and limitations.
Can you ride together on a GMC?
Passengers can now ride together and stream separately with the new available WarnerMedia RIDE † (29) app and a compatible device connected to a vehicle’s Wi-Fi ® Hotspot † (38). With this new streaming service and an unlimited in-vehicle data plan, friends or family can access more than 1,000 hours of live and on-demand movies and TV shows from the comfort of a GMC vehicle.
Can you take Alexa on the road?
Now you can take Amazon Alexa functionality with you out on the road with Alexa Built-In † (39). Learn more about this new in-vehicle app, which is available on select
Does Onstar work on 2018 GM?
U.S. only. Available on properly equipped 2018MY and newer GM vehicles. Requires select service plan. Functionality is subject to user terms and limitations and varies by vehicle model. See onstar.com for details and limitations.
Does the OnStar app access plan include emergency services?
App Access Plan does not include emergency or security services. App streaming requires properly equipped vehicle and services vary with conditions and location. Maps+: U.S. only. Available on properly equipped 2018MY and newer GM vehicles. Functionality is subject to user terms and limitations and varies by vehicle model. See onstar.com for details and limitations.
Does Onstar have diagnostic capabilities?
Diagnostic capabilities vary by model and plan. Message and data rates may apply. Requires contact method on file and enrollment to receive alerts. Not all issues will deliver alerts. See onstar.com for details and limitations.
Does GMC have connected services?
GMC now offers multiple ways to seamlessly link your digital life to your connected vehicle. Compare each Connected Services plan and choose the one that’s right for you.
What is a TechSmart 4 button remote?
TechSmart Series 4- Button 1-Way Keyless Entry Remote Transmitter by Standard®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of...
What is a complete key fob?
Complete key fob assembly replaces units damaged from water intrusion, terminal corrosion, circuit board failure, or case damage Easily programmable-simply use the relearn instructions from the OE service manual or owner’s manual.
How to get a keyless remote to work?
1. Get inside of your vehicle. It is necessary for you to be near both the inside locks and the ignition. Make sure you are sitting comfortably in your seat, and that the keyless remote is close enough to the steering wheel and locks.
How to program a 2007 GM remote?
To program a GM keyless remote from before 2007, sit inside the vehicle while holding the key, and close all of the vehicle doors. Insert the ignition key into the ignition lock cylinder, but do not turn on the ignition.
How to get out of keyless entry transmitter mode?
Turn the ignition switch to the ON (one more click forward) position in order to exit the keyless entry transmitter mode. If you forget to do this step, it is likely that your car will not unlock/lock properly.
How long does it take to unlock a keyless door?
Simultaneously press and hold the lock button and the unlock button on the keyless remote for fifteen seconds . The doors will lock and unlock as you are holding down both buttons to confirm the programming of that transmitter. Do not wait to do this step. You want to do this within ten to twenty seconds after you have shifted the ignition ON/OFF.
How to turn off the ignition on a car?
While holding the door lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF, ON, OFF. Only turn the key as far as it will go before the ignition actually starts the engine. You do not want to start your car. Every time you turn the key to the ON position, a light on the dashboard should appear, and then go away when you turn the key to the OFF position. Do this step quickly.
How to make sure your transmitter is working?
Tug on each of the handles from inside to make sure they are all closed tight. Make sure that your transmitter is close to the steering wheel and lock buttons. ...
How to start a car with a key?
Start your car. Put your key in the ignition and turn it all the way clockwise until you hear the engine come on. Make sure that the gear shift is set to park.
Remote Programming Steps
Before beginning this process, be sure that you have all of the GM remote transmitters you’ll be using with you. This ensures that every remote transmitter is programmed correctly.
Want to Know More? Talk to the Experts
If you need help programming your GMC remote or you need anything at all concerning your new Sierra 1500 in Raleigh, the experts at Thompson Buick GMC Cadillac are ready to assist you. Give us a call or visit us in person at 2600 Wake Forest Road. We can’t wait to meet you.