SEAGATE GoFlex Home, access issues is commonly caused by incorrectly configured system settings or irregular entries in the Windows registry. This error can be fixed with special software that repairs the registry and tunes up system settings to restore stability
Full Answer
Will my GoFlex home device still work on my Network?
All other GoFlex Home features should continue to work on your local network. The data on the device should not be deleted or altered in any way. Only the remote access feature will be discontinued.
How do I use Seagate FreeAgent GoFlex home detect with Windows 10?
Seagate FreeAgent GoFlex Home Detect Windows 10 To get the FreeAgent GoFlex Home NAS to work under Windows 10, try the following: In Control Panel, Network and Sharing Center, Change Advanced Sharing Settings, check Turn on Network Discovery and Turn on File and Printer Sharing (not sure if the latter is necessary).
How do I back up my GoFlex data?
In File Explorer right click on This PC, Map Network Drive. The name of the share is \GOFLEX_HOME\GoFlex Home Backup . Put in the credentials (user and password) from when you first set up the GoFlex.
How do I reset the GoFlex home to factory settings?
Login with your Username and Password. To connect via Finder or File Explorer see the article below. Do not use the Factory Reset Button on the side of the device’s base to reset the device. Note: After resetting the GoFlex Home the Setup Wizard will attempt to re-activate the GoFlex Home and would prompt for a new GoFlex Home Name and Password.
How do I access my GoFlex home without software?
Note: If you would like to activate GoFlex Home without installing the included software, open a browser and enter http://goflex_home or http://
How do I reset my Seagate GoFlex home?
Power the drive off using the power button on the side of the drive. Wait for the drive to be complete powered off, then wait about 30 seconds. Power the drive back on. Once the WiFi LED is on and solid, the drive should be reset and ready to go.
How do I setup my Seagate GoFlex home?
0:056:04Installing the Seagate GoFlex Home - YouTubeYouTubeStart of suggested clipEnd of suggested clipNetwork and allows you to continuously backup up to three computers Mac and PC on a continuous mintMoreNetwork and allows you to continuously backup up to three computers Mac and PC on a continuous mint basis through your wireless network and it also has a USB plug where you can connect a USB printer.
How do I connect my GoFlex home to Windows 10?
To get the FreeAgent GoFlex Home NAS to work under Windows 10, try the following: In Control Panel, Network and Sharing Center, Change Advanced Sharing Settings, check Turn on Network Discovery and Turn on File and Printer Sharing (not sure if the latter is necessary).
How do I access my GoFlex drive?
Double-click the GoFlex icon on the desktop (it may take a minute for the icon to appear). Double-click the Mac Install....Connecting to a Windows computer:Connect the drive to the computer.Open (My) Computer to access the GoFlex drive.Drag files to the GoFlex drive (see Document ID: 206419 for more information).
How do I bypass a Seagate password?
Reset your Seagate Access account password with the Personal Cloud web appGo to PersonalCloud.seagate.com.Click the Forgot password link.Enter the email address associated with your remote access account.An email will be sent to your email account. ... Enter your new password and click Reset.More items...
How do I connect my Seagate GoFlex?
1:345:08GoFlex Satellite - Getting Started - YouTubeYouTubeStart of suggested clipEnd of suggested clipBegin by removing the protective cover from your go flex satellite connect the included USB adapterMoreBegin by removing the protective cover from your go flex satellite connect the included USB adapter to the device. Now plug the go flex satellite into an available USB port.
How do I connect my GoFlex home directly to my computer?
Directly connect your device to the back of your computer using an ethernet cable....GoFlexHome:Open the Seagate Dashboard software.Click on Preferences.This will open a webpage. ... Scroll down to Server Preferences.Click on LAN Connection.More items...
How do I access my Seagate hard drive?
Double-click to open (My) Computer/This PC. Look for the Seagate External drive in (My) Computer/This PC. It will be a drive letter, like E: or F: (unless you have changed it). Double-click on the external drive.
Does Seagate work with Windows 10?
Seagate has evaluated current product lines to determine which ones will be supported in Windows 10. Older drives that are not listed here may work, but have not been tested....Will my Seagate drive work with Windows 10?ProductHardwareAdditional InformationSeagate Desktop DriveYesNo Seagate software included. Use File History to back up to this drive.17 more rows
How do I find my Seagate IP address?
Please follow this procedure to find the IP address of your Seagate Central in Windows:Press the Windows key + R.In the Run window, type: cmd.Press Enter.In the command prompt window, type: ping seagate-XXXXXX. (XXXXXX is the last six digits of the MAC on the Seagate Central label)Press Enter.
Why is my Seagate Dashboard not working?
Seagate dashboard installer not working is very likely cause Seagate Dashboard incompatible with Windows 10. If the current installer is not the latest, you may encounter the Seagate Dashboard installer not working issue. Therefore, to solve this issue, you should download the latest installer from Seagate Dashboard.
How do I reset my Seagate Wireless Plus WIFI password?
Hold the paper clip down for 10 seconds then let go. Power the drive off afterwards. Wait about 30 seconds, then power the drive back on. Doing this pinhole reset will reset the SSID name and password you may have set up.
How do I factory reset my Seagate One Touch?
Reset the drive to factory settings On the Main Menu, click on the device. Click on the More icon ( ) and then click Reset. A notification appears informing you that you will erase all the data on the drive and remove your security settings. Click Reset.
What is the default password for Seagate Wireless Plus?
To get to the router login page it's necessary that you are connected to the router. The default network name (SSID) is Seagate Wireless Plus ....If above login credentials doesn't work with your Seagate Wireless Plus router then try this method.#UsernamePassword1adminadmin2rootstxadmin3stxadmin
How do I reset my Seagate Backup Plus?
Reset using the buttonPower down the Seagate Central by unplugging it from power.Wait approximately 15 seconds.Power up the Seagate Central again.Wait for the device to fully boot and show a steady, non-blinking green light. This takes about three to four minutes. ... Wait until the light becomes solidly illuminated.
Why does Goflex Home stop responding?
If your GoFlex Home web interface stops responding a short time after you reboot then it is very likely that your device has been hacked. I have written about this in other posts, but a search for this specific problem might not get you a direct answer, so I added this post.
Can I open ports 80 443?
Don’t even think about opening up ports 80, 443 unless you apply the IP whitelist tip in my i ptables post or you’re just asking to be hacked again. The safest option is not to open those ports at all.
Can you access Goflex through Seagate?
Shutting down seagateshare just means that you can’t access your own GoFlex Home remotely through seagateshare, but as long as port 80 is open hackers can still access your device.
What port does Goflex use?
set your router to forward requests on port 80 or port 443 to your GoFlex Home's LAN IP address. You will also need to set your router to reserve an IP address for the GoFlex Home so it doesn't change (or you can set GoFlex Home preferences to use a static LAN IP address).
When will Seagate stop remote server?
Nhựt Anh Lê alerted me that Seagate announced they will stop the remote server from February 1st 2019 ( changed to December 31st 2018 ... Windows File Sharing isn't working in Windows 10.
What is the biggest security risk with remote access?
The biggest security risk with remote access is username and password. If you have a user user1with a password = password1 or something similar then you're just asking for trouble.
Can you get remote access to Goflex?
If you liked Seagateshare remote access to your GoFlex Home web server, now that Seagate has shut it down you can still get remote access with a name by setting up a third party proxy service.
Can you force Goflex Home to use higher encryption?
You can force GoFlex Home to use higher encryption by following my instructions in my post "FTPS stopped working" ...
Can you reset a Seagate phone?
As usual, Seagate isn't much help and their only advice is "Do not use the Factory Reset Button on the side of the device’s base to reset the device."
Does Seagate shutdown affect remote access?
I am a bit unclear on what you are saying. Seagateshare shutdown only affects remote access. In Seagate's words "All other features will continue to work as expected while on the same network as your device."
How to get FreeAgent Goflex Home NAS to work?
To get the FreeAgent GoFlex Home NAS to work under Windows 10, try the following: In Control Panel, Network and Sharing Center, Change Advanced Sharing Settings, check Turn on Network Discovery and
Does Seagate Desktop work on Windows 10?
Seagate Desktop will not work under Windows 10 (will not detect NAS), or at least I couldn't get it to work, but Memeo Instant Backup will work on its own. Download the software from the next following link. During install prompts, select Memeo Instant Backup, not the premium version.
10 years Seagate Barracuda still going strong
I want to share some info about a time when Seagate was reliable . I've bought this external HDD between 2012-2014, I don't remember the year. It is Seagate Expansion Portable 2TB. I've used it mainly for backups of my general files. After about 4-5 years of usage I've left it to "sleep" on a shelf in my room.
Will a Ps4 Seagate external work on Xbox One?
Was told it would work on my Xbox one but it doesn't I can't even find it registering as connected to the system. Does anyone know if it can work for Xbox one and if so what I need to do?
SAS Backwards Compatibility
Just a quick one, I have some Seagate Exos X10 12Gb/s SAS drives. I just wanted to confirm that these are these backwards compatible with 6Gb/s controllers etc.?
Backup To OneDrive Software? Everything! Best Software?
I contacted Microsoft and they said they do not have software to where you could backup all your files to one drive. I mean you can copy some of your files to your one drive folder and back stuff up. However, it does not do this automatically.