Remote-access Guide

goflex home remote access only

by Prof. Reese Hessel III Published 2 years ago Updated 2 years ago
image

The GoFlex Home comes with a vendor-assisted remote access via the Seagateshare Web site. At this site, a user can sign in by entering the NAS server's unique name, username, and password, and access data stored on the server as well as access the server's Web interface, similar to how it is done via the local network.

GoFlex Home Remote Access will be shut off December 31st, 2018. All other GoFlex Home features should continue to work on your local network. The data on the device should not be deleted or altered in any way. Only the remote access feature will be discontinued.

Full Answer

How do I connect GoFlex home to my router?

Connect the GoFlex Home drive dock to the Wi-Fi router by using the provided Ethernet cable. 2. Pop the GoFlex hard drive into the GoFlex drive dock and plug the power supply into the drive dock and the wall outlet. Switch on the GoFlex Home by pressing the Power button on the drive dock.

When will GoFlex home remote access be shut off?

This article is for informational purposes only and no longer being updated by Seagate. GoFlex Home Remote Access will be shut off December 31st, 2018. All other GoFlex Home features should continue to work on your local network. The data on the device should not be deleted or altered in any way. Only the remote access feature will be discontinued.

Is the GoFlex home network storage system a good NAS server?

The GoFlex Home Network Storage System is a good performing, simple NAS server that is compatible with Seagate's GoFlex Desk external hard drives. It supports Macs and PCs and works as a print server. The GoFlex Home doesn't support GoFlex Desk drives larger than 2TB.

What is the GoFlex Home app?

Then download the free GoFlex Home app to experience movies, video, and photos while you're on the go. It's perfect for those who need more space than a portable hard drive allows but still want access to all their data.

image

How do I access my GoFlex home without software?

Note: If you would like to activate GoFlex Home without installing the included software, open a browser and enter http://goflex_home or http:// in the Address field to start the setup process. Make sure the GoFlex Home is connected to your network before proceeding.

How do I reset my Seagate GoFlex home?

Power the drive off using the power button on the side of the drive. Wait for the drive to be complete powered off, then wait about 30 seconds. Power the drive back on. Once the WiFi LED is on and solid, the drive should be reset and ready to go.

How can I recover data from Seagate GoFlex?

Recover data from Seagate GoFlex external hard drive on WindowsStep 2: Connect the external GoFlex hard disk, Launch the tool on the main screen click on Recover Partitions, and select your drive. ... Step 3: After completion of the scanning process, the tool will display recovered data in File Type View and Data View.More items...•

How do I setup my Seagate GoFlex home?

0:056:04Installing the Seagate GoFlex Home - YouTubeYouTubeStart of suggested clipEnd of suggested clipNetwork and allows you to continuously backup up to three computers Mac and PC on a continuous mintMoreNetwork and allows you to continuously backup up to three computers Mac and PC on a continuous mint basis through your wireless network and it also has a USB plug where you can connect a USB printer.

How do I bypass a Seagate password?

Reset your Seagate Access account password with the Personal Cloud web appGo to PersonalCloud.seagate.com.Click the Forgot password link.Enter the email address associated with your remote access account.An email will be sent to your email account. ... Enter your new password and click Reset.More items...

How do I access my GoFlex drive?

Double-click the GoFlex icon on the desktop (it may take a minute for the icon to appear). Double-click the Mac Install....Connecting to a Windows computer:Connect the drive to the computer.Open (My) Computer to access the GoFlex drive.Drag files to the GoFlex drive (see Document ID: 206419 for more information).

How do I connect my Seagate external hard drive to Windows 10?

In Windows-based computer, there is no need to do anything special or additional to make the drive work. Simply plug in the power, plug in the USB cable, and the drive should appear in (My) Computer/This PC and Windows Explorer/File Explorer.

How do I connect my GoFlex home directly to my computer?

Directly connect your device to the back of your computer using an ethernet cable....GoFlexHome:Open the Seagate Dashboard software.Click on Preferences.This will open a webpage. ... Scroll down to Server Preferences.Click on LAN Connection.More items...

How do I connect my Seagate GoFlex?

1:345:08GoFlex Satellite - Getting Started - YouTubeYouTubeStart of suggested clipEnd of suggested clipBegin by removing the protective cover from your go flex satellite connect the included USB adapterMoreBegin by removing the protective cover from your go flex satellite connect the included USB adapter to the device. Now plug the go flex satellite into an available USB port.

How do I find my Seagate IP address?

Please follow this procedure to find the IP address of your Seagate Central in Windows:Press the Windows key + R.In the Run window, type: cmd.Press Enter.In the command prompt window, type: ping seagate-XXXXXX. (XXXXXX is the last six digits of the MAC on the Seagate Central label)Press Enter.

How do I reset my Seagate Wireless Plus WIFI password?

Hold the paper clip down for 10 seconds then let go. Power the drive off afterwards. Wait about 30 seconds, then power the drive back on. Doing this pinhole reset will reset the SSID name and password you may have set up.

How do I factory reset my Seagate One Touch?

Reset the drive to factory settings On the Main Menu, click on the device. Click on the More icon ( ) and then click Reset. A notification appears informing you that you will erase all the data on the drive and remove your security settings. Click Reset.

What is the default password for Seagate Wireless Plus?

To get to the router login page it's necessary that you are connected to the router. The default network name (SSID) is Seagate Wireless Plus ....If above login credentials doesn't work with your Seagate Wireless Plus router then try this method.#UsernamePassword1adminadmin2rootstxadmin3stxadmin

How do I reset my Seagate Backup Plus?

Reset using the buttonPower down the Seagate Central by unplugging it from power.Wait approximately 15 seconds.Power up the Seagate Central again.Wait for the device to fully boot and show a steady, non-blinking green light. This takes about three to four minutes. ... Wait until the light becomes solidly illuminated.

Important information

It needs additional 1 or 2 days for processing the order. We Only Provide Shipping to the 48 Contiguous United States. and we don't ship to PO Box, APO/FPO and Military Addresses

Product description

The GoFlex Home network storage system connects to your WiFi router, allowing you to wirelessly store andaccess files and back up multiple computers in the home.

Customer reviews

There was a problem filtering reviews right now. Please try again later.

What is a Goflex home?

GoFlex Home is a consumer network attached storage (NAS) hard drive for the home. Easy to set up and use, it allows the access, sharing, streaming, and backup of files and media for computers, network TVs, media players and game consoles connected to the home wireless network. The Seagate GoFlex Home comprises a drive dock and a hard drive.

How to install Goflex on a computer?

2. Pop the GoFlex hard drive into the GoFlex drive dock and plug the power supply into the drive dock and the wall outlet. Switch on the GoFlex Home by pressing the Power button on the drive dock. 3. Pop the CD (or download from Seagate’s website) into the computer (can be a Mac or Windows PC) to install the software needed to access the hard drive .

How many cables does Goflex come with?

The GoFlex Home comes with two cables and an software installation CD. The following steps were all that was needed to get the personal storage cloud going:

What are the folders in Goflex?

For each user account set up on the GoFlex Home, three folders are created – a Public, Personal, and Backup folder. The Public folder holds files that can be stored and accessed by everyone on your home network. The Personal and Backup folders can only be accessed by the the user.

How many people can access Goflex?

Install the software on other computers that require access to the shared drive. Up to 5 people/ computers on the home network can access the GoFlex Home. By paying to subscribe to the Seagate Share Pro, you get access for an unlimited number of people/computers to the GoFlex Home. There are three ways to access the drive.

Can you use Seagate Share on a computer?

You can add computers and user accounts, backup, access and share files as well. The other way is to use a browser-based Seagate Share either for a computer in the home network or out in the Internet. Both are easy to use with a simple interface, using drag-and-drop or standard dialog boxes we’re familar with.

Can you connect a Goflex to a USB hub?

You can connect an additional external hard drive to expand the capacity of the original GoFlex hard drive. You can also connect a USB hub for connecting more than one USB device.

Setting Up

Being the typical male that I am, I completely ignored the quick-start guide. On the back of the docking station you’ll see an ethernet port, a USB port, a hole for the power connector and a power button. I plugged the drive container into the docking station, attached power and ethernet then powered on the device.

In Use

This is where my gripe with Seagate begins. Honestly, though, it’s also where it ends so take it with that understanding.

Sharing is Caring

Don’t be confused by the box — All of these claims of “wirelessly access files and back up multiple computers”? That just means that you can access the drive from your wireless device, as long as you’re connected to the same network. It’s nothing crazy and special like you might believe given the hype that is portrayed on the packaging.

Expanding Horizons

You’ll remember that I said, early in the review, that the dock had a USB port. Now, you might think that this would offer a one-touch backup solution, but it sadly doesn’t. What it can do, however, is expand your storage on the GoFlex Home. If you have an external USB drive sitting around, you can plug it in and use the extra space to your liking.

Final Thoughts

Seagate’s GoFlex Home 2 TB version is a handy device to have around, to be sure. Backing up is easy, once you’re through the pains of setup. The sharing is great, but I’m miffed by the idea that I have to purchase the Pro license or have to pay to use more than 3 computers with it.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9