When will GoFlex home remote access be shut off?
This article is for informational purposes only and no longer being updated by Seagate. GoFlex Home Remote Access will be shut off December 31st, 2018. All other GoFlex Home features should continue to work on your local network. The data on the device should not be deleted or altered in any way. Only the remote access feature will be discontinued.
How do I reset the GoFlex home to factory settings?
Login with your Username and Password. To connect via Finder or File Explorer see the article below. Do not use the Factory Reset Button on the side of the device’s base to reset the device. Note: After resetting the GoFlex Home the Setup Wizard will attempt to re-activate the GoFlex Home and would prompt for a new GoFlex Home Name and Password.
How do I use Seagate FreeAgent GoFlex home detect with Windows 10?
Seagate FreeAgent GoFlex Home Detect Windows 10 To get the FreeAgent GoFlex Home NAS to work under Windows 10, try the following: In Control Panel, Network and Sharing Center, Change Advanced Sharing Settings, check Turn on Network Discovery and Turn on File and Printer Sharing (not sure if the latter is necessary).
How do I back up my GoFlex data?
In File Explorer right click on This PC, Map Network Drive. The name of the share is \GOFLEX_HOME\GoFlex Home Backup . Put in the credentials (user and password) from when you first set up the GoFlex.
How do I reset my Seagate GoFlex home?
Power the drive off using the power button on the side of the drive. Wait for the drive to be complete powered off, then wait about 30 seconds. Power the drive back on. Once the WiFi LED is on and solid, the drive should be reset and ready to go.
How do I access my GoFlex home without software?
Note: If you would like to activate GoFlex Home without installing the included software, open a browser and enter http://goflex_home or http://
How do I access my Seagate GoFlex external hard drive?
Double-click the GoFlex icon on the desktop (it may take a minute for the icon to appear)....Connecting to a Windows computer:Connect the drive to the computer.Open (My) Computer to access the GoFlex drive.Drag files to the GoFlex drive (see Document ID: 206419 for more information).
How do I connect my Seagate freeagent GoFlex home?
0:056:04Installing the Seagate GoFlex Home - YouTubeYouTubeStart of suggested clipEnd of suggested clipHey this is Andrew Bennett from been sparked calm and today I want to talk to you about the SeagateMoreHey this is Andrew Bennett from been sparked calm and today I want to talk to you about the Seagate Go flex home what this is it's a one terabyte. Hard drive that connects to your wireless. Network
How do I connect my GoFlex home directly to my computer?
Directly connect your device to the back of your computer using an ethernet cable....GoFlexHome:Open the Seagate Dashboard software.Click on Preferences.This will open a webpage. ... Scroll down to Server Preferences.Click on LAN Connection.More items...
Why is my Seagate Dashboard not working?
Seagate dashboard installer not working is very likely cause Seagate Dashboard incompatible with Windows 10. If the current installer is not the latest, you may encounter the Seagate Dashboard installer not working issue. Therefore, to solve this issue, you should download the latest installer from Seagate Dashboard.
How do I fix my Seagate external hard drive not recognized?
Basic hardware troubleshooting steps:Try connecting the drive to a different port on the computer.If possible, try using a different cable.Try using the drive on a different computer.Verify the drive light is on. ... Try a different power outlet.More items...
How do I access my Seagate hard drive?
Double-click to open (My) Computer/This PC. Look for the Seagate External drive in (My) Computer/This PC. It will be a drive letter, like E: or F: (unless you have changed it). Double-click on the external drive.
How do I use my GoFlex external hard drive?
0:011:15Seagate FreeAgent GoFlex Storage System Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith this standard USB 2.0 drive all you have to do is remove the USB 2.0 cable grab. The cable youMoreWith this standard USB 2.0 drive all you have to do is remove the USB 2.0 cable grab. The cable you want in this case USB 3.0 plug it in and now this Drive is USB 3.0.
How do I connect my Seagate GoFlex?
1:345:08GoFlex Satellite - Getting Started - YouTubeYouTubeStart of suggested clipEnd of suggested clipBegin by removing the protective cover from your go flex satellite connect the included USB adapterMoreBegin by removing the protective cover from your go flex satellite connect the included USB adapter to the device. Now plug the go flex satellite into an available USB port.
How do I connect my GoFlex home to Windows 10?
To get the FreeAgent GoFlex Home NAS to work under Windows 10, try the following: In Control Panel, Network and Sharing Center, Change Advanced Sharing Settings, check Turn on Network Discovery and Turn on File and Printer Sharing (not sure if the latter is necessary).
How do I find my Seagate IP address?
Please follow this procedure to find the IP address of your Seagate Central in Windows:Press the Windows key + R.In the Run window, type: cmd.Press Enter.In the command prompt window, type: ping seagate-XXXXXX. (XXXXXX is the last six digits of the MAC on the Seagate Central label)Press Enter.
How do I find my Seagate IP address?
Please follow this procedure to find the IP address of your Seagate Central in Windows:Press the Windows key + R.In the Run window, type: cmd.Press Enter.In the command prompt window, type: ping seagate-XXXXXX. (XXXXXX is the last six digits of the MAC on the Seagate Central label)Press Enter.
How do I connect my Seagate GoFlex?
1:345:08GoFlex Satellite - Getting Started - YouTubeYouTubeStart of suggested clipEnd of suggested clipBegin by removing the protective cover from your go flex satellite connect the included USB adapterMoreBegin by removing the protective cover from your go flex satellite connect the included USB adapter to the device. Now plug the go flex satellite into an available USB port.
How do I connect my GoFlex to Windows 10?
How to connect to the GoFlex Satellite™ from a Windows PCRemove the back plate protecting the USM plug.Attach the GoFlex USB 3.0 adapter to the GoFlex Satellite.Make sure the drive is powered off . Plug the USB cable into the computer. ... Once the drive shows up on the computer you can copy and paste data to it.
How do I connect my GoFlex home to Windows 10?
To get the FreeAgent GoFlex Home NAS to work under Windows 10, try the following: In Control Panel, Network and Sharing Center, Change Advanced Sharing Settings, check Turn on Network Discovery and Turn on File and Printer Sharing (not sure if the latter is necessary).
When is Seagate shutting down?
Please also expect future reminders as we get closer to the shut off date, of December 31st, 2018. If you have any questions or comments regarding this email, please contact Seagate customer service at https://support2.seagate.com.
Does Goflex Home have remote access?
Therefore, we are providing you with notice that effective December 31st, 2018, we will no longer support the remote access feature on GoFlex Home. This feature allows users to remotely access files while not on the same network as your GoFlex Home device. All other features will continue to work as expected while on the same network as your device.
How to get FreeAgent Goflex Home NAS to work?
To get the FreeAgent GoFlex Home NAS to work under Windows 10, try the following: In Control Panel, Network and Sharing Center, Change Advanced Sharing Settings, check Turn on Network Discovery and
How to turn on network discovery?
In Control Panel, Network and Sharing Center, Change Advanced Sharing Settings , check Turn on Network Discovery and Turn on File and Printer Sharing (not sure if the latter is necessary).
Why is my Goflex not working?
The GoFlex Net network adapter will not function properly if you have a firewall set up that blocks the transmission of UDP packets or if UDP is turned off in your router configuration
What does it mean when your Goflex is amber?
A solid amber light means there is an issue with the connection to your network and that the GoFlex Net network adapter is not communicating with the Pogoplug service.
Does Seagate 1TB require authentication?
THe 1TB Seagate asks for authentication, despite the credentials already saved. It should just open right away as the other 3 drives do. When I enter my PW, I get refused.
Does Goflex have DHCP?
DHCP is usually enabled on home networks. If it is not, you will have trouble connecting to the GoFlex Net. If you need assistance enabling DHCP on your router, see your router documentation. You may have a firewall installed that blocks UDP, or UDP is disabled on your router.
