cnM secure H 264 cannot remote view over internet
- Assign your DVR a static IP Address on your network. ...
- Change the settings on your Internet Router to allow incoming Internet connections to your DVR. ...
- Enter a Title by which the connection will be known.
- Enter the static Internet IP Address of your router, or your DyDNS web address in the Address box.
Full Answer
Can I access my H264 DVR from my mobile phone?
Therefore there must be a distributor that can support you with software for remote DVR remote viewing. Do you have a branded or non-brand DVR? To access your H264 DVR from your mobile phone, you first need to know if it has a brand.
How do I connect my DVR to another DVR?
The Android software is able to connect to multiple DVRs at the same time. If your DVR menu matches this one, then this software will most likely work for you to permit remote connection to your DVR. We have also included walk-through videos to help you setup the remote access on compatible DVRs.
How to remotely view TV on a DVR?
If your DVR has a well-known brand, just use the App provided by the manufacturer or dealer to have remote viewing via mobile, otherwise it is necessary to use a generic App, just like the one I will talk about.
What is Meye app for H264 DVRs?
App for non-branded H264 DVRs So, if you have a non-branded generic DVR you can use this App that usually works with most of the devices manufactured in China that carries the name: "H.264 Digital Video Recorder" on the DVR's front panel. There are different Apps and for this purpose, one of them is the Meye developed by the company Meye Tech.
How do I setup my DVR for remote viewing?
How to Remote Access a DVRCreate and Configure a Dynamic DNS Account.Set Up a Dynamic DNS on the Router.Connect the MPEG-4 DVR and Locate the DVRs IP Address.Setting up a Virtual Service on the Router.Install the Remote Viewer Software for Remote Internet Access.
How do I setup my H 264 DVR?
0:004:15H.264 Surveillance DVR Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext plug the camera power cable into the DVR and connect to a power source the DVR will boot up youMoreNext plug the camera power cable into the DVR and connect to a power source the DVR will boot up you should see a live view of your cameras on the screen. Press the menu button on the DVR or remote.
How can I access my DVR from my computer?
How to Connect Dvr to ComputerStep 1 . Connect a network cable Dvr network port port to computer RJ45 port. ... Look for network setting in DVR/NVR. Generally, you got two options here. ... In Windows 7, go to control panel and go to network and sharing centre. Here you will get an option 'change adopter setting'.
How do I connect my H 264 DVR to my iPhone?
0:042:06View Security Cameras on iPhone - DVR-88xxRT - H.264 Standalone ...YouTubeStart of suggested clipEnd of suggested clipClick on that to get to the device list and then click on add for the name you can call it anythingMoreClick on that to get to the device list and then click on add for the name you can call it anything you. Want. Then for the address enter in the IP address. That you got from the DVRs.
What is the default password for H 264 DVR?
Most likely the default username will be admin and password: empty, 12345, or 123456.
How do I connect my DVR to my phone?
0:316:00How to connect to a DVR using an Android Phone - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first information you have to get is the internal IP of your DVR. The TCP port of the DVR. AndMoreThe first information you have to get is the internal IP of your DVR. The TCP port of the DVR. And the username and password to. Start we're going to click this icon right here on the top left corner.
Why can't I see my CCTV remotely?
What to Do If You Cannot Remotely View Security Cameras Using the Internet via Port Forwarding. Make sure your cameras are connected to the network. Ensure all the ports of the network configuration are mapped to the Internet. Open the firewall in the router to allow Internet access to the camera.
How do I find the IP address of my DVR?
0:002:10How to check the IP address of your NVR or DVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical passwordMoreSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical password log in. And go to network then go to tcpip. Under network and tcp it'll give you an ip address.
Can I access my directv DVR remotely?
From your mobile device Stream live or recorded shows while at home or on-the-go with the DIRECTV App. Sign in with your directv.com (or myAT&T, if applicable) user ID and password to watch live TV, access more than 65,000 shows and movies on demand, and access your DVR playlist.
What is App of h264 DVR?
The MEye is an application for DVR remote monitoring. It runs on Android and IOS devices and is very easy to install and setup.
How do I view my security cameras on my iPhone?
0:296:33Security Camera System iPhone App View - YouTubeYouTubeStart of suggested clipEnd of suggested clipBy tapping on the film reel icon on the bottom of the screen I switch the app from the live videoMoreBy tapping on the film reel icon on the bottom of the screen I switch the app from the live video view to recorded video playback mode.
How do I connect my DVR to WiFi?
0:473:10How to Connect a CCTV DVR to a Wireless Router - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe DVR is hardwired to my wireless bridge using a cat5e cable. I am using an AP 3500 for my Wi-FiMoreThe DVR is hardwired to my wireless bridge using a cat5e cable. I am using an AP 3500 for my Wi-Fi bridge which is a multi-purpose wireless.
Why does my CCTV says no signal?
A CCTV test monitor is extremely helpful when troubleshooting camera video issues. One of the most common problems when a camera is not displaying video is a bad cable or BNC connection. Using a test monitor, you can temporarily eliminate the power and video cable that your camera is using.
How do I reset my DVR to factory settings?
To factory reset the device, unplug the DVR from power. Once power is removed from the unit, press and hold the factory reset switch for 4 - 5 seconds, continue holding the reset switch and plug the DVR's power supply back into the unit, you will hear a beep.
What is the default password of DVR?
The default passwords for your DVR or NVR are the same as the username.
How do I connect my CCTV to the Internet?
Connect Your CCTV Device to the Internet (DVR or NVR)Step 1: Securing Your Device and Establishing Internet Connection. ... Step 2: Indirect Connection (Mobile APP) ... Step 3: Indirect Connection - PC Browser. ... Step 4: Direct Connection - Setup. ... Step 5: Direct Connection - Mobile APP. ... Step 6: Direct Connection - PC Browser.
What is DVR type 2?
DVR Type 2 (our model DVR-700x): If your DVR menu is similar to this one, then this software will most likely work for you to permit remote viewing of your DVR. There are also walkthrough videos for this style of DVR, to help you get your DVR setup quickly and online in a flash.
What is DVRPlayer?
DVRPlayer - Software for Mac that allows connection to a single DVR at a time. Phone software - Also included are download links for iPhone and Android software for connection to these same DVRs. The Android software is able to connect to multiple DVRs at the same time.
Does a DVR come with software?
Remote Access software and videos for your DVR. So you purchased a generic Standalone DVR, but didn't come with software? There are many standalone DVRs on the market, coming from just a few major manufacturers (generally in China). Often when you purchase a DVR, it may not come with the software and instructions needed to help you get ...
Works with Analog CCTV and HD Security Cameras
Hybrid iDVR-PROs work with the following security camera types and resolutions.
Request a Demo
If you do not currently have an iDVR-PRO and would like to log in to the demo unit at our office, please request a demo login below. You will be able to login from iPhone, iPad, and Android mobile devices. You can also login from Macintosh and Windows computers. Please click here to request a demo login .
Complete CCTV Systems
Did you know? CCTV Camera Pros can provide a complete surveillance system quote that includes any iDVR-PRO model with cameras, cables, connectors, power supplies, and monitors? We can even mix and match SD and HD security cameras because the latest iDVR-PROs are hybrid. They work with CCTV, AHD, and HD-TVI type cameras.
How to access H264 DVR?
To access the H264 DVR directly on your mobile phone, go to the playstore and install the App. See the images below. Make sure you are your are downloading the correct version of the Meye app, because in Playstore there are other similar apps. Download the App that is developed by Meyetech.
What is a H.264 DVR?
Some DVRs have the following names in the front part: Network H.264 DVR. H.264 Digital Video Recorder. Digital H.264 Recoder. H.264 DVR. There are other variations of the name, but none of them represents the brand but rather the type of compression (CODEC) that it uses. They are non-branded DVRs manufactured in China and passed to ...
Why is my DVR not connecting to the internet?
If the application stays for a long time showing the message "connecting" something is wrong with the Internet link, it may be slow or maybe some firewall is blocking the DVR from the Internet or internal network.
Where is the Alartec logo on a DVR?
We will use the Alartec brand as a DVR brand example, when you purchase an equipment from that company you can see the logo somewhere, usually on the frontal part of the DVR and also on the configuration menu.
Is the installation of a symlink fast?
The installation is simple and very fast, but bring the adds with it.
Is H.264 a brand?
I do not know exactly what might be written on the front part of your DVR, but I can assure you that H.264 is not a brand!
Do you have a branded or non-brand DVR?
To access your H264 DVR from your mobile phone, you first need to know if it has a brand. If it's a branded model probably it will have an operation manual and a technical support number, which is very good.
