What are the benefits of remote haven?
One of the biggest benefits of coming to work in Remote Haven is that you’ll have access to the most incredible working community. You’ll be able to extend your network exponentially.
What type of battery does the Haven connect Lock use?
The HAVEN Connect lock uses an internal rechargeable 3.7V, 5000mAh LiPo battery as the main power source. The battery is good for 350+ charge cycles. A typical full charge should last between up to 12 months with normal daily use.
Can I access Haven logs from my iPhone?
If you enable the “Tor Onion Service” feature in Haven (requires installation of “Orbot” app as well) you can remotely access all Haven log data from your iPhone using the Onion Browser app. So, no, iPhone users we didn’t forget about you and we hope you will pick up an inexpensive Android burner today!
Can I use my Android phone as a haven device?
You can purchase an inexpensive Android phone for less than $100 and use it as your “Haven Device”; leaving it behind whilst you keep your iPhone on you. If you run Signal on your iPhone you can configure Haven on Android to send encrypted notifications, with photos and audio, directly to you.
How do I use the haven app?
How to use the app? By default the app has a 30 second timer so you can make sure that the phone is in a stable place, and then click on the START NOW button. When the timer runs out, the app will start monitoring for any noise, light, movement or vibration to trigger the alarm.
What is haven app?
Haven is an open source app that will run on any Android phone, particularly inexpensive and older devices. It operates like a surveillance system, using the device's camera, audio recording capability and even accelerometer to detect movement and notify a user.
How do I turn my old phone into a security camera?
Step 1: Install a security camera app on your old phone. To begin, you will need to choose a security camera app for your phone. ... Step 2: Choose a spot for your phone security camera. After you have the stream up and running, you will need to set up and position the camera. ... Step 3: Mount and power your new security camera.
Is the haven app free?
Haven is a free and open-source security application for Android designed to monitor activity occurring in the vicinity of a device using its built-in sensors, and to alert the device owner of such activity.
Which smartphone does Edward Snowden use?
GrapheneOSEdward Snowden recommends GrapheneOS, an Android-based smartphone operating system.
Can someone watch you through your phone?
Regardless of whether you use an iPhone or an Android smartphone, it is possible for someone to install spyware onto your phone that secretly tracks and reports on your activity. It's even possible for someone to monitor your cell phone's activity without ever even touching it.
Can hackers see you through your phone camera?
Are hackers really spying on people through their phone cameras and webcams? The short answer: Yes. Webcams and phone cameras can be hacked, giving bad actors complete control over how they function. As a result, hackers can use a device's camera to both spy on individuals and search for personal information.
How can I access my camera remotely?
How to view your IP camera remotely via a web browserFind your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.After you change the port, you will need to reboot the camera in order to save the changes.More items...•
How can I use my old phone as a home security camera for free?
First, download AlfredCamera The app to use is the free and excellent AlfredCamera Home Security, which is available for both iOS and Android. Download it on your regular everyday phone, which you'll use as the viewer phone, and your old phone, which you'll use as the camera.
Can I use my phone as a spy camera?
Turning Old Phones into Security Cameras You don't need expensive surveillance or spy cameras in order to monitor someone at your house or office – you can easily use your Android device. Home security apps can turn your old device into a spy camera in a couple of minutes.
How do I connect my phone camera to another phone?
Step 2: Connect additional phonesOn another phone, open the Google Clips app. ... Tap Start Setup to start pairing your camera to your Android phone.Tap Accept to agree to the Google Terms of Service.Searching for Google Clips: Press the shutter button on your camera to make sure the camera is ready to connect.More items...
What is the best app for security cameras?
The best home security apps for AndroidAtHome Camera.AlfredCamera Home Security.IP Webcam.TinyCam Monitor.WardenCam.Bonus: Hardware security camera apps.
What is a Haven app?
It is an Android application that leverages on-device sensors to provide monitoring and protection of physical areas. Haven turns any Android phone into a motion, sound, vibration and light detector, ...
Can you remotely access Tor Onion?
All event logs and captured media can be remotely accessed through a Tor Onion Service . Haven must be configured as an Onion Service and requires the device to also have Orbot: Tor for Android installed and running.
Does Haven record sound?
Haven only records when triggered by sound and motion and stores everything locally on the device. You can position the device’s camera to capture visible motion or place your phone somewhere discreet to listen for noises. Receive secure notifications of intrusion events instantly or access logs remotely later.
Can I use Haven on my iPhone?
While we hope to support a version of Haven that runs directly on iOS devices in the future, iPhone users can still benefit from Haven today. You can purchase an inexpensive Android phone for less than $100 and use it as your “Haven Device”; leaving it behind whilst you keep your iPhone on you.
Does Haven use Signal?
Signal: if configured, can send end-to-end encryption notifications via Signal. Note that it is not necessary to install the Signal app on the device that runs Haven. Doing so may invalidate the app’s previous Signal registration and safety numbers. Haven uses normal APIs to communicate via Signal.
What is Haven Hub?
HAVEN Hub allows you to lock & unlock your door from anywhere rather than being limited to Bluetooth range. With the hub, you can get attack detection alerts if there is a suspected break-in, receive notifications about your door’s activity, and connect to Amazon Alexa.
Can you have multiple keys on a Haven key fob?
The Haven Key Fob can only control one HAVEN Connect. Think of a car key fob, you can have multiple fobs to start one car, but you can’t start multiple cars with only one key fob. This is an added security feature. You can also control it via Amazon Alexa.
HAVEN Mech
Manual lock activated by your foot that engages with the bottom of your door for strong, reliable security.
HAVEN Connect
Connects to common devices like Ring, Alexa, Vera…etc. so that home safety fits easily into your normal life routine.
Careers at Haven
Do you want to work for Haven Health? Click through to a list of our open jobs and instructions on how to apply… Read More
Volunteering at Haven
End-of-life care from Haven aims to provide compassionate and skilled care to terminally ill patients and their families. To help us successfully achieve this goal, the support of our volunteers is key… Read More
Spiritual Care
At Haven Health, we believe that health care at home involves the whole person – body, mind and soul. For this reason, we offer Spiritual support to patients, their loved ones… Read More
Bereavement
Grieving is a personal and highly individual experience that takes time with healing coming gradually… Read More
Employee Benefits
End-of-life care from Haven aims to provide compassionate and skilled care to terminally ill patients and their families. To help us successfully achieve this goal, the support of our volunteers is key. Volunteers support patients and families in many ways.
Announcement and Public Beta
- We are announcing Haven today, as an open-source project, along with a public beta release of the app. We are looking for contributors who understand that physical security is as important as digital, and who have an understanding and compassion for the kind of threats faced by the users and communities we want to support. We also think it is cool, cutting-edge and making use of e…
Project Team
- Haven was developed through a collaboration between Freedom of the Press Foundation and Guardian Project. Prototype funding was generously provided by FPF, and donations to support continuing work can be contributed through their site: https://freedom.press/donate-support-haven-open-source-project/
Safety Through Sensors
- Haven only records when triggered by sound and motion and stores everything locally on the device. You can position the device’s camera to capture visible motion or place your phone somewhere discreet to listen for noises. Receive secure notifications of intrusion events instantly or access logs remotely later. The following sensors are monitored f...
Building
- The application can be built using Android Studio and Gradle. It relies on a number of third-party dependencies, all of which are free, open-source, and listed at the end of this document.
Install
- You can currently get the Haven BETA release in one of three ways: 1. Download Haven from Google Play 2. First, install F-Droidthe open-source app store, and second, add our Haven Nightly “Bleeding Edge” repository by scanning the QR Code below: or add this repository manually in F-Droid’s Settings->Repositories: https://guardianproject.github.io/haven-nightly/fdroid/repo/ 1. Gra…
Why No iPhone Support?
- While we hope to support a version of Haven that runs directly on iOS devices in the future, iPhone users can still benefit from Haven today. You can purchase an inexpensive Android phone for less than $100 and use it as your “Haven Device”; leaving it behind whilst you keep your iPhone on you. If you run Signal on your iPhone you can configure Haven on Android to send encrypted notificat…
Usage
- Haven is meant to provide a smooth onboarding experience that walks users through configuring the sensors on their device to best detect intrusions into their environment. The current implementation has some of this implemented, but we are looking to improve this user experience dramatically.
Attributions
- This project contains source code or library dependencies from the following projects: 1. SecureIt project available at: https://github.com/mziccard/secureit Copyright (c) 2014 Marco Ziccardi (Modified BSD) 2. libsignal-service-java from Open Whisper Systems: https://github.com/WhisperSystems/libsignal-service-java (GPLv3) 3. Guardian Project fork of si…