hdhomerun dvr remote access

by Prof. Jazmyne Gaylord V Published 3 years ago Updated 2 years ago

How to configure DVR?

What You Need

Router’s Gateway IP address: open the command prompt on your PC and type “ipconfig”
IP address of the DVR: check under the network menu or system information. ...
Router login information (note, not the WiFi password): refer to your internet provider if necessary
DVR Port number: listed under network menu alongside IP address

How to setup a free DDNS host for a DVR?

How to set the DDNS account for NVR

Server name: any name, e.g. www.noip.com
Port: 80
UserName: uniforesecurity (your DDNS account name)
Password & confirm pwd: your DDNS account password
Domain: your free domain, e.g. uniforesecurity.ddns.net

Does HDHomeRun need an internet connection?

Does HDHomeRun need an internet connection? Best answer: Yes. For the initial set up, internet will be required. However, for barebones usage internet is not always needed. Doubletime: HDHomeRun Connect Duo ($70 at Amazon)

How to setup DVR on Dish Network?

Connect a temporary cable to a peaking meter. ...
Peak the dish for the strongest possible signal on the 119°W satellite signal using the azimuth and elevation settings you wrote on page 3. ...
With the peaking meter still connected, tighten the mast clamp and elevation bolts using the torque values listed in Table 1 on page 6. ...

More items...

Can I watch HDHomeRun away from home?

The device and the hdhomerun app must be connected to the same network. HDHomeRun can be accessed remotely by using a service such as Plex, which provides access. As an alternative, you could set up a VPN server at your home and use that to connect remotely to your network.

How do I use HDHomeRun DVR?

0:021:16HDHomeRun DVR - Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipClick the DVR tab you will see that you now have an active DVR account check they use this TV forMoreClick the DVR tab you will see that you now have an active DVR account check they use this TV for making recording stocks in this case we will be storing our recordings in a DVR folder on our C Drive.

Where does HDHomeRun DVR store recordings?

By default, the DVR will record to the public Recorded TV folder on the C drive. If you have another location you would prefer to record to, click the … button and select that location.

How do I find my HDHomeRun IP address?

First, look up the IP address of your HDHomeRun tuner by visiting http://my.hdhomerun.com and copy the URL of your HDHomeRun. Next, find the channel number of the channel that is having playback issues.

Do you need a subscription to use a DVR?

OTA DVRs without subscriptions Tablo has a better menu with a subscription, but can record TV programming without one. OTA DVRs made by AirTV operate without a subscription as well. These DVRs have apps that support Smart TVs and major streaming devices including Roku, Fire TV Sticks, Apple TV and Android TV/Google TV.

Can you record on HDHomeRun?

HDHomeRun now offers a way to record those broadcasts directly through its existing apps. All you need is a media server—be it a PC, NAS box, or Nvidia Shield TV—and a $35-per-year subscription to the HDHomeRun DVR service.

Does HDHomeRun work with IPTV?

3.9 HDHomerun PLUS can be setup as a IPTV device without drivers and with native transcoding.

What format does HDHomeRun record in?

HDHomeRun Extend (HDTC-2US) has the same features as HDHomeRun CONNECT, plus adds the ability to convert the incoming video into H. 264 format, making it more suitable for streaming over wireless connections and to portable devices like phones and tablets.

How do I use Plex as a DVR?

Once your gear is all assembled, here's how to put the whole package together:Set up your DVR tuner. ... Download and run the Plex Media Server (computer or Shield TV) ... Open the Server menu (computer or Shield TV) ... Connect your DVR tuner. ... Scan for channels. ... Confirm your channels. ... Let Plex compile a recording schedule.More items...•

How do I connect to HDHomeRun?

How to set up the HDHomeRun on your Windows PCAttach the coax cable from your antenna to the input on the rear of the HDHomeRun.Connect the Ethernet cable to your HDHomeRun and an output on your router.Hook up the power cable and watch the lights come on to make sure everything is OK so far.

Can I connect HDHomeRun directly to PC?

The HDHomeRun can be connected directly to a PC via an Ethernet cable. The HDHomeRun is auto-MDX so does not need a cross-over cable. Software: This feature requires HDHomeRun software release 20070829 or later. Network configuration: Configure the PC to use a static IP address in the 169.254.

Can't connect to HDHomeRun?

Unplug the power cord from the HDHomeRun, count to ten, and plug it back in. On the CableCARD tab, run a channel scan. Open a support ticket. Make sure to include the 8 digit device ID for your HDHomeRun so our support personnel can review your diagnostic data.

How do I set up HDHomeRun connect?

How do I restart HDHomeRun?

Unplug the power cord from the HDHomeRun, count to ten, and plug it back in. After the HDHomeRun finishes initializing, remove the CableCARD. On the Tuners tab in HDHomeRun Setup, set one tuner to Digital Cable.

How do I connect Synology to HDHomeRun?

Install to NAS using a Windows PCIn a web browser, log-in to your Synology NAS. Open the Control Panel. ... Fill out the name as HDHomeRun. and select the drive you want to use on your NAS, if you have more than one drive volume available. ... Click through the next three windows. No additional changes are needed.

How do I update HDHomeRun firmware?

If you have more than one HDHomeRun device use xxxxxxxx. local where xxxxxxxx is the device ID of the HDHomeRun you wish to access/upgrade. Click on the Device ID, switch to the firmware tab, select the downloaded file, and click Upgrade.

Where is the HDHomeRun setup program?

If you need to change the DVR settings in the future, you can find the HDHomeRun Setup program on your Start menu in the HDHomeRun folder.

What version of DrivePool is needed for HDHomeRun?

To work with HDHomeRun DVR you need DrivePool version 2.2.3.946 or newer.

How to enable DVR on PC?

Enable the DVR: Click on the DVR tab in HDHomeRun Setup. Check the “Use this PC for recordings” box.

Can a DVR be wireless?

Wired network connection. The DVR will handle a great deal of video traffic, so wireless connections should be avoided.

What is HDHomerun app?

The HDHomeRun app is the main way to access live TV from your HDHomeRun tuner, and to set and watch recordings from your HDHomeRun DVR subscription. Our app is available for Android, Fire TV, iOS, Mac OS, Windows, and Xbox One.

Where to find recordings on HDHomeRun?

App: Recorded tabIn the RECORDED tab you can find all recordings made by all of your connected HDHomeRun DVRstorage devices on your local network, if you have an HDHomeRun DVRsubscription. Recordings are organized by “All recordings”, “Shows”, and “Movies”.

How to search for a specific channel on TV?

Search:Typing numbers or letters while on live TV will open the search option. You can use this to switch to a specific channel number, channel name, or even show title. For example, using a remote with a keypad, you can enter “1004” + ENTER and it will switch to channel 1004.

What does zoom do?

Zoom -zooms picture to fill screen, such as for programs that are a different aspect ratio (action bar only)

Can you use HDHomerun on multiple channels?

If multiple users are using the HDHomeRun app on the same channel, the DVR storage engine will distribute the load so that only one tuner is used for one channel.

How to enable channel slice on a DVR?

Channel Slice – select a channel on the channel list, use the left/right arrows or drag the channel to the left to enable Channel Slice. Non- DVR subscribers will have access to 24 hours of guide data.

Can HDHomerun record?

All devices using the HDHomeRun app can set recordings, and all devices can access any recording made.

Remote-access Guide