as I explained in that thread (linked below) those remote cameras had likely been connected to iVMS-4200 using Hik-Connect and when added this way you cannot access the remote configuration settings of the cameras to change the time, you will have to go to the camera site to find the camera IP addresses with SADP and login to the cameras directly so you can change details like the time/date settings.
Full Answer
What is Hikvision ivms-4200 client software?
iVMS-4200 Client Software is designed to configure and manage Hikvision devices in a unified and intuitive manner, including access control devices and video intercom devices. The software provides multiple functionalities, including person management, access control, video intercom, time & attendance, etc.
How to correct the time on my Hikvision DVR/NVR/IP camera?
If you see the time on your Hikvision DVR, NVR or IP Camera is not accurate, you can refer to the below guide on how to correct it. 1) Use your PC, open the web browser - Chrome, Firefox, Sarafi, etc. 2) Enter the local IP Address of your Hikvision DVR,...
How do I remotely access my Hikvision device?
Introduction The following guide will guide you through the necessary steps to remotely access your Hikvision device with another PC, Laptop, Tablet, Smartphone or iPhone. Before proceed please connect your device to your router and obtain a computer that is already connected to the same router or LAN.
What is ivms-4200 AC client user manual?
iVMS-4200 AC Client User Manual x Chapter 1 Over view 1.1 Introduction iVMS-4200 Client Software is designed to configure and manage Hikvision devices in a unified and intuitive manner, including access control devices and video intercom devices.
How do I change the time on my Hikvision camera?
Configure Time SettingsEnter the Settings page of the device. ... Enter the Remote Configuration page. ... Tap Time Configuration to enter the Time Configuration page.Select the time zone in which the device locates. ... Select the time synchronization mode. ... Tap to save the settings.
How does iVMS-4200 sync time?
On iVMS-4200 Checked the system you wish to sync the time and click on ok. If the system is online, the iVMS-4200 software will update the date/time of the system. Under General->Auto Time Adjustment, select the daily timing you wish the iVMS-4200 software to update all your CCTV's date/time on a daily basis.
How do I set the time on my CCTV camera?
0:071:10How to Change the Time & Date on DVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're going to first thing is go to menu down at the bottom. Left. From there we are going to go toMoreWe're going to first thing is go to menu down at the bottom. Left. From there we are going to go to configuration. In general. Our first problem is our time is set to eastern time zone or scroll.
How can I change the date format in Hikvision NVR?
1 Answer. To change the date format that is displayed on the screen you need to edit the on screen display (OSD) settings. The other date format option under system settings does not change the format on the live view.
How do I change my IP camera time?
To correct the time instantly, go to IP Camera > Edit > Optimization and enable force synchronization. You can also go to the web UI of the camera, manually configure the time settings first, and then enable synchronization with the NTP server.
Why does my DVR time keep changing?
The time on your DVR / NVR can be configured manually, or automatically by enabling Network Time Protocol (NTP). If the recorder is showing the incorrect time, or the time is resetting, adjust your time configuration settings by enabling / disabling NTP.
Does the clock time on the video recorder ever change?
All recorded footage has a timestamp- and the timestamp is based on your recorders and/or cameras current time settings. Improper time settings will eventually result in an incorrect timestamp on the footage by an hour or more.
What is DST in hikvision?
Sometime the device date/time may be incorrect. In order to avoid this, HIKVISION devices use NTP (Network Time Protocol) as well as DST (Daylight Saving Time) to adjust device time.
How do I change the time on my Dmss app?
Tap , select the date, and then set the start time and end time of the period (up to 6 periods can be set each date).
How do I change the time on NVR?
Open Main MenuOpen Main Menu. Go to your DVR/NVRs Main Menu screen.Go to General Settings. Select System Settings.Date & Time Tab. Under General System Settings, select the “Date&Time” tab. Double check your current system time settings. Enable (click the checkbox) the DST (Daylight Savings Time) feature.
What is DST setting in NVR?
The DST function allows you to configure your Hikvision DVR/NVR to automatically adjust its time for Daylight Savings in your time zone. It's very important to have the correct DST settings otherwise when the time changes you'll have the wrong timestamp in your recordings.
What is NTP on Hikvision DVR?
In order to avoid an incorrect timestamp, Hikvision devices use NTP (Network Time Protocol) as well as DST (Daylight Saving Time) to adjust the device's time.
How do I change the time on my CCTV CP Plus?
1 Step # Open Software and Go to Device Config. After Opening the software go to New by clicking on the plus sign ( + ) on the header section and then go to the configuration section and click on device cfg. ( ... 2 Step # Select Device and Open Setting. ... 3 Step # Go to Date & Time Tab. ... 4 Step # Do Final Setting and Save it.
How do I set the time on my NVR?
0:103:20Set Date and Time NVR XVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou know its system under configuration. Because of the gear icons. So once you click on that you'reMoreYou know its system under configuration. Because of the gear icons. So once you click on that you're gonna click on the general. And under general you're gonna find date. And time.
How do I change the time on my Idmss plus?
Step by Step Instructions IDMSS/GDMSS version 3.50. 000From the home screen select "Camera"Select the Menu Icon -> Select playback.Select the + Icon to for a device to playback.Choose a beginning date and time -> end date and time.Toggle on to choose record type. ( ... Select a device from the list to playback.
How to check IP address availability?
a)You can check the IP address availability by performing the “Ping” command (Fig. 2). In order to do that you need to type ping 192.168.1.4 at the command promptwindow.
Can you enable DHCP in DVR?
a) You can enable the DHCP checkbox in the DVR Network Configuration interface:
Can I remotely access my Hikvision device?
The following guide will guide you through the necessary steps to remotely access your Hikvision device with another PC, Laptop, Tablet, Smartphone or iPhone. Before proceed please connect your device to your router and obtain a computer that is already connected to the same router or LAN. Also make sure that your computer can access the internet. After properly port-forwarding (also called port-mapping) your router you will be able to access your device by using an internet browser, such us IE, Chrome, Firefox or Safari and/or our client software iVMS4200.