These are the default ports on a Hikvision NVR or DVR:
- HTTP port: 80 (this is the port used to access the recorder locally or remotely via web browser)
- Server port: 8000 (this is the port used by the phone app)
- RTSP port: 554 (this is the port used for live streaming. Read more here .)
- HTTPS port: 443 (this is the HTTP port if you have installed an SSL Certificate on the...
How to enable DHCP on Hikvision DVR?
a) You can enable the DHCP checkbox in the DVR Network Configuration interface: Using the GUI In Live View mode right click with a mouse to access the Main Menu. Click on Configuration and then Network (Fig. 7) Check the DHCP radio box, and click Apply. Reboot the system.
How to configure Hikvision DVR on Android mobile?
The steps to access a Hikvision DVR from a mobile are very simple. Just install the iVMS-4500 App in the mobile phone, click the Hik-connect button to create an account and finally add the DVR by pointing the mobile camera to the DVR QR Code. This process is very simple and work for Hikvision remote view.
How to reset Hikvision DVR NVR IPC admin password?
Hikvision NVR/DVR Password Reset by local menu. In your NCR/DVR Local GUI, double click the left bottom interface to popup password reset option. Send the Device Serial Number and Device Startup time to Hikvision Support team (Refer Option1). Support team will send you back the reset Security code. Enter the security code and click OK to Reset ...
How to setup Hikvision DVR for Google Drive recording?
How to setup a Hikvision DVR (basic configuration)
- Hikvision DVR setup. After installing the HDD and connecting the cables, it's time to setup your Hikvision DVR. ...
- Set the date and time. Your Hikvision DVR is ready for recording, but you don't want to have the wrong date and time in your footage, right ?
- Hikvision DVR recording setup. ...
- Learn more about the Hikvision DVR. ...
See more
What ports need to be open for Hikvision DVR?
You will need to open up the following ports :HTTP Port = 80.Server Port = 8000.RTSP Port = 554.HTTPS Port = 443.
How do I access my Hikvision DVR remotely?
Enable remote HTTP access, so that the router can be reached from a remote location. Specify an Access Point Name (APN) for the SIM card in use, so that the router will obtain a Public IP address. Configure a Port Forwarding rule that redirects all connections from one Port to the camera's IP address:Port.
How can I change my Hikvision DVR port?
How to: Configure Port Forwarding on a Hikvision RecorderLog in to your DVR as the admin (default password is 12345).Open the Main Menu, click the Configuration button, Network and then General.Tick the box which says DHCP.Click the Apply button in the bottom right of the screen, now close the menu.More items...•
What ports does iVMS 4200 use?
For the device the ports are 80(HTTP port), 8000(Device service port), 1554(RTSP port). For the SMS the ports are 554, 12000-13000. Step 5: After you do port mapping, you can get access to it from the public network. Run iVMS-4200 in PC2 and add the device and SMS.
How can I remotely access my DVR?
How to Remote Access a DVRCreate and Configure a Dynamic DNS Account.Set Up a Dynamic DNS on the Router.Connect the MPEG-4 DVR and Locate the DVRs IP Address.Setting up a Virtual Service on the Router.Install the Remote Viewer Software for Remote Internet Access.
How can I view my CCTV from anywhere?
Install viewing software. The viewing software may be proprietary to your CCTV provider. The best CCTV providers have a smart app that you can install on any mobile device and then track it yourself. Companies like Pro-Vigil offer viewing software for free that you can download to your mobile devices.
Which ports does HIK connect use?
Log into the router and port forward ports 80,8000,554 as standard. These can be changed if needed but use the new ports if you decide to change them.
How do I port forward my DVR?
1:326:37Port Forwarding Setup For Remote Access NVR/DVR - YouTubeYouTubeStart of suggested clipEnd of suggested clip1. And the land port given is the 82 these two ports are already configured in the particular deviceMore1. And the land port given is the 82 these two ports are already configured in the particular device dot as the user can choose different LAN port and land port.
What protocol does Hikvision use?
Hikvision protocol is 8000 port and Onvif protocol is 80 port.
What port does DVR use?
This DVR uses two ports: 80 and 6100 (by default). You will need to forward both of these ports to the LAN IP address of your DVR, using two separate Port Forwarding entries. Some routers will have the ability to forward a range of ports.
What is Hikvision DVR server address?
To connect to the Encoder/DVR, we will need to set the computer's IP address to a static address. The address is 192.168. 1.1.
What is port 554 RTSP?
Port used by Real Time Streaming Protocol (RTSP) for Microsoft Windows Media streaming services and QuickTime Streaming Server (QTSS). RTSP uses the following ports: 554 TCP - used for accepting incoming RTSP client connections and for delivering data packets to clients that are streaming by using RTSPT.
How can I access my Hikvision DVR remotely from mobile?
How to Use Hik-Connect on Mobile for both iOS and Android?Download the “Hik-Connect” app from the iOS app store or Google Play. How to Use Hik-Connect on Mobile (iOS and Android)Open the app. ... Now you have two options: either login your Hik-Connect account, or add your device to the Hik-Connect App directly.
How can I see Hikvision on multiple devices?
Steps: On the More page, tap More->Manage Sharing Settings to enter the Manage Sharing Settings page. Tap to enter the Recipient page....Option 2Tap Add Recipient.Enter the email address or the mobile phone number.Tap to add the account to the account list.Select the account from the account list and then tap Next.
What is the IP address of my Hikvision DVR?
To connect to the Encoder/DVR, we will need to set the computer's IP address to a static address. The address is 192.168. 1.1.
How can I remotely access my Hikvision camera on my laptop?
Enabling Hik-Connect On your computer open SADP Tool. ... Select your NVR or DVR from the list by ticking the box to the left of it. ... When you select the device you will see a panel of information on the right that looks like the one in the image above.More items...•
When will Hikvision port forwarding be available?
Hikvision port forwarding (step-by-step) June 9, 2020. Hikvision No Comments. It's important to understand how the Hikvision port forwarding works so you can have access to the IP cameras, DVR and NVR remotely from the Internet.
Does Hikvision use ports?
Each device connected to a network and the Internet use ports for different types of services. The same is true or a Hikvision DVR as shown in the picture below.
How to change Hikvision port?
You can change these ports locally as well. Right-click with your mouse, go to the Main Menu, then login with your username and password. Navigate to the Configuration section and after that click the Network tab. On the top, you need to select the Ports tab.
How to change the port on a DVR?
Login to your NVR (or DVR) via the web browser. Type the IP address or the DDNS address on the url bar then enter your username and password. Navigate to Configuration > Network > Basic Settings and select the Ports tab. As you can see in the picture you can modify them as you wish. For example in our case, the http port is 82.
What is the port range of a NVR?
Never leave the default ports, especially if you have decided to expose your NVR on the internet. The port range can be anything between 1-65535.
What port is used to access the recorder?
HTTP port: 80 (this is the port used to access the recorder locally or remotely via web browser)
How to do port forwarding?
Port forwarding should only be used when the devices need to be accessed via the internet. There are two ways to open up the ports for your Hikvision device.
How to connect to a DVR?
Step 1: Setting Up on Your LAN (Internal Network) 1 Log in to your DVR as the admin (default password is 12345). 2 Open the Main Menu, click the Configuration button, Network and then General. 3 Tick the box which says DHCP. 4 Click the Apply button in the bottom right of the screen, now close the menu. 5 Wait for 30 seconds, bring up the Main Menu, click the Maintenance button and then the Network Tab and take note of the IP Address. It will likely look similar to: “192.168.***.***” we will refer to this as IP Address 1. 6 Take note of the DefaultGateway. It will look similar to: “192.168.***.***”. We will refer to this as the IP Address 2. 7 Open Internet Explorer and enter IP Address 1 into the address bar. You may need to add your DVR as a Trusted Site in Internet Explorer. To do this:#N#– Press the Alt key on your keyboard.#N#– Click Tools -> Compatibility view settings.#N#– Add the address to this list#N#– Re-type IP Address 1 into the address bar of Internet Explorer. 8 Login to your DVR with your username (default is admin) and password (default is 12345). 9 Once you have logged in you will be presented screen which will allow to bring up the live camera view
What is the password for DVR?
Login to your DVR with your username (default is admin) and password (default is 12345).
How to add DVR to trusted site?
To do this: – Press the Alt key on your keyboard. – Click Tools -> Compatibility view settings. – Re-type IP Address 1 into the address bar of Internet Explorer. Login to your DVR with your username (default is admin) and password (default is 12345).
Turbo HD DVRs with AcuSense
Based on deep learning technology, Turbo HD DVRs with AcuSense focus on human bodies and vehicles, liberating users from time-consuming browsing and searching.
Pro Series
Pro Series DVRs support HD videos, H.265 Pro+ and H.265 encoding technology, 4K resolution output, power over coax (PoC), multiple VCA events, and more.
Special Series
Hikvision's solution for the banking sector - ATM systems. ATM devices are equipped with smart analysis functions. These functions include multi-channel analyses based on preset rules on certain behaviors in the immediate vicinity of the ATMs.
Value Series
Value Series DVRs offer a cost-effective and high quality video surveillance solution with H.265 Pro+ and H.265 Pro compression technology, up to 5 MP Ultra HD encoding ability and great durability.
Ultra Series
With excellent performance, the Ultra Series DVRs can accommodate up to 32 channels of analog cameras. They have strong hybrid access capability. The 8 SATA interfaces are particularly useful for users who require larger storage space.
How to check IP address availability?
a)You can check the IP address availability by performing the “Ping” command (Fig. 2). In order to do that you need to type ping 192.168.1.4 at the command promptwindow.
Where is the ipconfig command?
b) Windows NT, 2000, and XP users: Locate the Windows icon in the bottom left corner of the task bar. Click Run. Type cmdor commandand press enter. Following the available prompt, type ipconfigand press Enter.
What does it mean to have bellow ports forwarded?
By enabling bellow ports to be forwarded to a device’s IP address on your local network router it will provide users with remote access to the device from the internet. For more information about Port Forwarding please refer to http://portforward.com/
How to check if port forwarding is working?
Open an Internet browser and visit the website (Fig. 14): http://www.yougetsignal.com/tools/open-ports/ The open port checker is a tool you can use to check your external IP address and detect open ports on your connection. This tool is useful for finding out if your port forwarding is setup correctly or if your server applications are being blocked by a firewall.
Can you enable DHCP in DVR?
a) You can enable the DHCP checkbox in the DVR Network Configuration interface:
Can I remotely access my Hikvision device?
The following guide will guide you through the necessary steps to remotely access your Hikvision device with another PC, Laptop, Tablet, Smartphone or iPhone. Before proceed please connect your device to your router and obtain a computer that is already connected to the same router or LAN. Also make sure that your computer can access the internet. After properly port-forwarding (also called port-mapping) your router you will be able to access your device by using an internet browser, such us IE, Chrome, Firefox or Safari and/or our client software iVMS4200.
