- Connect a monitor and a mouse to the Hikvision DVR
- Open the DVR Main Menu
- Click on Configuration
- Configure the IP, Subnet Mask and Gateway
- Open a Web Browser and insert the DVR IP. After following those steps you will be able to have local access to the cameras that are connected to the ...
How to enable DHCP on Hikvision DVR?
a) You can enable the DHCP checkbox in the DVR Network Configuration interface: Using the GUI In Live View mode right click with a mouse to access the Main Menu. Click on Configuration and then Network (Fig. 7) Check the DHCP radio box, and click Apply. Reboot the system.
How to add IP camera in Hikvision DVR?
- IP camera address: 192.168.1.100
- Protocol: ONVIF
- Management port: 80
- Transfer protocol: Auto
- Username: admin
- Password: camera’s password.
How to configure Hikvision DVR on Android mobile?
The steps to access a Hikvision DVR from a mobile are very simple. Just install the iVMS-4500 App in the mobile phone, click the Hik-connect button to create an account and finally add the DVR by pointing the mobile camera to the DVR QR Code. This process is very simple and work for Hikvision remote view.
How to connect my Hikvision DVR to a JioFi device?
- Insert sim card and connect power supply
- Connect you CCTV DVR to this device using LAN
- Now Enjoy. That’s
How do I access my Hikvision DVR remotely?
Enable remote HTTP access, so that the router can be reached from a remote location. Specify an Access Point Name (APN) for the SIM card in use, so that the router will obtain a Public IP address. Configure a Port Forwarding rule that redirects all connections from one Port to the camera's IP address:Port.
How do I log into Hikvision NVR remotely?
Go the following menu location: Configuration --> Network --> Platform Access. PRODUCTS: HIKVISION DEVICES TOPICS COVERED IN THIS KBA: How to enable Hik-Connect remote access on HIK devices (NVR/DVR/Camera). c. Select the Enable tick box at the top of the page.
How can I access my Hikvision DVR from mobile?
How to Use Hik-Connect on Mobile for both iOS and Android?Download the “Hik-Connect” app from the iOS app store or Google Play. How to Use Hik-Connect on Mobile (iOS and Android)Open the app. ... Now you have two options: either login your Hik-Connect account, or add your device to the Hik-Connect App directly.
What is remote Configuration in HIK-connect?
After adding a device, you can set the parameters of the device, including basic information, time settings, recording schedule, etc. Edit Information of Cameras Linked to Added Device. Set Video and Image Encryption.
What is the IP address of Hikvision DVR?
To connect to the Encoder/DVR, we will need to set the computer's IP address to a static address. The address is 192.168. 1.1.
How do I access my NVR remotely?
There are 6 steps to setting up your NVR for remote viewing:Understand Your Network.Setup DDNS.Setup A Port Forward.Assign The DDNS Hostname To Your NVR.Set Two IP Addresses For Your NVR.Verify That Local Viewing and Remote Viewing Work.
How do I connect my DVR to my phone?
0:316:00How to connect to a DVR using an Android Phone - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first information you have to get is the internal IP of your DVR. The TCP port of the DVR. AndMoreThe first information you have to get is the internal IP of your DVR. The TCP port of the DVR. And the username and password to. Start we're going to click this icon right here on the top left corner.
What is the Hik-Connect server address?
b) The DNS Server address is suggested to set as 8.8. 8.8 or local frequently-used DNS address. c) Try to change Server address, change dev.hik-connect.com to litedev.hik-connect.com or change litedev.hik-connect.com to dev.hik-connect.com.
How can I see CCTV on mobile?
HOW TO CONNECT CCTV TO ANDROID OR IPhone ?Step 1: CONNECT DVR TO MONITOR DIRECTLY. ... Step 2: CONFIGURE CCTV DVR SETTINGS. ... Step 3: NOW CONFIGURE WIFI ROUTER FOR DVR. ... Step 4: CONNECT DVR TO WIFI VIA LAN CABLE. ... Step 5: CHECK THE SETTINGS. ... Step 6: NOW CONNECT TO ANDROID PHONE. ... 1 Person Made This Project! ... 74 Comments.
How can I access my camera remotely?
How to view your IP camera remotely via a web browserFind your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.After you change the port, you will need to reboot the camera in order to save the changes.More items...•
How can I access my Hikvision DVR from my laptop?
Enabling Hik-Connect Service on WebOpen the web browser on your PC.Input the device IP address and press the Enter key on your keyboard.Input the device user name and the device password to login.Tap Configuration – Network – Advanced Settings – Platform Access to enter the Platform Access page.Check Enable.More items...
How can make Ddns in Hikvision DVR?
Set DDNSEnter the Settings page of the device. On the device list page, if the page is in list mode, swipe the device's name to the left and tap . ... On the Settings page, tap Configure DDNS to enter the Configure DDNS page.Set the required information. Device Domain Name. ... Tap .
How do I turn off Hikvision NVR remotely?
On the old Hikvision CCTV recorder right click with the mouse, click menu, then click shutdown at the bottom right, and then click shutdown again. You'll see a message “system is shutting down please wait” after few seconds it will then show “Please power off”.
What is HIK Connect server address?
To do this we will navigate using the web-based GUI to Configuration >> Network >> Advanced Settings >> Platform Access and ensure that it is enabled and the “Platform Access Mode” is set to Hik-Connect, we will then ensure that the “Server Address” is 'dev.eu.hik-connect.com' and press “Save”.
What is stream key in Hikvision?
What is the stream key? This is also known as the verification code, which is an extra layer of security to prevent malicious actors from remotely adding and viewing your cameras using the QR code/serial number of the device. This guide relates to Hikvision cameras running iVMS-4200 software.
How can I access my camera remotely?
How to view your IP camera remotely via a web browserFind your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.After you change the port, you will need to reboot the camera in order to save the changes.More items...•
How to enable Hik Connect on a recorder?
Enabling Hik-Connect on the recorder GUI 3.0. 1) Right-click and select Menu and then browse to Configuration > Network > Platform Access. 2) Tick the Enable box. You will then be prompted to create a Verification Code, set this as something memorable, and please make a note of it as you will need it again shortly.
How long does it take to set up a Hikvision CCTV system?
The steps are easy and logical and the procedure can be finished in 5-10 minutes.
How to register a Hik Connect account?
You can consult this article on how to register a Hik-Connect account. 1) On your phone or tablet install the Hik-Connect app. 2) Select your Region, press Login, and then Register. Follow this process as instructed by the app. 3) Once you have logged in press the + icon in the top right corner, highlighted on the image below, ...
How to connect a DVR to a router?
Connect your NVR or DVR to your network by running an Ethernet cable from the LAN port on the recorder directly to your router. Install the Hik-Connect app on your phone or tablet (from App Store or Google Play store). The first step of this process is slightly different depending on which version of the Hikvision software is installed on your ...
How to check IP address availability?
a)You can check the IP address availability by performing the “Ping” command (Fig. 2). In order to do that you need to type ping 192.168.1.4 at the command promptwindow.
Where is the ipconfig command?
b) Windows NT, 2000, and XP users: Locate the Windows icon in the bottom left corner of the task bar. Click Run. Type cmdor commandand press enter. Following the available prompt, type ipconfigand press Enter.
Can you enable DHCP in DVR?
a) You can enable the DHCP checkbox in the DVR Network Configuration interface:
Can I remotely access my Hikvision device?
The following guide will guide you through the necessary steps to remotely access your Hikvision device with another PC, Laptop, Tablet, Smartphone or iPhone. Before proceed please connect your device to your router and obtain a computer that is already connected to the same router or LAN. Also make sure that your computer can access the internet. After properly port-forwarding (also called port-mapping) your router you will be able to access your device by using an internet browser, such us IE, Chrome, Firefox or Safari and/or our client software iVMS4200.
How to playback a video on Hikvision DVR?
If the Setup for your Hikvision DVR is correct, you should be able to playback the recorded videos. Just right click the screen and choose " Playback ". In the playback menu, you can choose the camera, date and time you want to playback.
How long does it take to setup a Hikvision DVR?
Setup a Hikvision DVR for basic recording and monitoring is usually a quick task that doesn't take more than 10 minutes, assuming you already have your cameras installed and connected to the DVR. Let's discuss the configuration.
How to make sure HDD is installed?
The first thing you need to do is to make sure the HDD is correctly installed. Just click the screen with the mouse right button and choose " Menu ".
What is the default camera for Hikvision?
If you are using Hikvision cameras the default technology is HD-TVI, for Samsung cameras the default technology is AHD, other low-resolution cameras are CVBS. Make sure which technology your cameras use and check the boxes.
What hard drive do I need for surveillance?
IMPORTANT: You must use a Surveillance Hard Drive that is designed to work with recorders. I recommend Discs from Seagate and Western Digital.
Can I use a VGA monitor with Hikvision?
That's the minimum you must have to have your Hikvision DVR up and running locally. As you can see in the picture an HDMI cable is being used but you could also use a VGA monitor, although it's not recommended anymore.
Can you record a video with motion?
You can select continuous or motion recording among other options, select motion to have the video from the camera recorded only when there are movements in front of the camera, this can save you space in the hard drive.
