Remote-access Guide

hikvision ip camera remote access

by Eda Turner Published 2 years ago Updated 2 years ago
image

How to view your IP camera remotely via a web browser Find your camera’s IP address. Open a web browser and type the IP address. Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.

Part of a video titled How to set up Hik-Connect for remote viewing on ... - YouTube
8:58
10:58
Settings. Under advanced settings we want to click on platform. Access so we need to make sure it isMoreSettings. Under advanced settings we want to click on platform. Access so we need to make sure it is enabled in here if it's not you'll need to enable it and set up an encryption key.

Full Answer

How to remotely access Hikvision NVR from computer?

Then you should modify the IP of network camera to … In order to remotely access a Hikvision NVR from a computer, you will require … You can add multiple camera systems to iVMS (e.g., you have multiple sites with … Source: Hikvision How To Connect To Phone • BYRGPUB.COM Hik Connect for PC or laptop can let you view footage on a remote device.

What is the best and fastest way to connect to Hikvision?

I think the last option (use a cloud service) is the best and fastest one.... You can use a web browser such as Google Chrome, Internet Explorer, Firefox, or Safari to connect to your Hikvision camera via Internet, as long as you have your router ready to forward the traffic from your local network.

How to connect Hikvision camera to Hikvision ivms-4200?

There are many options available out there, but if you want to keep it simple, just use the Hikvision software iVMS-4200 to connect to the camera. Once again, you can either use the software for local connection or use the port forwarding configuration to connect via the Internet.

How to enable HIK-connect?

The picture below shows how to enable the Hik-connect. The process is straightforward, just open the network menu, go to the advanced settings tab, click the "Platform Access" option and click "Enable". After this step, just visit the Hik-connect website and create your account to get the verification code.

image

How can I access my camera remotely?

How to view your IP camera remotely via a web browserFind your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.After you change the port, you will need to reboot the camera in order to save the changes.More items...•

How can I watch Hikvision camera?

Step1: Create a google account, and login YouTube with this account. ... Step2: Click on 'CREATE' and 'Go live'. ... Step3: After the account is activated, you can start configuring the live stream. ... Step4: On the camera web page, go to 'Configuration > Network > Advanced settings > RTMP'. ... Step5: ... Step6:

Can you view HIK connect on PC?

Hik-Connect for PC. You can use Hik-Connect on your PC through this Add-on.. Want to secure your home, workplace, and office more. Place the CCTV cameras in a different direction and leave the rest of the work at Hik Connect.

What is RTSP port hikvision?

If you own a Hikvision device such as an IP camera or a NVR/DVR, you can use the RTSP protocol to live stream. RTSP stands for Real Time Streaming Protocol, a network protocol for streaming the videos in real-time. Basically, it's designed to send audio or video live from one device to another.

How can I see HIK connect on my phone?

How to Use Hik-Connect on Mobile for both iOS and Android?Download the “Hik-Connect” app from the iOS app store or Google Play. How to Use Hik-Connect on Mobile (iOS and Android)Open the app. ... Now you have two options: either login your Hik-Connect account, or add your device to the Hik-Connect App directly.

How can I access Hikvision remotely from my computer?

Enabling Hik-Connect Service on WebOpen the web browser on your PC.Input the device IP address and press the Enter key on your keyboard.Input the device user name and the device password to login.Tap Configuration – Network – Advanced Settings – Platform Access to enter the Platform Access page.Check Enable.More items...

How do I open Hikvision camera in Chrome?

To view your device using the Chrome browser, you must add the IE tab extension to Google Chrome. The IE tab emulates the IE rendering engine which allows the use of Java, Silver Light, and Active X controls that work with Hikvision devices.

How do I find my Hikvision camera IP address?

Go to Configuration > System > Camera Management > Click on the blue link next to the camera you wish to log into. There you have it – you're now logged into the camera and ready to perform actions on the camera. Load up SADP – you should see all the IP addresses of the cams listed.

How can I get RTSP stream from Hikvision camera?

5:3810:48HIKVISION RTSP STREAM SETUP - YouTubeYouTubeStart of suggested clipEnd of suggested clipCamera streaming channels 101 click play it will prompt me for the username. And password. So itMoreCamera streaming channels 101 click play it will prompt me for the username. And password. So it will happily put this in. And now you have the stream directly off the fisheye.

How do I access hikvision RTSP stream?

If the ID is 102, we will get sub stream of the 1st channel. If the ID is 101, we will get main stream. RTSP URL supports to add username and password: rtsp://admin:12345@IP:Port/Streaming/Channels/ID/?transportmode=multicast. The type of authorization supports BASIC and DIGEST.

How do I get IPC Mjpeg stream?

How to Get IPC MJPEG Stream via HTTP Commands on Hikvision Cameras. a) HTTP commands get stream only be available under Sub stream. b) Go to [Configuration]-[Video/Audio]-[Video], set the Stream Type as Sub-stream and Video Encoding as MJPEG. Resolution can be adjusted according to the current condition.

How do I find my camera RTSP?

How do I find my RTSP IP Camera URL?The first method of finding the RTSP IP camera URL is by taking a look at the camera manual that comes with each product. ... The second method is through the camera web page, used for configuring each IP camera and network video recorder.More items...•

How to access IP camera?

One way to access those IP cameras is by unplugging them, connecting the camera to a external switch then modifying the IP address via the laptop and accessing it via the web browser. As you can see, this method takes a lot of work and imagine if you have a lot of cameras that need to have the settings adjusted.

Where are IP cameras plugged in?

The IP cameras are plugged in straight to a PoE NVR. As you can see in the next diagram, in this kind of setup the IP cameras are plugged in directly at the back of the PoE NVR. So, the cameras are connected straight to the PoE NVR and the NVR itself is connected to the router where the laptop/computer is getting the internet from.

How to find the IP address of a NVR?

The first step consists of finding the IP address of your NVR. You can find it via the NVR’s local interface on the Network settings (as shown on the screenshot below) or you install the SADP tool on your laptop and the tool will show the current IP address of the NVR.

Can a laptop see a NVR?

In other words, the laptop/computer can see the NVR since they’re on the same network but can’t see the camera since technically they’re located on a different and separate network. Of course there’s a way to access the camera and that’s by using the Virtual Host feature that most of the NVRs support.

Can an IP camera be connected to an external switch?

The IP cameras are connected to an external switch. As shown in the diagram below, the IP cameras are connected to an external (PoE) switch and the NVR is connected to the same switch (or straight to the router). In this case all the devices are in the same network and the NVR can see the IP cameras via the network.

Can you adjust the camera settings on a NVR?

While you can adjust many settings on the camera by using the NVR’s interface, there are certain settings that can be adjusted only by accessing the camera directly. In a few words, when going to the camera directly you have control over all the settings of that camera.

Where is the ipconfig command?

b) Windows NT, 2000, and XP users:  Locate the Windows icon in the bottom left corner of the task bar.  Click Run.  Type cmdor commandand press enter.  Following the available prompt, type ipconfigand press Enter.

How to check IP address availability?

a)You can check the IP address availability by performing the “Ping” command (Fig. 2). In order to do that you need to type ping 192.168.1.4 at the command promptwindow.

Can you enable DHCP in DVR?

a) You can enable the DHCP checkbox in the DVR Network Configuration interface:

Can I remotely access my Hikvision device?

The following guide will guide you through the necessary steps to remotely access your Hikvision device with another PC, Laptop, Tablet, Smartphone or iPhone. Before proceed please connect your device to your router and obtain a computer that is already connected to the same router or LAN. Also make sure that your computer can access the internet. After properly port-forwarding (also called port-mapping) your router you will be able to access your device by using an internet browser, such us IE, Chrome, Firefox or Safari and/or our client software iVMS4200.

How to enable Hik Connect on a recorder?

Enabling Hik-Connect on the recorder GUI 3.0. 1) Right-click and select Menu and then browse to Configuration > Network > Platform Access. 2) Tick the Enable box. You will then be prompted to create a Verification Code, set this as something memorable, and please make a note of it as you will need it again shortly.

How long does it take to set up a Hikvision CCTV system?

The steps are easy and logical and the procedure can be finished in 5-10 minutes.

How to register a Hik Connect account?

You can consult this article on how to register a Hik-Connect account. 1) On your phone or tablet install the Hik-Connect app. 2) Select your Region, press Login, and then Register. Follow this process as instructed by the app. 3) Once you have logged in press the + icon in the top right corner, highlighted on the image below, ...

How to connect a DVR to a router?

Connect your NVR or DVR to your network by running an Ethernet cable from the LAN port on the recorder directly to your router. Install the Hik-Connect app on your phone or tablet (from App Store or Google Play store). The first step of this process is slightly different depending on which version of the Hikvision software is installed on your ...

How to access Hikvision camera?

You can access your Hikvision IP camera via a web browser, software, smartphone, or even via the cloud. It's just a question of having the right configuration.

How long does it take to connect a Hikvision camera to the cloud?

You can have your Hikvision camera connected to a cloud in less than 5 minutes.

How to enable network access?

The process is straightforward, just open the network menu, go to the advanced settings tab, click the "Platform Access" option and click "Enable".

Where does my camera get its IP address?

Your camera gets the IP from the router , and then you can open a web browser and type the IP address to have access to the camera, as shown in the picture below.

Can you use Hikvision camera on the internet?

You can use the Hik-connect service to have your Hikvision camera available via the Internet so you don't need to deal with the port forwarding configuration.

Hik-Connect for Small Business Surveillance

Get easy access to devices with Hik-Connect – powered by P2P technology – and forget outdated and complicated network configuration.

Hik-Connect for Residence Surveillance

When you are at work or on vacation and a visitor rings the doorbell, you will receive a message on your smartphone. You can then have the power to talk with your visitor remotely through Hik-Connect, adding a very powerful level of security to your home.

Install the App on your mobile phone

OK, now that you have the basic information about the DVR IP and ports you are ready to download the App for remote DVR access.

Open the iVMS-4500 App and create an account

Open the iVMS-4500 App and click on the button to open the left menu and then click on the button Hik-Connect. (see the picture below).

Add the DVR to the iVMS-4500 App

The App opens the camera to scan the QR code that is located in your DVR.

Understanding how the DVR must be connected

OK, now that you have the solution to connect your Hikvision DVR using the mobile phone, perhaps you want to understand a little bit more about the connection and configuration of the DVR.

1. DVR local connection and configuration

Take a look at the diagram below to better understand how you need to connect your DVR in the network. The connection is very simple.

2. DVR and mobile App remote configuration

This is the part where you install and configure the iVMS-4500 App for remote access to the Hikvision DVR and this step is on the top of this article.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9