HOW TO ENABLE HIK-CONNECT REMOTE ACCESS ON HIK DEVICES (NVR/DVR/CAMERA) Methods Available: - via device local GUI (for DVRs/NVRs) - via device web browser (for DVRs/NVRs/Cameras) Method 1 - Enable Hik-Connect via device local GUI (for DVRs/NVRs) Steps: a. Right click and Select Menu and then Login as admin user. b.
How to set up NVR remote access?
Setup
- Port Forwarding Theory
- Setup Remote Access via Portforwarding (IP)
- Locate Device on Network via ConfigTool
How to connect Hikvision cameras not directly connected to NVR?
- Connect an Ethernet cable from your router to the back of your NVR. ...
- Connect an Ethernet cable from one of the PoE ports on your NVR to your camera. ...
- Connect a VGA or HDMI cable from the back panel of your NVR to a monitor or TV. ...
- Connect the included mouse to a USB port on the front or back of your NVR.
How to configure Hikvision IP camera with NVR?
Troubleshooting
- If you don’t receive a green status after some time you will want to review the Hikvision camera's settings to ensure the ONVIF protocol is enabled and the ONVIF user ...
- Try restarting the NVR and camera if you’ve verified all of the information is correct.
- You want to make sure the NVR and camera are on the same network and can communicate.
How to setup HIK connect on DVR and NVR?
How to Setup Hik-Connect P2P Service • Using the console of the NVR or DVR, select System Configuration from the Main Menu. • The system configuration menu is where to set the date and time, configure the network setting, change port numbers, enable Hik-connect P2P service, setup email, users accounts and more.
How do I access my NVR remotely?
To connect a DVR/NVR to the internet or configure a DVR/NVR for remote viewing, first and foremost, connect your DVR/NVR to your network router either via Ethernet cable or wirelessly. Network–enabled DVRs could be configured for remote viewing. Port forwarding is the key to remote viewing and remote access.
How can I access my Hikvision DVR from outside Network?
Enable remote HTTP access, so that the router can be reached from a remote location. Specify an Access Point Name (APN) for the SIM card in use, so that the router will obtain a Public IP address. Configure a Port Forwarding rule that redirects all connections from one Port to the camera's IP address:Port.
How can I read Hikvision NVR remotely on my PC?
Enabling Hik-Connect Service on WebOpen the web browser on your PC.Input the device IP address and press the Enter key on your keyboard.Input the device user name and the device password to login.Tap Configuration – Network – Advanced Settings – Platform Access to enter the Platform Access page.Check Enable.More items...
How do I access Hikvision NVR on my phone?
How to Use Hik-Connect on Mobile for both iOS and Android?Download the “Hik-Connect” app from the iOS app store or Google Play. How to Use Hik-Connect on Mobile (iOS and Android)Open the app. ... Now you have two options: either login your Hik-Connect account, or add your device to the Hik-Connect App directly.
How can I view my CCTV from anywhere?
How to view your IP camera remotely via a web browserFind your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.After you change the port, you will need to reboot the camera in order to save the changes.More items...•
How can I watch Hikvision DVR online?
Follow the step with us and get your hikvision dvr on internet....Step 1: Connect to computer. ... Step 2: Assign IP to DVR/NVR. ... Step 3: Open router and setting. ... Step 4: Hikvision DDNS setup.More items...
Can you view HIK connect on PC?
Hik-Connect for PC. You can use Hik-Connect on your PC through this Add-on.. Want to secure your home, workplace, and office more. Place the CCTV cameras in a different direction and leave the rest of the work at Hik Connect.
What is stream key in Hikvision?
What is the stream key? This is also known as the verification code, which is an extra layer of security to prevent malicious actors from remotely adding and viewing your cameras using the QR code/serial number of the device. This guide relates to Hikvision cameras running iVMS-4200 software.
How can I see my Hikvision camera on my computer?
Enabling Hik-Connect On your computer open SADP Tool. ... Select your NVR or DVR from the list by ticking the box to the left of it. ... When you select the device you will see a panel of information on the right that looks like the one in the image above.More items...•
How do I view NVR on my phone?
How do I connect my NVR to my Phone?Click on the “BACK” button. Tap the “+ Device” option to add a device.Enter IP address information and click “Save”. Your new device will be on the previous screen. ... Select new device and choose the channels you wish to see, click the Play/Live button.
How do I setup my Hikvision camera for remote viewing?
Setting up Hik-Connect 1) On your phone or tablet install the Hik-Connect app. 2) Select your Region, press Login and then Register. Follow this process through as instructed by the app. 3) Once you have logged in press the + Icon in the top right corner, highlighted on the image below, and then select Scan QR Code.
What is Hikvision wizard?
The Startup Wizard shows every time your Hikvision NVR or DVR starts up. Do you need to disable the Hikvision startup wizard? This is the right place to read. This function is convenient the first time you run your security camera recorder since it helps you do the initial basic setup by following the steps one by one.
How do I find the IP address of my Hikvision DVR?
Go to Configuration > System > Camera Management > Click on the blue link next to the camera you wish to log into. There you have it – you're now logged into the camera and ready to perform actions on the camera. Load up SADP – you should see all the IP addresses of the cams listed.
How do I setup my Hikvision camera for remote viewing?
Setting up Hik-Connect 1) On your phone or tablet install the Hik-Connect app. 2) Select your Region, press Login and then Register. Follow this process through as instructed by the app. 3) Once you have logged in press the + Icon in the top right corner, highlighted on the image below, and then select Scan QR Code.
How can I connect my DVR to my laptop without internet?
Firstly, go ahead and setup your DVR near your computer, close enough to connect to it by the ethernet cable. Inserting one end to the DVR and the other end to your computer. For the time being you will need to connect a monitor or TV to your DVR so that you can change the Network Settings to match your computers.
Does hikvision work without internet?
Though IP is an abbreviation for Internet Protocol, an IP camera system will work perfectly fine without an internet connection. You can view the cameras, record to a hard drive, and search through recorded footage using just a monitor and a mouse plugged directly into the NVR.
How to enable Hik Connect on a recorder?
Enabling Hik-Connect on the recorder GUI 3.0. 1) Right-click and select Menu and then browse to Configuration > Network > Platform Access. 2) Tick the Enable box. You will then be prompted to create a Verification Code, set this as something memorable, and please make a note of it as you will need it again shortly.
How to register a Hik Connect account?
You can consult this article on how to register a Hik-Connect account. 1) On your phone or tablet install the Hik-Connect app. 2) Select your Region, press Login, and then Register. Follow this process as instructed by the app. 3) Once you have logged in press the + icon in the top right corner, highlighted on the image below, ...
How to connect a DVR to a router?
Connect your NVR or DVR to your network by running an Ethernet cable from the LAN port on the recorder directly to your router. Install the Hik-Connect app on your phone or tablet (from App Store or Google Play store). The first step of this process is slightly different depending on which version of the Hikvision software is installed on your ...
How long does it take to set up a DVR?
The steps are easy and logical and the procedure can be finished in 5-10 minutes. Before you begin, make sure that your NVR or DVR is set up locally, that the system has been configured with a password and that your cameras are viewable (on the TV screen).
Hikvision: remote camera access – Teltonika Networks W
Hikvision: remote camera access. Language; Watch · Edit. A guide to using RUT routers in conjunction with Hikvision DS-2DC2332-I, a 3MP Outdoor Network …
How to configure port forwarding & remote viewing of your Camera
HIKVISION Quick Guide of Remote Monitoring via PC or Mobile Phone. 3 the 192.0.0.64 in the IE browser. Then you should modify the IP of network camera to …
Hikvision iVMS-4200 – Adding New NVR for Remote Acc
In order to remotely access a Hikvision NVR from a computer, you will require … You can add multiple camera systems to iVMS (e.g., you have multiple sites with …
How to access Hikvision DVR from mobile (step-by-step) – Learn
The steps to access a Hikvision DVR from a mobile are very simple. Just install the iVMS-4500 App in the mobile phone, click the Hik-connect …
How to connect NVR to network?
Connect your NVR to your network by running an ethernet cable from the LAN port on your NVR or DVR directly to your router. If you are using a Windows computer, install SADP from this page. If you are using an Apple computer, install it from here.
How to find serial number on a hik connect?
2) Click on the Add button in the top right corner and, in the window that pops up, enter the 9 digits from the Serial Number that you noted down earlier and press the Search button.
How to set up a NVR for remote viewing?
1. Understand Your Network. Setting up your NVR for remote viewing requires you to access your Local Area Network (LAN) from the Internet (a Wide Area Network). Your devices connect to the Internet through your gateway router, which is assigned two different IP addresses – one on the LAN, one on the WAN.
When will NVR be available for remote viewing?
October 21, 2020. Setting up your NVR for remote viewing is a critical part of surveillance today, allowing you to watch your security camera feeds while you’re out and about. Your security camera system is designed to protect your premises 24/7, especially when you’re not there. Even if you’ve got a video monitoring company helping out, ...
Is a WAN address static?
The WAN address can either be static (generally for large businesses) or dynamic for residential and small businesses. Dynamic addresses are rotated by Internet Service Providers for security purposes or power fluctuations.
Do you have to enter the same password for NVR?
The username and password will remain the same, but you won’t have to enter the ports for the local connection. Using a smartphone app only requires you to fill in the NVR’s credentials once, but you’ll have to set two IP addresses for your NVR.
How to change Hikvision port?
You can change these ports locally as well. Right-click with your mouse, go to the Main Menu, then login with your username and password. Navigate to the Configuration section and after that click the Network tab. On the top, you need to select the Ports tab.
When to use port forwarding on Hikvision?
Port forwarding should only be used when the devices need to be accessed via the internet. There are two ways to open up the ports for your Hikvision device. The first and the easy way is by using the UPnP function.
What is the port range of a NVR?
Never leave the default ports, especially if you have decided to expose your NVR on the internet. The port range can be anything between 1-65535.