These are the default ports on a Hikvision NVR or DVR:
- HTTP port: 80 (this is the port used to access the recorder locally or remotely via web browser)
- Server port: 8000 (this is the port used by the phone app)
- RTSP port: 554 (this is the port used for live streaming. Read more here .)
- HTTPS port: 443 (this is the HTTP port if you have installed an SSL Certificate on the recorder).
How to set up NVR remote access?
Step by Step Instructions
- Connect NVR to network with a CAT5 cable.
- Download and install ConfigTool from DahuaSecurity.com, under Support->Download Center->Software
- Run the ConfigTool.
- The ConfigTool should display your IP Camera. ...
- Configure Internet Explorer security settings to allow the plugs to work. ...
- Login with the default credentials: User Name: admin Passsword: admin
How to setup HIK connect on DVR and NVR?
How to Setup Hik-Connect P2P Service • Using the console of the NVR or DVR, select System Configuration from the Main Menu. • The system configuration menu is where to set the date and time, configure the network setting, change port numbers, enable Hik-connect P2P service, setup email, users accounts and more.
How to upgrade a Hikvision NVR or DVR locally?
To update firmware on the DVR / NVR:
- Download the correct firmware for the system to a formatted USB drive.
- Insert the USB drive into the USB port of the DVR / NVR.
- Right-click on the Live View to access the Quick Menu.
- Click Main Menu and then click the Setting icon ( ).
- Click Setting > Upgrade.
- Click Start.
How to access camera behind NVR?
- Open a web browser that is compatible with your recorder. ...
- Type the IP address for your NVR or DVR into the address bar of the web browser. ...
- As we mention above if you’re unsure what the IP address of your recorder is, check it out by navigating to the network settings menu. ...
- Login using the admin account. ...
See more
What ports need to be open for Hikvision NVR?
You will need to open up the following ports :HTTP Port = 80.Server Port = 8000.RTSP Port = 554.HTTPS Port = 443.
How do I access Hikvision NVR remotely?
Enable remote HTTP access, so that the router can be reached from a remote location. Specify an Access Point Name (APN) for the SIM card in use, so that the router will obtain a Public IP address. Configure a Port Forwarding rule that redirects all connections from one Port to the camera's IP address:Port.
What ports do NVR use?
Due to the default web port of the NVR is port 80, this is the common port for many device, in order to avoid the port conflict, we recommend change the web port of NVR (e.g., 8008, 8888.)
How do I setup port forwarding for Hikvision NVR?
How to: Configure Port Forwarding on a Hikvision RecorderLog in to your DVR as the admin (default password is 12345).Open the Main Menu, click the Configuration button, Network and then General.Tick the box which says DHCP.Click the Apply button in the bottom right of the screen, now close the menu.More items...•
How do I connect to NVR remotely?
There are 6 steps to setting up your NVR for remote viewing:Understand Your Network.Setup DDNS.Setup A Port Forward.Assign The DDNS Hostname To Your NVR.Set Two IP Addresses For Your NVR.Verify That Local Viewing and Remote Viewing Work.
What ports does Hikvision use?
*** Hikvision devices use the following 4 ports: 8000, 80, 554, 8200. Once you have accessed the router's web-interface successfully follow the next steps to guide yourself to the port forwarding option (normally NAT).
How many ports does an NVR have?
8 portsBut, while you are not necessarily limited by the number of ports on the back of the DVR, you are limited by the channels dictated by the NVR firmware; your NVR might have 8 ports but be able to accommodate 16 channels, simply recognizing the two multiple signals on a single cable as the two distinct security cameras ...
How can I access my CCTV remotely without a static IP?
Step1: Login Camera on Web Browser > Now Go to Config Tab > Network > Put HTTP Port and Server Port - By default HTTP Port 80 assign (i.e 81 and 6036)> Check mark on use the Following IP Address > Assign IP Address on Camera as given example > Apply.
How do I access my IP camera remotely?
How to view your IP camera remotely via a web browserFind your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.After you change the port, you will need to reboot the camera in order to save the changes.More items...•
What is port forwarding in NVR?
Port forwarding is essential to making your security DVR or NVR accessible from online using either your computer or mobile device. It is a configuration setting in your router that must be set properly in order to view your security camera system from the internet.
What protocol does Hikvision use?
Hikvision protocol is 8000 port and Onvif protocol is 80 port.
Is port 8000 Secure?
TCP Port 8000 Activity to the Internetedit TCP Port 8000 is commonly used for development environments of web server software. It generally should not be exposed directly to the Internet. If you are running software like this on the Internet, you should consider placing it behind a reverse proxy.
How do I access Hikvision NVR on my phone?
How to Use Hik-Connect on Mobile for both iOS and Android?Download the “Hik-Connect” app from the iOS app store or Google Play. How to Use Hik-Connect on Mobile (iOS and Android)Open the app. ... Now you have two options: either login your Hik-Connect account, or add your device to the Hik-Connect App directly.
How can I access Hikvision remotely from my computer?
Enabling Hik-Connect Service on WebOpen the web browser on your PC.Input the device IP address and press the Enter key on your keyboard.Input the device user name and the device password to login.Tap Configuration – Network – Advanced Settings – Platform Access to enter the Platform Access page.Check Enable.More items...
How can I view my CCTV from anywhere?
Install viewing software. The viewing software may be proprietary to your CCTV provider. The best CCTV providers have a smart app that you can install on any mobile device and then track it yourself. Companies like Pro-Vigil offer viewing software for free that you can download to your mobile devices.
How do I turn off Hikvision NVR remotely?
Log into the interface, right click, click Menu. In the bottom left you will see a small red power button. Press that and it will give you Shutdown/Restart options.
What ports does Hikvision use?
Hikvision cameras, DVRs and NVRs use ports 80, 443, 554, 10554 and 8000. Each one of these ports is related to a different type of service as described below: Those are the default ports for Hikvision DVR and NVR but you can change them. If you want to view the live video streaming from your camera using a web browser, for example, ...
What is the RTSP port for Hikvision?
Besides the fact, the 554 is the universal standard RTSP port, Hikvision recommends to use the port 10554 because some cell phone carriers block incoming data through port 554 to avoid high traffic from audio/video stream.
Can you see the 8000 port on Hikvision?
It's possible to see the other ports, including the 8000 which is use by the software. Remember that these default ports for Hikvision cameras and recorders can be changed according to your needs but you still need to follow some guidelines.
Can I use a web browser to log in to my IP camera?
You can use a web browser to log in to the IP camera, DVR or NVR and change the default port or you can use the SADP software to manage the devices. See below the example with the Hikvision DVR. This is the DVR I have in my office and I just changed the HTTP port from 80 to 8082 to have remote access via portforwarding.
When will Hikvision port forwarding be available?
Hikvision port forwarding (step-by-step) June 9, 2020. Hikvision No Comments. It's important to understand how the Hikvision port forwarding works so you can have access to the IP cameras, DVR and NVR remotely from the Internet.
Does Hikvision use ports?
Each device connected to a network and the Internet use ports for different types of services. The same is true or a Hikvision DVR as shown in the picture below.
What is Hikvision Pro series?
Based on deep learning technology, Hikvision Pro series NVRs with AcuSense are able to analyze and classify human and vehicle targets from video streams, as well as to enable efficient video searching by target type.
How accurate is NVR?
Embedded industry-leading Deep Learning algorithms, this series of NVR can boast up to 90 percent accuracy in false alarm reduction and intelligent facial recognition technology, human intervention can be reduced to the bare minimum.
How to connect to a DVR?
Step 1: Setting Up on Your LAN (Internal Network) 1 Log in to your DVR as the admin (default password is 12345). 2 Open the Main Menu, click the Configuration button, Network and then General. 3 Tick the box which says DHCP. 4 Click the Apply button in the bottom right of the screen, now close the menu. 5 Wait for 30 seconds, bring up the Main Menu, click the Maintenance button and then the Network Tab and take note of the IP Address. It will likely look similar to: “192.168.***.***” we will refer to this as IP Address 1. 6 Take note of the DefaultGateway. It will look similar to: “192.168.***.***”. We will refer to this as the IP Address 2. 7 Open Internet Explorer and enter IP Address 1 into the address bar. You may need to add your DVR as a Trusted Site in Internet Explorer. To do this:#N#– Press the Alt key on your keyboard.#N#– Click Tools -> Compatibility view settings.#N#– Add the address to this list#N#– Re-type IP Address 1 into the address bar of Internet Explorer. 8 Login to your DVR with your username (default is admin) and password (default is 12345). 9 Once you have logged in you will be presented screen which will allow to bring up the live camera view
What is the password for DVR?
Login to your DVR with your username (default is admin) and password (default is 12345).
How to add DVR to trusted site?
To do this: – Press the Alt key on your keyboard. – Click Tools -> Compatibility view settings. – Re-type IP Address 1 into the address bar of Internet Explorer. Login to your DVR with your username (default is admin) and password (default is 12345).
How to check if port forwarding is working?
Open an Internet browser and visit the website (Fig. 14): http://www.yougetsignal.com/tools/open-ports/ The open port checker is a tool you can use to check your external IP address and detect open ports on your connection. This tool is useful for finding out if your port forwarding is setup correctly or if your server applications are being blocked by a firewall.
How to check IP address availability?
a)You can check the IP address availability by performing the “Ping” command (Fig. 2). In order to do that you need to type ping 192.168.1.4 at the command promptwindow.
What does it mean to have bellow ports forwarded?
By enabling bellow ports to be forwarded to a device’s IP address on your local network router it will provide users with remote access to the device from the internet. For more information about Port Forwarding please refer to http://portforward.com/
Where is the ipconfig command?
b) Windows NT, 2000, and XP users: Locate the Windows icon in the bottom left corner of the task bar. Click Run. Type cmdor commandand press enter. Following the available prompt, type ipconfigand press Enter.
Can you enable DHCP in DVR?
a) You can enable the DHCP checkbox in the DVR Network Configuration interface:
Can I remotely access my Hikvision device?
The following guide will guide you through the necessary steps to remotely access your Hikvision device with another PC, Laptop, Tablet, Smartphone or iPhone. Before proceed please connect your device to your router and obtain a computer that is already connected to the same router or LAN. Also make sure that your computer can access the internet. After properly port-forwarding (also called port-mapping) your router you will be able to access your device by using an internet browser, such us IE, Chrome, Firefox or Safari and/or our client software iVMS4200.
Install the App on your mobile phone
OK, now that you have the basic information about the DVR IP and ports you are ready to download the App for remote DVR access.
Open the iVMS-4500 App and create an account
Open the iVMS-4500 App and click on the button to open the left menu and then click on the button Hik-Connect. (see the picture below).
Add the DVR to the iVMS-4500 App
The App opens the camera to scan the QR code that is located in your DVR.
Understanding how the DVR must be connected
OK, now that you have the solution to connect your Hikvision DVR using the mobile phone, perhaps you want to understand a little bit more about the connection and configuration of the DVR.
1. DVR local connection and configuration
Take a look at the diagram below to better understand how you need to connect your DVR in the network. The connection is very simple.
2. DVR and mobile App remote configuration
This is the part where you install and configure the iVMS-4500 App for remote access to the Hikvision DVR and this step is on the top of this article.
How does NVR work?
The NVR assigns the cameras an IP address without using DHCP, using a lower level protocol. If you your DHCP server assigned them an IP address, then it will leave them alone. You can manually add the camera using the IP address that your router assigned (set a reserved IP address in your router) in the NVR.
What is the DHCP address for a camera?
The cameras are set to DHCP before I connect them to the NVR, when they are connected to the NVR they are given a 192.168.1.x address, if I plug the camera into my main router then they get a 192.168.0.x
What happens if you assign a DHCP server an IP address?
If you your DHCP server assigned them an IP address, then it will leave them alone.
Can cameras be accessible by NIC?
The point is that cameras will not be accessible by using NIC which is being used to connect NVR with home network
Does the NVR have a DHCP port?
Unfortunately the PoE ports on the back of the NVR are auto assigned their own IP from the NVR itself, not the main router DHCP.