How to set up Hik-Connect for remote camera viewing Connect your NVR or DVR to your network by running an Ethernet cable from the LAN port on the recorder directly to your router. Install the Hik-Connect app on your phone or tablet (from App Store or Google Play store).
Full Answer
How to access an IP camera connected to Hikvision Poe NVR?
How to access an IP camera connected to Hikvision PoE NVR Step 1. The first step consists of finding the IP address of your NVR. You can find it via the NVR’s local interface on the Network settings (as shown on the screenshot below) or you install the SADP tool on your laptop and the tool will show the current IP address of the NVR.
How do I remotely access my Hikvision device?
Introduction The following guide will guide you through the necessary steps to remotely access your Hikvision device with another PC, Laptop, Tablet, Smartphone or iPhone. Before proceed please connect your device to your router and obtain a computer that is already connected to the same router or LAN.
How to enable virtual host feature on Hikvision NVR?
In this step you need to enable the Virtual Host feature on the Hikvision NVR. Navigate to Configuration > Network > Advanced Settings and select the Other tab. Here you have to tick the Enable Virtual Host box.
Can I install standard firmware on the Hangzhou Hikvision digital model?
© Hangzhou Hikvision Digital Technology Co., Ltd. All Rights Reserved. Privacy Policy Web Developmentby 8P-Design IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system.
How do I access Hikvision NVR from the Internet?
Enable remote HTTP access, so that the router can be reached from a remote location. Specify an Access Point Name (APN) for the SIM card in use, so that the router will obtain a Public IP address. Configure a Port Forwarding rule that redirects all connections from one Port to the camera's IP address:Port.
How do I access HIK remotely?
Remotely Configure DeviceEdit Information of Cameras Linked to Added Device.Set Video and Image Encryption.Set DDNS.Change Device's Verification Code.Set Volume for Video Intercom.Use Mobile Client as Device's Remote Controller.Remotely Configure Device. View and Edit Basic Information. Set Recording Schedule.
How can I read Hikvision NVR remotely on my PC?
Enabling Hik-Connect On your computer open SADP Tool. ... Select your NVR or DVR from the list by ticking the box to the left of it. ... When you select the device you will see a panel of information on the right that looks like the one in the image above.More items...•
Can Hikvision cameras be activated via web browser?
Use web browser to activate the camera. For the camera with the DHCP enabled by default, use SADP software or PC client to activate the camera.
How do I access NVR on my computer?
Plug one end of the included HDMI cable into the HDMI port on the back of the NVR. Plug the other end of the HDMI cable into the back of your TV or monitor. NOTE: To view cameras, TV/Monitor must be tuned to the same Input the HDMI is plugged into. Plug the USB mouse into the USB port on the back of the NVR.
How do I access Hikvision NVR on my phone?
How to Use Hik-Connect on Mobile for both iOS and Android?Download the “Hik-Connect” app from the iOS app store or Google Play. How to Use Hik-Connect on Mobile (iOS and Android)Open the app. ... Now you have two options: either login your Hik-Connect account, or add your device to the Hik-Connect App directly.
How do I find my Hikvision NVR IP address?
Go to Configuration > System > Camera Management > Click on the blue link next to the camera you wish to log into. There you have it – you're now logged into the camera and ready to perform actions on the camera. Load up SADP – you should see all the IP addresses of the cams listed.
What is the default IP address for Hikvision NVR?
192.168.1.108A. Our NVRs ship with a default IP address - 192.168. 1.108. You will be required to login with the username and password that is set on your NVR.
Is there a Hikvision app for PC?
iVMS-4200 for Windows - Free Client Software for Hikvision Devices. The Windows-based iVMS-4200 is a versatile client software application for Hikvision video surveillance, access control and video intercom systems.
How do I view Hikvision in Chrome?
To view your device using the Chrome browser, you must add the IE tab extension to Google Chrome. The IE tab emulates the IE rendering engine which allows the use of Java, Silver Light, and Active X controls that work with Hikvision devices.
Which browser works with Hikvision?
Opera. If you're looking for a modern, sleek and performant browser, look no further than Opera. You will have no problems at all running the latest versions of Hikvision firmware-based devices, since they do not require any plugins.
Do Hikvision cameras need Internet?
No. Despite the name “Internet Protocol,” IP security cameras do not require an outside connection to the Internet.
What is HIK-Connect server address?
To do this we will navigate using the web-based GUI to Configuration >> Network >> Advanced Settings >> Platform Access and ensure that it is enabled and the “Platform Access Mode” is set to Hik-Connect, we will then ensure that the “Server Address” is 'dev.eu.hik-connect.com' and press “Save”.
Why is my HIK-connect offline on my phone?
Make sure the device has been connected to the Internet and it can connect to the Hik-Connect Server. a) Go to device to see whether the IP parameters belong to LAN. The IP address, subnet mask and default gateway need to be set correctly. Path: Configuration-Network-Basic Settings-TCP/IP.
Is HIK-connect free?
The Hik-Connect app is a free surveillance system application developed by HIKVISION HQ. Designed for the end-users, this utility software allows you to access your cameras remotely and from your mobile phone.
How to check IP address availability?
a)You can check the IP address availability by performing the “Ping” command (Fig. 2). In order to do that you need to type ping 192.168.1.4 at the command promptwindow.
Where is the ipconfig command?
b) Windows NT, 2000, and XP users: Locate the Windows icon in the bottom left corner of the task bar. Click Run. Type cmdor commandand press enter. Following the available prompt, type ipconfigand press Enter.
Can you enable DHCP in DVR?
a) You can enable the DHCP checkbox in the DVR Network Configuration interface:
Can I remotely access my Hikvision device?
The following guide will guide you through the necessary steps to remotely access your Hikvision device with another PC, Laptop, Tablet, Smartphone or iPhone. Before proceed please connect your device to your router and obtain a computer that is already connected to the same router or LAN. Also make sure that your computer can access the internet. After properly port-forwarding (also called port-mapping) your router you will be able to access your device by using an internet browser, such us IE, Chrome, Firefox or Safari and/or our client software iVMS4200.
How to access Hikvision camera?
You can access your Hikvision IP camera via a web browser, software, smartphone, or even via the cloud. It's just a question of having the right configuration.
How long does it take to connect a Hikvision camera to the cloud?
You can have your Hikvision camera connected to a cloud in less than 5 minutes.
How to enable network access?
The process is straightforward, just open the network menu, go to the advanced settings tab, click the "Platform Access" option and click "Enable".
Where does my camera get its IP address?
Your camera gets the IP from the router , and then you can open a web browser and type the IP address to have access to the camera, as shown in the picture below.
Can you use Hikvision camera on the internet?
You can use the Hik-connect service to have your Hikvision camera available via the Internet so you don't need to deal with the port forwarding configuration.
How to enable Hik Connect on a recorder?
Enabling Hik-Connect on the recorder GUI 3.0. 1) Right-click and select Menu and then browse to Configuration > Network > Platform Access. 2) Tick the Enable box. You will then be prompted to create a Verification Code, set this as something memorable, and please make a note of it as you will need it again shortly.
How long does it take to set up a Hikvision CCTV system?
The steps are easy and logical and the procedure can be finished in 5-10 minutes.
How to register a Hik Connect account?
You can consult this article on how to register a Hik-Connect account. 1) On your phone or tablet install the Hik-Connect app. 2) Select your Region, press Login, and then Register. Follow this process as instructed by the app. 3) Once you have logged in press the + icon in the top right corner, highlighted on the image below, ...
How to connect a DVR to a router?
Connect your NVR or DVR to your network by running an Ethernet cable from the LAN port on the recorder directly to your router. Install the Hik-Connect app on your phone or tablet (from App Store or Google Play store). The first step of this process is slightly different depending on which version of the Hikvision software is installed on your ...
How to find the IP address of a NVR?
The first step consists of finding the IP address of your NVR. You can find it via the NVR’s local interface on the Network settings (as shown on the screenshot below) or you install the SADP tool on your laptop and the tool will show the current IP address of the NVR.
How to access IP camera?
One way to access those IP cameras is by unplugging them, connecting the camera to a external switch then modifying the IP address via the laptop and accessing it via the web browser. As you can see, this method takes a lot of work and imagine if you have a lot of cameras that need to have the settings adjusted.
Where are IP cameras plugged in?
The IP cameras are plugged in straight to a PoE NVR. As you can see in the next diagram, in this kind of setup the IP cameras are plugged in directly at the back of the PoE NVR. So, the cameras are connected straight to the PoE NVR and the NVR itself is connected to the router where the laptop/computer is getting the internet from.
Can a laptop see a NVR?
In other words, the laptop/computer can see the NVR since they’re on the same network but can’t see the camera since technically they’re located on a different and separate network. Of course there’s a way to access the camera and that’s by using the Virtual Host feature that most of the NVRs support.
Can an IP camera be connected to an external switch?
The IP cameras are connected to an external switch. As shown in the diagram below, the IP cameras are connected to an external (PoE) switch and the NVR is connected to the same switch (or straight to the router). In this case all the devices are in the same network and the NVR can see the IP cameras via the network.
Can you adjust the camera settings on a NVR?
While you can adjust many settings on the camera by using the NVR’s interface, there are certain settings that can be adjusted only by accessing the camera directly. In a few words, when going to the camera directly you have control over all the settings of that camera.
