What are the features of the HITRON cgnm-2250?
Page 121 Hitron CGNM-2250 User’s Guide rule, port forwarding overview, GUI SCDMA scheduled website blocking security, wireless password service filter password and username service set PBC configuration settings backup and restore PIN configuration SSID ping Status port forwarding status port triggering status, cable connection...
How do I add or edit a trust PC in HITRON cgnm-2250?
Hitron CGNM-2250 User’s Guide 7.3.2 Adding or Editing a Trust PC List To add a new trust PC to the list, click Add Trust Device in the Security > Service Filter screen. To edit an existing trust PC in the list, locate the device in the Security > Service Filter screen and click its Manage button.
How do I enable IP Passthrough on my HITRON modem?
IP Passthrough can be set to the MAC address of a specific device on your network or by assigning the passthrough to a specific ethernet port on the back of your Hitron (possible ports: 1-4). Both options are described below and are enabled via the web user interface for your Hitron modem.
Does the cgnm-2250 have a help button?
: each screen in the CGNM-2250’s Graphical User Interface (GUI) contains a Help button. Click this button to see additional information about configuring the screen. Document Conventions This User’s Guide uses various typographic conventions and styles to indicate content type:
How to add a managed device to Hitron CGNM-2250?
How does a Hitron CGNM-2250 work?
What is the success screen on a Hitron CGNM-2250?
What is CGNM 2250 routing mode?
What is the setup wizard on a CGNM-2250?
What is the default IP address for CGNM-2250?
How to allow all devices to connect to CGNM-2250?
See 4 more
About this website
How do I access my Hitron router?
Login InstructionsIn the address bar, type in the following: 192.168. 0.1 and press the enter key on your keyboard.You will be presented with a Hitron login page.Login with your credentials: Hitron CGNM-2250. Username: cusadmin. ... Select the Login button.
How do I connect to CGNM-2250?
Type 192.168. 0.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Hitron CGNM-2250 is cusadmin.
Is the Hitron CGNM-2250 a modem and router?
CGNM-2250 Cable Modem Router - Hitron Americas.
How do you do a Hitron bridge mode?
Hitron CGN3/CGN3U After login into the modem's interface, select the "Basic" option from the black bar on the top. Select the "Gateway Function" tab. Disable the "Residential Gateway Function", then select "Save Changes". Click "Ok" on the message that will appears; The modem will now reboot in bridge mode.
How do I find my Hitron username and password?
Enter the following default settings to access the modem settings and select Login: Username: cusadmin. Password:password(or your current WiFi password) If you can't log in, see the links within the note at the bottom of this page.
What does the WPS button do?
Wi-Fi® Protected Setup (WPS) is a built-in feature of many routers that make it easier to connect Wi-Fi enabled devices to a secure wireless network. This information is provided to help connect your TV, Blu-ray Disc™ player, or other supported home video products to a wireless network using WPS.
Do I need a router with a Hitron modem?
Do Cable modems need a router? While your cable modem doesn't need a router to deliver an Internet connection, the addition of a router offers the benefits of a WiFi connection and adds flexibility to your home network. Your home network is only as good as the hardware you use.
Where is the security key on a Hitron router?
Connecting your device to WiFi If you are connecting your devices via WiFi, start by locating the SSID (network name) and WiFi Key (password) for your Hitron modem and connect to that network on your device. Your SSID and WiFi Security Key can be found printed on the white sticker located on the modem.
Is Hitron router good?
Hitron is well-known for their high-quality networking equipment, such as their MoCa 2.5 network adapter. So we wanted to see if the CODA modem is up to the same standard of the rest of their devices. It's extremely fast, with support for up to 10Gbps of traffic.
What is bridge mode on a modem?
Configuring a High-Speed Internet modem in Bridge Mode allows your PC, separate router or other device to establish a connection to the Internet. The device usually connects directly behind the High-Speed Internet modem and is configured with the PPPoE (Point-to-Point Protocol over Ethernet) username and password.
How do I set up bridge mode?
How to Set Up Bridge ModeOpen a web browser from the device that's connected to the network of the router that will run in bridge mode.On the login screen, enter the router's username and password.Head over to Settings > Advanced Settings > Advanced Setup > Wireless Bridge.Click the Enable Bridge Mode checkbox.More items...•
How do I get my hitron modem out of bridge mode?
To kick the modem back into Gateway mode, thru the connected router, log into the modem using 192.168. 100.1, navigate to the BASIC .... GATEWAY FUNCTION and enable the Residential Gateway Function. Save the changes to initiate the reboot back into Gateway mode. Keep in mind the non-response issue with version 7.
How do I bridge my Rogers gateway?
If you see this, try rebooting your third-party WiFi network solution and making sure it's still connected to the gateway first.On your computer or device, open an internet browser.Enter 10.0. 0.1 and hit Enter.Sign in with the following credentials: ... Select Gateway.Select At a Glance.Next to Bridge Mode:
What lights should be on hitron modem?
LED: Upstream. Green, flashing: The router is searching for a downstream frequency on the CABLE connection. Green, steady: The router has successfully located and locked onto an upstream frequency on the CABLE connection. Blue: The router is engaged in channel bonding on the upstream connection.
What is bridge mode Rogers?
Bridging your modem allows you to use a third-party router and disables the modem's Wi-Fi capability.
Should I disable residential gateway function?
Disable the residential gateway, or else you'll have double NAT which means useless processing on the modem and possibly port forwarding issues. You can still access the modem afterwards using http://192.168.100.1 if you want to reboot it remotely inside your LAN.
Hitron CGNM-2250 Quick User Guide - GDI Technology, Inc.
Connect options WIRELESS DEVICES MoCA Devices CABLE COMPUTER POWER ADAPTOR LED Display Blinking: On: No AC power, device is running on battery.
Hitron CGNM-2250 updated to 4.5.11.16b1 - Shaw Support
Solved: I noticed that the firmware on my Hitron CGNM-2250 modem was recently upgraded to version 4.5.11.16b1. Are there release notes available? Any new
How to add a managed device to Hitron CGNM-2250?
Hitron CGNM-2250 User’s Guide 5.3.1 Adding or Editing a Managed Device To add a new managed device, click Add Managed Device in the Wireless > Access Control screen. To edit an existing managed device, locate the device in the Wireless > Access Control screen and click its Manage button.
How does a Hitron CGNM-2250 work?
Hitron CGNM-2250 User’s Guide Table 20: The Basic: Port Triggering Screen (continued) Twoway Status Usually a port triggering rule works for two IP addresses; when a rule is enabled, other IPs will also be allowed to use the rule as a trigger.
What is the success screen on a Hitron CGNM-2250?
Hitron CGNM-2250 User’s Guide Success displays when the CGNM-2250 has completed a connection step. The DOCSIS WAN Screen Use this screen to discover information about: The nature of the upstream and downstream connection between the CGNM- 2250 and the device to which it is connected through the CABLE interface.
What is CGNM 2250 routing mode?
3.1.6 Routing Mode When your CGNM-2250 is in routing mode, it acts as a gateway for computers on the LAN to access the Internet. The service provider assigns an IP address to the CGNM-2250 on the WAN, and all traffic for LAN computers is sent to that IP address.
What is the setup wizard on a CGNM-2250?
The Summary Screen on page Setup Wizard Overview Your CGNM-2250 possess a setup wizard that allows you to rapidly configure its most important settings, including password and wireless settings. The Setup Wizard Screen This section describes the CGNM-2250’s Setup Wizard Screen.
What is the default IP address for CGNM-2250?
192.168.0.254 (default). In the Subnet mask field, enter 255.255.255.0 (default). NOTE: If your CGNM-2250 is not using the default IP address, enter an IP address and subnet mask that places your computer in the same subnet as the CGNM-2250. Click OK. The Internet Protocol (TCP/IP) window closes. In the Local Area Connection Properties window, click OK.
How to allow all devices to connect to CGNM-2250?
Use these buttons to control the action to be taken for the devices listed: Select Allow All to ignore the Managed Devices list and let all devices connect to the CGNM-2250. Select Allow to permit only devices you added to the Managed Devices list to access the CGNM- 2250 and the network.
What is a hitron router?
HITRON is a Private Router for use only inside of a Private Network. This device could be related with an IP Address, and other many devices. You are trying to find the login for your router? You are in the right place.
What to do if Hitron doesn't work?
If it doesn't work, then HITRON is not your Router Brand. Once you know your router's Brand, introduce corresponding IP Address in into your Browser Address Bar. You'll be directed to the user login panel. There introduce your router user and password.
What is port mode on a Hitron?
Port Mode: This mode allows you to select the specific ethernet port (1-4) on the back of the Hitron that will provide the external IP address (note: The Hitron ports are not numbered but with the modem in the standing position, the port numbers are sequential with port #1 just below the reset hole and port #4 closest to the coaxial cable connection).
What is IP passthrough?
Whether you're looking to use a third-party router or troubleshoot possible connectivity issues, IP Passthrough allows you to assign a public IP address to a device connected to your Hitron modem, effectively bypassing the Hitron's internal router. Learn how to use IP Passthrough on your Hitron GCNM-2250 modem.
Can you use a second IP address on Hitron?
Once you have enabled IP Passthrough, the device that receives the public IP address will no longer be able to access the Hitron's user interface (as described below). Please contact customer support to confirm or arrange for your free IP address: Shaw.ca/ContactUs. Once you have confirmed the availability of a second IP address, please follow the steps outlined below.
Can Hitron be used as a router?
As your Hitron will continue to operate its DHCP service, if you intend to use IP Passthrough for a third-party router, it is recommended that you move all of your local connections (both wired and wireless) to the third-party device. This would allow the Hitron to operate only as a modem and your third-party router to manage all ...
What is the IP address of a CGNM-2250?
If your CGNM-2250 is using the default IP address, you should set your computer’s IP address to be between 192.168.0.2 and 192.168.0.254.
What is a CGNM-2250?
Your CGNM-2250 is a NAT-capable cable modem and wireless access point that allows you to connect your computers, wireless devices, and other network devices to one another, and to the Internet via the cable connection.
How to reset a CGNM-2250?
Reset Use this button to reboot or reset your CGNM-2250. Press the button and hold it for less than five seconds to reboot the CGNM-2250. The CGNM-2250 restarts, using your existing settings. Press the button and hold it for more than five seconds to delete all user-configured settings and restart the CGNM-2250 using its factory default settings. See Factory Default Resetting the CGNM- 2250 on page 24 for more information on resetting the CGNM-2250. NOTE: Unless you previously backed-up the CGNM- 2250’s configuration settings prior to resetting the CGNM-2250, the settings cannot be recovered.
Can you connect a CGNM-2250 to a LAN?
However, it is strongly recommended that you configure the CGNM-2250 via a wired connection on the LAN.
Can CGNM-2250 be mounted vertically?
The CGNM-2250 must be placed vertically on its stand, should not be positioned in either wall-mount or horizontal.
Does the CGNM-2250 have a DHCP server?
NOTE: See IP Addresses and Subnets on page 33 for background information. The CGNM-2250 has a built-in DHCP server that, when active, assigns IP addresses to computers on the LAN. When the DHCP server is active, you can get an IP address automatically. The DHCP server is active by default.
How to add a managed device to Hitron CGNM-2250?
Hitron CGNM-2250 User’s Guide 5.3.1 Adding or Editing a Managed Device To add a new managed device, click Add Managed Device in the Wireless > Access Control screen. To edit an existing managed device, locate the device in the Wireless > Access Control screen and click its Manage button.
How does a Hitron CGNM-2250 work?
Hitron CGNM-2250 User’s Guide Table 20: The Basic: Port Triggering Screen (continued) Twoway Status Usually a port triggering rule works for two IP addresses; when a rule is enabled, other IPs will also be allowed to use the rule as a trigger.
What is the success screen on a Hitron CGNM-2250?
Hitron CGNM-2250 User’s Guide Success displays when the CGNM-2250 has completed a connection step. The DOCSIS WAN Screen Use this screen to discover information about: The nature of the upstream and downstream connection between the CGNM- 2250 and the device to which it is connected through the CABLE interface.
What is CGNM 2250 routing mode?
3.1.6 Routing Mode When your CGNM-2250 is in routing mode, it acts as a gateway for computers on the LAN to access the Internet. The service provider assigns an IP address to the CGNM-2250 on the WAN, and all traffic for LAN computers is sent to that IP address.
What is the setup wizard on a CGNM-2250?
The Summary Screen on page Setup Wizard Overview Your CGNM-2250 possess a setup wizard that allows you to rapidly configure its most important settings, including password and wireless settings. The Setup Wizard Screen This section describes the CGNM-2250’s Setup Wizard Screen.
What is the default IP address for CGNM-2250?
192.168.0.254 (default). In the Subnet mask field, enter 255.255.255.0 (default). NOTE: If your CGNM-2250 is not using the default IP address, enter an IP address and subnet mask that places your computer in the same subnet as the CGNM-2250. Click OK. The Internet Protocol (TCP/IP) window closes. In the Local Area Connection Properties window, click OK.
How to allow all devices to connect to CGNM-2250?
Use these buttons to control the action to be taken for the devices listed: Select Allow All to ignore the Managed Devices list and let all devices connect to the CGNM-2250. Select Allow to permit only devices you added to the Managed Devices list to access the CGNM- 2250 and the network.
