how do i configure a cirouter for remote access

To install the IP-HTTPS certificate from an internal CA

1. On the Remote Access server: On the Start screen, type mmc.exe, and then press ENTER.
2. In the MMC console, on the File menu, click Add/Remove Snap-in.
3. In the Add or Remove Snap-ins dialog box, click Certificates, click Add, click Computer account, click Next, click Local...
4. In the console tree of the Certificates snap-in, open Certificates (Local Computer)PersonalCertificates.
5. Right-click Certificates, point to All Tasks, click Request New Certificate, and then...

Full Answer

How to access router remotely?

How to Access Router Remotely Part 1: Turn On remote sharing Turning on remote sharing on the router is easy. All you need to do is type the router IP or default gateway address in the web browser. Next, enter your username and password. Now, once you are in the router’s web portal, look for the Remote Managementoption.

How to set up a routing and remote access server?

1 Click Start, point to Administrative Tools, and then click Routing and Remote Access. 2 In the left pane of the console, click the server that matches the local server name. ... 3 Right-click the server, and then click Configure and Enable Routing and Remote Access to start the Routing and Remote Access Server Setup Wizard. ... More items...

How to access your router from inside the network?

Accessing your home router from inside the network is easy. Simply type in your router’s IP address (usually 192.168.1.1 or 192.168.0.1) in the web browser. But, how about accessing your router remotely? Now, before we come to that, let’s take a look at some of the reason, why you may want to do so.

How to turn on remote sharing on the router?

Turning on remote sharing on the router is easy. All you need to do is type the router IP or default gateway address in the web browser. Next, enter your username and password. Now, once you are in the router’s web portal, look for the Remote Managementoption.

What certificate is needed for remote access?

Remote Access requires an IP-HTTPS certificate to authenticate IP-HTTPS connections to the Remote Access server. There are three certificate options for the IP-HTTPS certificate:

When is a website created for remote access?

If the network location server website is located on the Remote Access server, a website will be created automatically when you configure Remote Access and it is bound to the server certificate that you provide.

How to join a remote server to a domain?

To join the Remote Access server to a domain. In Server Manager, click Local Server. In the details pane, click the link next to Computer name. In the System Properties dialog box, click the Computer Name tab, and then click Change.

How many Group Policy Objects are required for remote access?

To deploy Remote Access, you require a minimum of two Group Policy Objects. One Group Policy Object contains settings for the Remote Access server, and one contains settings for DirectAccess client computers. When you configure Remote Access, the wizard automatically creates the required Group Policy Objects.

What domain is Remote Access Server?

The Remote Access server and all DirectAccess client computers must be joined to an Active Directory domain . DirectAccess client computers must be a member of one of the following domain types:

When you use an internal CA to issue certificates, must you configure certificate templates for the IP-HTTPS certificate and?

When you use an internal CA to issue certificates, you must configure certificate templates for the IP-HTTPS certificate and the network location server website certificate.

Can you use Kerberos authentication on Remote Access Server 2012?

With Remote Access in Windows Server 2012 , you to choose between using certificates for computer authentication or using a built-in Kerberos authentication that uses user names and passwords. You must also configure an IP-HTTPS certificate on the Remote Access server. This section explains how to configure these certificates.

How to enable remote access to a server?

Right-click the server, and then click Configure and Enable Routing and Remote Accessto start the Routing and Remote Access Server Setup Wizard. Click Next.

How to reconfigure a server?

To reconfigure the server, you must first disable Routing and Remote Access. You may right-click the server, and then click Disable Routing and Remote Access. Click Yes when it is prompted with an informational message.

How to connect to a dial up network?

If they are, see your product documentation to complete these steps. Click Start, click Control Panel, and then double-click Network Connections. Under Network Tasks, click Create a new connection, and then click Next. Click Connect to the network at my workplace to create the dial-up connection, and then click Next.

How to create a group VPN?

Create a group that contains members who are permitted to create VPN connections. Click Start, point to Administrative Tools, and then click Routing and Remote Access. In the console tree, expand Routing and Remote Access, expand the server name, and then click Remote Access Policies.

What is enable secret?

The command enable secret sets a privilege mode password and stores it in an encrypted format so that it isn’t visible when viewing the running configuration. If you already have a privilege mode password set ignore the command. Replace the word password with your strong password.

Can Cisco routers telnet?

Assuming you’ve configured the interface IP address settings properly just entering the following commands will configure your cisco router for telnet access.

How to access router?

To access the Router, you should enter your Router's WAN IP address into your browser's address (in IE) or location (in Netscape) box and the custom port number. For example, if your Router's WAN address is 202.96.12.8 and you use port number 8080, enter http://202.96.12.8:8080 in your browser. You will be asked for the Router's password.

What does it mean to type a specific public IP address for remote management?

Type a specific Public IP address for the Remote Management IP Address means that you can only connect to this device remotely from a computer which is using this specific IP address.

Where is the LAN IP?

The LAN IP is vary by model. Please find it on the bottom label of the product.

What happens when a remote workstation is supplied with a password?

Once the proper session password is supplied, the remote workstation’s desktop appears on the local system.

How to set password for tightvnc?

Configure a password for TightVNC sessions. You can enter the password by double-clicking the VNC icon from within the Windows System Tray and specifying the password in the Incoming Connections section of the Current User Properties dialog box ( Figure B ).

How to install tightvnc?

To install TightVNC on the workstation or server you wish to access remotely, begin by downloading the self-installing TightVNC package. Once you have the installation file ready (the current version at the time of this writing is tightvnc-1.2.9-setup.exe ), follow these steps: 1 Double-click the executable file. The Welcome To TheTightVNC Setup Wizard will appear. Click Next. 2 Review the terms of the GNU General Public License, then click Next to acknowledge your acceptance of those terms. 3 Specify the location where you wish to place the application's files and then click Next. 4 Specify whether you wish to perform a full installation, a compact installation, or a custom installation. In this example, we'll perform a full installation by accepting the default settings and clicking Next. 5 Specify whether the Setup program should create a Start Menu folder and the name you wish to use for the folder and then click Next. 6 Configure additional settings. By default .vnc files are associated with TightVNC Viewer. If you want the system to serve as a VNC server, or host system, check the box for Register TightVNC Server as a system service. Then, click Next. The Ready To Install Screen will appear ( Figure A ).

How to disable empty passwords in WinVNC?

Specify additional settings, such as whether you wish to disable the use of empty passwords, enable loopback connections, and log session information to WinVNC logs, by clicking the Advanced button in the WinVNC: Current User Properties dialog box. Once you’ve configured settings as you wish, click Apply, then click OK to close all open windows ( Figure C ).

How to open tightvnc viewer?

Open a TightVNC Viewer on the local system by clicking Start | All Programs | Tight VNC | TightVNC Viewer. The Connection Details window will appear ( Figure D ). Enter the name of the remote VNC server to which you wish to connect. If you’ve changed the default port, you can specify the new port using this format: 192.168.1.1:9500.

Where is Remote Management on Netgear router?

Some routers called it Remote Access and it’s usually found under Advanced Settings. On Netgear router, you can find this option under Settings > Remote Management.

How to share a router?

Part 1: Turn On remote sharing. Turning on remote sharing on the router is easy. All you need to do is type the router IP or default gateway address in the web browser. Next, enter your username and password. Now, once you are in the router’s web portal, look for the Remote Management option.

How to find which DNS service to choose?

The best way to find, which service to choose, is by checking which service is supported on your router So follow these steps. 1. Login to your router and look for an option that says Dynamic DNS. If it’s not there, then you can download IP updater software from any Dynamic DNS provider.

What is the IP address of a router?

8080. So, if your public IP address is 74.12.168.14, then you’ll have to type 74.12.168.14:8080 on the web browser. 1.

Can I connect an external hard drive to my router?

And finally, you can connect an external hard drive to your router and access it from anywhere.

Can I access my DDNS from my router?

So now that you have set up DDNS and remote access on your router, you can access it from anywhere via the Internet. In case you have an old router here are some tips on how to boost network on your old Wi-Fi