What to do if Remote Access is lost on the Wemo device
- Once prompted, tap Delete. The app should now be uninstalled from your device.
- Go to Settings > Wi-Fi. Make sure the Wi-Fi is set to the ON position.
- Download the Wemo App from the App Store®. Reinstall it to your mobile device by tapping GET. Wait for the installation to finish.
- Once it is installed, launch the Wemo App again.
- If prompted, tap OK to proceed. Wait for the Wemo App to locate your Wemo devices.
- Turn all your Wemo devices ON and then OFF using the Wemo App.
- Wait for 30 seconds. Close the Wemo App to make sure it's not running in the background.
- Go back to Settings > Wi-Fi. Disable and re-enable the Wi-Fi by toggling the button to the left and then to the right.
- Test Remote Access. QUICK TIP: If you had to do steps 2 or 3 and you use the If This Then That (IFTTT) integration service, you will ...
How do I uninstall the Wemo App?
Step 1: Tap and hold the Wemo App until it shakes. Tap the x symbol on the top-left corner of the app to delete. Step 2: Once prompted, tap Delete. The app should now be uninstalled from your device. Step 3: Go to Settings > Wi-Fi. Make sure the Wi-Fi is set to the ON position. Step 4: Download the Wemo App from the App Store®.
Why can’t I enable remote access for my Wemo device?
Here are some reasons why you can’t enable Remote Access for your Wemo device: 1. The Wemo device is not set up properly If not all of your devices are showing up in the Wemo App, unplug the ones that are not appearing and do a factory restore of your devices one at a time.
Can I control multiple Wemo Wi-Fi devices from my mobile device?
The Wemo App on your mobile device is synched to only one Wemo Wi-Fi. Currently, the Wemo App only supports the control of a single Wemo Wi-Fi at a time. If you used your device to set up Wemo Wi-Fi in multiple locations, you will experience difficulties with remote access.
Why is my Wemo App not working?
TIP 2: Make sure that your internet connection is working properly. Internet connection problems will affect the Wemo App's ability to function. It is recommended to check if other devices that are connected to your modem or router are able to access the internet.
How do I delete a Wemo device from the app?
Step 3: Tap and hold down the Wemo Bridge or Wemo Mini tile. Step 4: Tap Details. Step 5: Scroll to the bottom and tap Remove Bridge from Home or Remove Accessory for the Wemo Mini.
How do I delete my Wemo account?
NOTE: If you are using an Android™ device, tap on the gear icon located at the upper-left corner of the Wemo App. Step 3: Under My Account, tap the account that is currently logged in. Step 4: Tap on Close Account.
How do I reset my Wemo to factory settings?
Step 1: Launch the Wemo app. Step 2: Tap Edit. Step 3: Tap the arrow next to the Wemo device name you want to reset. Step 4: Tap Reset Options.
How do I connect my Wemo remote?
Once you download the Wemo apps and you Wemo devices ready (LED Indicator flashing blue and orange), you can connect it to Wemo SSID, open the Wemo apps and follow the setup instruction. Once the setup is completed, you may be able to control you Wemo devices using your mobile apps.
How do I reset my wemo light switch to a new Wi-Fi?
Press and hold the Restart and the Reset buttons together for five (5) clock seconds, then release. The WeMo Light Switch Wi-Fi icon will blink to green then amber in color, indicating a successful reset.
Can't connect to Wemo?
Make sure your router's Wi-Fi is set to broadcast or not hidden. Otherwise, your Wemo device may have difficulties connecting and maintaining a connection to it. Change your router's Wi-Fi channel to avoid interference with other routers in your area that possibly use the same Wi-Fi channel as yours.
How do you unhide a device on Wemo?
Step 6: If your Wemo device does not show up, close the Wemo App and unplug the Wemo; wait for 20 seconds before plugging it back in then open the Wemo App again. NOTE: If the Wemo App freezes or becomes unresponsive, force close it and then open it again.
How do I reset my smart plug?
Reset Your Amazon Smart PlugPress and hold the button on the device for 12 seconds.Release the button once you see the red LED light. A blue LED blinks when reset is complete.Register your Amazon Smart Plug in the Alexa app.
Can Wemo be controlled remotely?
Remote Access is one of the useful features on your Wemo App which allows you to control your Wemo® devices even though you're away from home using your mobile device (smartphone or tablet).
Can Wemo work without Internet?
Can I use a Wemo Account without an active internet connection? No. A Wemo Account requires an active internet connection to function. As soon as your Wemo devices are linked with a Wemo Account, you will only be able to control them on a network with an active internet connection.
How do I connect my Wemo to a new network?
5:307:49Wemo setup and or installing on new wifi network - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you hold it for five seconds until this thing starts blinking. And you know what just wait aMoreAnd you hold it for five seconds until this thing starts blinking. And you know what just wait a minute it goes through some crazy light set up blinking blinking blinking.
How do I connect my Wemo to a new Wi-Fi?
Before reconnecting the Wemo device, make sure to do the following:Reset the Wemo to its factory default settings. ... Download and install the latest version of the Wemo App on your mobile device. ... Make sure to have your Wemo Account credentials ready.Create a Wemo Account if you don't have one yet.More items...
How do I reset my wemo light switch v2?
QUICK TIP: If the Wemo Light Switch is not responding to the Restart button, turn OFF the power of the Wemo Light Switch by turning the circuit breaker OFF and then turning back ON. Step 2: Immediately press and hold the Reset button for 5 seconds.
WiFi OUTDOOR SMART PLUG
Schedule and control two outdoor lights and devices simultaneously with the app or your voice.*
WiFi SMART LIGHT SWITCH 3-WAY
Now you can control any light from hallways, stairwells, the Wemo App, your voice, and more.
WiFi SMART LIGHT SWITCH
Control your lights from anywhere. Schedule them to turn on at sunset, or use Siri, Amazon Alexa or Google Home for hands-free voice control.
How to test Wi-Fi connection on Wemo?
Test the Wi-Fi connection by setting up the Wemo device near your router. Make sure that no device or furniture is interfering with your Wemo device and router's connection. For more troubleshooting tips on how to resolve an intermittent Wi-Fi connection, click here.
What to do if your Wemo is not showing up?
If not all of your devices are showing up in the Wemo App, unplug the ones that are not appearing and do a factory restore of your devices one at a time.
How many characters does a Wemo router have?
Check your router's security settings. Wemo only supports WPA™, WPA2™ and WEP security types and passwords of eight to 63 characters comprised of numbers, letters and special characters.
What is a Wemo rule?
Wemo Rules are a set of instructions that you can easily give to your Wemo devices to function on their own without any intervention from you. A Schedule Rule is the most basic rule that you can make. This rule will control your Wemo device to turn ON and OFF at a time you set.
Can Wemo be controlled?
Wemo was set up but can no longer be controlled. It would seem that the device has lost its settings but in reality nothing is lost. Below are the causes of this problem and their solutions:
Can Wemo routers work remotely?
Apple range extenders also have the same issues with other range extenders. Your Wemo devices may work fine internally but not show up remotely. There is currently no true solution for this.
Can Wemo be connected to Wi-Fi?
The Wemo device can manually be connected to a hidden Wi-Fi name but will eventually become disconnected. The device will blink orange. Changing the Wi-Fi name to broadcast usually resolves the issue.
How to skip to next step on remote image?
To the right of your remote image, if you see More >> as the last option, then click it, otherwise skip to the next step.
What to do if Harmony remote is frozen?
The Harmony remote is frozen or not responding If Harmony stops sending commands or is not responding we recommend rebooting your remote, keyboard or restarting Harmony App. You will not lose any device or Activity information
Can you send IR commands to Harmony hub?
ASSIGN YOUR DEVICE TO THE REMOTE OR A SPECIFIC IR PORT ON THE HUB By default, Harmony hub-based products send IR commands to your devices from the hub, and from both IR mini blasters (if connected) at the same time. IR commands are not sent from the remote, however you may change this
Does Harmony remote drain batteries?
Harmony remote batteries The battery life in the Harmony remote will vary depending on usage. As your Harmony replaces all of the remotes in your home entertainment center, it is doing the work of multiple remotes which can drain batteries at a faster rate than a single device remote
Does Harmony turn off devices?
Changing when a device powers on or off By default, Harmony will turn off any devices that are not being used as part of the current Activity.
Can you teach Harmony to use a remote?
Add/teach a new command to Harmony If a command is missing, you can teach it to Harmony using your original remote. For example, the one that shipped with your television, set‑top box or other device
Can Harmony remotes be used in separate rooms?
Since additonal remotes are typically used in separate rooms, Harmony categorizes your remotes as "rooms". You may delete a remote/room by following the steps below.
