Remote-access Guide

how do i remote access my server 2008 sr standard

by Hailee Schuppe III Published 2 years ago Updated 2 years ago
image

In this post, we will tell you how to use Remote Desktop in Windows Server 2008 for remote management. To make sure that your system can remotely connect, go to Computer (My Computer) Properties from the right-click context menu to enable incoming remote desktop connections. Click on Advanced System Settings and move over to the Remote tab.

To enable Remote Access, open the Routing and Remote Access console from the Administrative Tools menu, right-click the computer running Windows Server 2008 R2
Windows Server 2008 R2
Seven editions of Windows Server 2008 R2 were released: Foundation, Standard, Enterprise, Datacenter, Web, HPC Server and Itanium, as well as Windows Storage Server 2008 R2. A home server variant called Windows Home Server 2011 was also released.
https://en.wikipedia.org › wiki › Windows_Server_2008_R2
that you want to host this role, and then click Configure And Enable Routing And Remote Access.
Jul 15, 2011

Full Answer

What is a remote desktop server?

The Remote Desktop server could be any Windows XP, Windows Server 2003, Windows Vista or Windows Server 2008 computer with Remote Desktop enabled. It could also be any version of Terminal Server. Because clients use HTTPS to connect to the TS Gateway, the TS Gateway will need an SSL certificate — just like an electronic-commerce Web server.

How do I configure and monitor a VPN remote access server?

In this lesson, you will learn how to configure and monitor a VPN remote access server running Windows Server 2008 and Windows Server 2008 R2. To install the RRAS role service, use the Add Roles Wizard and then select Network Policy And Access Services. RRAS is a role service within this role.

How to allow connections from computers running Remote Desktop?

Alternatively, you can also choose Allow Connections From Computers Running Any Version Of Remote Desktop (for allowing remote desktop connection sessions with pre Windows Server 2008 systems). Once done, click OK. Note: make sure to do this on systems that you wish to remotely make connections to and from.

How do I remove RRAS completely from Windows Server 2008 R2?

To remove RRAS completely from a server running Windows Server 2008 R2, issue the command: If you have installed and configured RRAS before, you may need to reset the configuration to get RRAS to perform other functions. To do this, issue the following commands: netsh ras set conf confstate=disabled and then net stop “Routing and Remote Access”.

image

How do I give remote access to a server 2008 R2?

Enable Windows Server 2008 R2 Remote Desktop ServicesOn the Windows ® Server 2008 R2 computer, click Start > Administrative Tools > Server Manager. ... Click Roles, and then click Add Roles. ... Select Remote Desktop Services, and then click Next. ... Select the Remote Desktop Session Host and Remote Desktop Licensing check boxes.More items...

How do I setup Remote Desktop on Windows Server 2008?

How to configure Remote Desktop in Windows Server 2008 R2 step by...Step 1: Begin the installation. ... Step 2: Select Remote Desktop Services roles you want to install. ... Step 3: Pick the license mode. ... Step 4: Allow access to Remote Desktop Session Host (not required) ... Step 5: Configure the client experience.More items...•

How do I access my server remotely?

Remote Desktop to Your Server From a Local Windows ComputerClick the Start button.Click Run...Type “mstsc” and press the Enter key.Next to Computer: type in the IP address of your server.Click Connect.If all goes well, you will see the Windows login prompt.

How do I know if my server is remote access enabled?

Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server and to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services. If the value of the fDenyTSConnections key is 0, then RDP is enabled. If the value of the fDenyTSConnections key is 1, then RDP is disabled.

How do I setup Remote Desktop Services?

ProcedureLog in to the RDS host as an administrator.Start Server Manager.Select Add roles and features.On the Select Installation Type page, select Role-based or feature-based installation.On the Select Destination Server page, select a server.On the Select Server Roles page, select Remote Desktop Services.More items...•

What is port for RDP?

Overview. Remote Desktop Protocol (RDP) is a Microsoft proprietary protocol that enables remote connections to other computers, typically over TCP port 3389.

How do I connect to a Windows server remotely?

Connect to Windows Server via Remote DesktopOpen the Remote Desktop Connection. ... In the Remote Desktop Connection window, click Options (Windows 7) or Show options (Windows 8, Windows 10).Type the IP address of your server.In the User name field, enter the user name.More items...

How can I access my computer from anywhere?

Set up remote access to your computerOn your computer, open Chrome.In the address bar, enter remotedesktop.google.com/access .Under “Set up Remote Access,” click Download .Follow the onscreen directions to download and install Chrome Remote Desktop.

How do I enable remote access to the server is not enabled?

Go to the Start menu and type “Allow Remote Desktop Connections.” Look for an option called “Change settings to allow remote connections to this computer.” Click on the “Show settings” link right next to it. Check the “Allow Remote Assistance Connections to this Computer.” Click Apply and OK.

Why can't I connect to my remote server?

The most common cause of a failing RDP connection concerns network connectivity issues, for instance, if a firewall is blocking access. You can use ping, a Telnet client, and PsPing from your local machine to check the connectivity to the remote computer. Keep in mind ping won't work if ICMP is blocked on your network.

How do I fix remote access to the server is not enabled?

How do I fix the remote access to the server is not enabled?Modify Windows Firewall settings. ... Check Allow Remote Desktop connections. ... Reset the Remote Desktop credentials. ... Add a remote computer IP address to your host's file. ... Add RDGClientTransport key in the registry. ... Modify network properties.

How do I log into a server?

Logging in from Windows There are 2 options, via the menu lookup "remote desktop" and start it. Or click Start » Run.. and type “mstsc” without quotes and hit enter. In the window that appears type the IP of your server and click connect. When asked type your server login details.

How do you connect to a server?

Connecting your Android Device to the Exchange ServerOpen your applications menu and press the email icon.Enter your email address and password.Select manual setup.Select Exchange.Enter in the following information. Domain\Username = acenet\username. ... Change your account options. ... Final page.

How to connect to a remote system?

You can simply enter the IP of the system that you wish to connect remotely to and hit Connect or configure advanced options for managing your connection. For instance, in the General tab, login credentials can be entered to automatically login to the system that you are connecting to (e.g. Domain admin credentials). To visit Advanced Options, click Options button to expand the interface.

How to remotely connect to a computer?

To make sure that your system can remotely connect, go to Computer (My Computer) Properties from the right-click context menu to enable incoming remote desktop connections. Click on Advanced System Settings and move over to the Remote tab. From here select Allow Connections Running Remote Desktop With Network Level Authentication ...

How to enable remote access to a server?

To enable Remote Access, open the Routing and Remote Access console from the Administrative Tools menu, right-click the computer running Windows Server 2008 R2 that you want to host this role, and then click Configure And Enable Routing And Remote Access. Performing this action starts the Routing And Remote Access Server Setup Wizard. The configuration page of this wizard, shown in Figure 9-1, allows you to select the combination of services that this particular server will provide. The Remote Access (Dial-Up Or VPN) option is selected when you want to provide either remote access option or both options to clients outside your organization.

What is VPN in Windows Server 2008 R2?

Windows Server 2008 R2 supports four different VPN protocols: Point to Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol over IPsec (L2TP/IPsec), Secure Socket Tunneling Protocol (SSTP), and IKEv2. The factors that will influence the protocol you choose to deploy in your own network environment include client operating system, certificate infrastructure, and how your organization’s firewall is deployed.

How to configure NPS data?

You can configure which NPS accounting data is sent to the computer running SQL Server by selecting options in the SQL Server Logging properties dialog box shown in Figure 9-9. Clicking Configure in this dialog box allows you to specify the properties of the data link to the computer running SQL Server. When configuring the data link properties for the SQL Server connection, you must provide the server name, the method of authentication that will be used with the computer running SQL Server, and the database on the computer running SQL Server that you will use to store the accounting data. Just as it is a good idea to have a separate partition on a computer to store NPS accounting data, it is a good idea to have a separate database that stores NPS accounting data.

How to configure a RADIUS client?

To configure a RADIUS client using NPS, open the Network Policy Server console from the Administrative Tools menu. Right-click RADIUS Clients and then click New RADIUS Client. This will open the dialog box shown in Figure 9-6.

How to write log files to remote share?

Log files can be written to remote shares. This is done by specifying the UNC path of the share. If you configure this option, it will be necessary to ensure that the share permissions are configured to allow the account that writes the logs to write data to the shared folder. The Log File tab of the Local File Logging properties dialog box is shown in Figure 9-8.

Does DirectAccess require user intervention?

The connection process is automatic and does not require user intervention or logon. The DirectAccess connection process starts from the moment the computer connects to an active network. From the user’s perspective, the computer always has access to the corporate intranet, whether she is sitting at her desk or when she has just connected to a Wi-Fi hotspot at a beachside cafe. Traditionally, users must initiate VPN connections to the corporate intranet manually.

Does SSTP require authentication?

SSTP does not support tunneling through web proxies that require authentication.

What is remote access?

Remote Access is one of today's "big things". As an increasing number of people need access to information stored on work and home computers, the ability to access that information from anywhere is critical. Gone are the days when you could say "I'll get that information to you when I get to my computer".

How does SSTP work?

The following shows how the SSTP connection process works: The SSTP VPN client establishes a TCP connection with the SSTP VPN gateway between a random TCP source port on the SSTP VPN client and TCP port 443 on the SSTP VPN gateway.

Why is SSTP so secure?

SSTP is secure because user credentials are not sent until after a secure SSL tunnel is established with the VPN gateway. SSTP is also known as PPP over SSL, so this means that you can use PPP and EAP authentication mechanisms to make your SSTP connection more secure.

Who is Tom Shinder?

Tom Shinder is a Program Manager at Microsoft and has two decades of networking and security experience. He has written dozens of books, thousands of articles, and spoken at large industry conferences on the topics of IT infrastructure, Cloud computing, and cybersecurity. In his free time, Tom enjoys participating in equine prediction markets.

Does Windows Server 2008 support VPN?

While Windows clients and servers have supported VPN connections for over a decade, the type of VPN support has evolved over time. Windows Vista Service Pack 1 and Windows Server 2008 now support three types of VPN connections. These are:

How to install IIS Web Server 2008?

Perform the following steps on the VPN server to install the IIS Web server role: Open the Windows 2008 Server Manager. In the left pane of the console, click the Roles node. Figure 1. Click the Add Roles link on the right side of the right pane. Click Next on the Before You Begin page.

How to add a role in a server?

In the Server Manager, click the Roles node in the left pane of the console. In the Roles Summary section, click the Add Roles link. Click Next on the Before You Begin page. On the Select Server Roles page, put a checkmark in the Network Policy and Access Services checkbox.

How to access CRL distribution points?

Click the Details tab of the certificate and scroll down to the CRL Distribution Points entry and click on that entry. In the lower pane you will see the various distribution points based on the protocol used to access those points. In the certificate seen in the figure below, you can see that we need to allow the SSL VPN client access to the CRL via the URL:

How do you know what URL the SSL VPN client needs to connect to in order to download the CRL?

How do you know what URL the SSL VPN client needs to connect to in order to download the CRL? That information is contained within certificate itself. If you go to the VPN server again and double click on the certificate in the IIS console, as you did earlier, you will be able to find this information.

Who is Tom Shinder?

Tom Shinder is a Program Manager at Microsoft and has two decades of networking and security experience. He has written dozens of books, thousands of articles, and spoken at large industry conferences on the topics of IT infrastructure, Cloud computing, and cybersecurity. In his free time, Tom enjoys participating in equine prediction markets.

Is CRL site name secure?

I should note here that using the default CRL site name might not be the more secure option, since it exposes a private computer name to the Internet. You can create a custom CDP (CRL Distribution Point) to prevent this if you consider exposing the private name of your CA in your public DNS a security issue. You can find some information on how to change these values at How to Change the Policy Settings for a Certification Authority (CA) in Windows 2000.

Does KeepRasConnections appear in the registry?

The KeepRasConnections registry key does not appear in the registry unless you add it. If you add this registry key, and then set the default value to 0x1, Windows does not close Remote Access connections when you log off from the system. By default, only administrators and the operating system have WRITE permission for this registry key.

Does KeepRasConnections exist in Windows Vista?

KeepRasConnections registry key does not exist in Windows Vista or in Windows Server 2008. Therefore, to maintain Remote Access connections after you log off Windows Vista or Windows Server 2008, you must add a KeepRasConnections registry key with the corresponding values under the following registry subkey.

image

Virtual Private Networking

Privacy Is Not Security

  • I should note here that VPN connections are more about privacy than security. While I do recognize that privacy is a major component of secure communications, privacy in and of itself does not provide security. VPN technologies provide for privacy of communications over the Internet, which prevents intruders from reading the contents of your communications. VPN tech…
See more on techgenix.com

Why Introduce A New Vpn Protocol?

  • Microsoft already had two viable VPN protocols that allowed users to connect to the corporate network, so why introduce a third one? SSTP is a great advance for Windows VPN users because SSTP does not have the problems with firewalls and NAT devices that PPTP and L2TP/IPSec have. In order for PPTP to work through a NAT device, the NAT device needs to support PPTP th…
See more on techgenix.com

The Sstp Connection Process

  • The following shows how the SSTP connection process works: 1. The SSTP VPN client establishes a TCP connection with the SSTP VPN gateway between a random TCP source port on the SSTP VPN client and TCP port 443 on the SSTP VPN gateway. 2. The SSTP VPN client sends an SSL Client-Hellomessage, indicating that the SSTP VPN client wants to establish an ...
See more on techgenix.com

Summary

  • In this article we went over a short history of remote access communications to computer networks. We then discussed the major VPN protocols supported by Windows servers and clients, and then went over some of the security issues with the traditional Windows VPN protocols. We then looked at how SSTP solves the security and accessibility issues presented with PPTP and L…
See more on techgenix.com

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9