Remote-access Guide

how to allow remote access to localhost

by Prof. Hector Hauck Published 2 years ago Updated 2 years ago
image

How To Allow Remote Access To Your Localhost Apps With Ngrok.

  • Install. Installing Ngrok is easiest with a global npm install. You might have some problems if you install it on Linux, in that case run:
  • Add Token.
  • Serve Your Page.
  • Stop Your Connection.

Full Answer

How do I enable remote access on Windows 10?

You can configure your PC for remote access with a few easy steps. On the device you want to connect to, select Start and then click the Settings icon on the left. Select the System group followed by the Remote Desktop item. Use the slider to enable Remote Desktop.

Is it possible to access to localhost from remote machine?

Is it possible to access to localhost from remote machine? You can use a service that provides a tunnel to your local service, such as localtunnel, pagekite or ngrok. These services simplify setting up remote demos, mobile testing and some provide request inspection as well.

How do I access my localhost from the web?

Open that URL on any device with an internet connection and you’ll be accessing your localhost from the Web! One of the more unique offerings ngrok provides is the ability to inspect past traffic. To do that, go to http://localhost:4040/ on your computer.

How do I get permission to connect to a remote desktop?

For permission to connect, you must be on the list of users. Before you start a connection, it's a good idea to look up the name of the computer you're connecting to and to make sure Remote Desktop connections are allowed through its firewall.

image

How can I access my localhost remotely?

For this scenario we should use VPN services. We should connect our local machine to VPN then in other side we should connect our client's machine to VPN that will allow us to access to localhost by local IP address. We can set up our own VPN server however this requires knowledge to do it right.

How do I access localhost from another device?

Step 1 : Connect your phone to PC using USB cable. Step 2 : Use command 'ipconfig' to find out your IPv4 Address (External IP of the Router) e.g 192.168. 1.5 in my case. Step 3: Just access "192.168.

Can't connect to localhost from another computer?

2 AnswersOpen an elevated command prompt (press windows, type "cmd", right click on "Command prompt" and run as administrator)Type in the following code, but replace the "4444" with the port you need to access.netsh advfirewall firewall add rule name="TCP Port 4444" dir=in localport=4444 protocol=TCP action=allow.More items...•

How can I access my localhost from another computer on LAN?

You should follow these steps:Go to the control panel.Inbound rules > new rules.Click port > next > specific local port > enter 8080 > next > allow the connection>Next > tick all (domain, private, public) > specify any name.Now you can access your localhost by any device (laptop, mobile, desktop, etc).More items...

How do I connect to localhost?

To access the server from itself, use http://localhost/ or http://127.0.0.1/ . To access the server from a separate computer on the same network, use http://192.168.X.X where X.X is your server's local IP address. You can find the sever's local IP address (assuming it's Linux) by running hostname -I . 127.0.

How do I make my localhost public?

It can be done in two steps: On the server, create a virtual host like forward.mydomain.com with a reverse proxy to some unused port (say, 5000 ). Now create a tunnel so whatever comes at port 5000 on the server is tunneled to your local machine's port 3000 (PC/laptop).

Why can't I access my local host?

If you're unable to access the web server via localhost, there's a chance that your firewall may be blocking the connection. You can often resolve this problem by modifying your firewall settings to allow incoming connections for the port that MAMP is trying to access.

What is the IP address of localhost?

127.0.0.1The default internal loop IP for the localhost is usually 127.0. 0.1 . This IP is different from the IP that identifies the computer on the network.

How do I connect to localhost 8080?

Hold down the Windows key and press the R key to open the Run dialog. Type “cmd” and click OK in the Run dialog. Verify the Command Prompt opens. Type “netstat -a -n -o | find "8080"".

How do I find my local IP from outside network?

Use a VPN. If you connect to your local area network by using a virtual private network (VPN), you don't have to open your PC to the public internet. Instead, when you connect to the VPN, your RD client acts like it's part of the same network and be able to access your PC.

How do I find my localhost URL?

Use the IP address 127.0. 0.1 for localhost addressing. For example, enter "http://127.0.0.1" into any web browser, and you will see a web page hosted by a web server on the same computer if one is running. Most computers and devices will also allow "http://localhost" for the same purpose.

How can I access a web server from another computer?

6 AnswersOpen Terminal. app . It's under Applications->Utilities .Run ifconfig in the terminal. That shows you all the network interfaces on the machine. ... Verify that you can connect to that address from your server with nc -v 192.168.10.1 3000 . ( replace 3000 with the port your application is running on)

How can I access a web server from another computer?

6 AnswersOpen Terminal. app . It's under Applications->Utilities .Run ifconfig in the terminal. That shows you all the network interfaces on the machine. ... Verify that you can connect to that address from your server with nc -v 192.168.10.1 3000 . ( replace 3000 with the port your application is running on)

What is the IP address of localhost?

127.0.0.1The default internal loop IP for the localhost is usually 127.0. 0.1 . This IP is different from the IP that identifies the computer on the network.

How do I find my local IP from outside network?

Use a VPN. If you connect to your local area network by using a virtual private network (VPN), you don't have to open your PC to the public internet. Instead, when you connect to the VPN, your RD client acts like it's part of the same network and be able to access your PC.

Add Token

To serve your page, you need to create an accout over at the ngrok webpage. Once you have created an account, you need your access token which is available when you sign in to their dashboard.

Serve Your Page

You need to run your page locally before serving it, as it uses your local instance of the app as host when serving it.

Stop Your Connection

In case a normal ctrl + c does not work, there are some other ways to close it.

How to allow remote access to PC?

The simplest way to allow access to your PC from a remote device is using the Remote Desktop options under Settings. Since this functionality was added in the Windows 10 Fall Creators update (1709), a separate downloadable app is also available that provides similar functionality for earlier versions of Windows. You can also use the legacy way of enabling Remote Desktop, however this method provides less functionality and validation.

How to remotely connect to Windows 10?

Windows 10 Fall Creator Update (1709) or later 1 On the device you want to connect to, select Start and then click the Settings icon on the left. 2 Select the System group followed by the Remote Desktop item. 3 Use the slider to enable Remote Desktop. 4 It is also recommended to keep the PC awake and discoverable to facilitate connections. Click Show settings to enable. 5 As needed, add users who can connect remotely by clicking Select users that can remotely access this PC .#N#Members of the Administrators group automatically have access. 6 Make note of the name of this PC under How to connect to this PC. You'll need this to configure the clients.

How to connect to a remote computer?

To connect to a remote PC, that computer must be turned on, it must have a network connection, Remote Desktop must be enabled, you must have network access to the remote computer (this could be through the Internet), and you must have permission to connect. For permission to connect, you must be on the list of users. Before you start a connection, it's a good idea to look up the name of the computer you're connecting to and to make sure Remote Desktop connections are allowed through its firewall.

Should I enable Remote Desktop?

If you only want to access your PC when you are physically using it, you don't need to enable Remote Desktop. Enabling Remote Desktop opens a port on your PC that is visible to your local network. You should only enable Remote Desktop in trusted networks, such as your home. You also don't want to enable Remote Desktop on any PC where access is tightly controlled.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9