how to configure computer port for remote access

Change the listening port for Remote Desktop on your computer

1. Start the registry editor. (Type regedit in the Search box.)
2. Navigate to the following registry subkey: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Terminal Server\WinStations\RDP-Tcp
3. Find PortNumber
4. Click Edit > Modify, and then click Decimal.
5. Type the new port number, and then click OK.
6. Close the registry editor, and restart your computer.

Full Answer

How do I change the port for remote desktop on Windows?

Type the new port number, and then click OK. Close the registry editor, and restart your computer. The next time you connect to this computer by using the Remote Desktop connection, you must type the new port.

How do I set up remote access to my computer?

Set up remote access to your computer. 1 On your computer, open Chrome. 2 In the address bar, enter remotedesktop.google.com/access. 3 Under “Set up Remote Access,” click Download . 4 Follow the onscreen directions to download and install Chrome Remote Desktop.

What is the default port for Remote Desktop Protocol?

Simply put, the default port for using Remote Desktop Protocol is 3389. This port should be open through Windows Firewall to make it RDP accessible within the local area network. If you want to make it accessible over the Internet (which is not safe), the RDP port should be forwarded through the main Internet router to work properly.

How do I allow RDP ports on Windows 10?

Allow RDP port through Windows Firewall Go to Windows Settings (Windows key + i) Go to Update & Security –> Windows Security and click on Firewall & network protection from the right-hand listing. This will open a new window.

How do I enable a port for remote access?

Step 1: Enable Remote Desktop on your computer. ... Step 2: Open Remote Desktop port (port 3389) in Windows firewall. ... Step 3: Set up Port Forwarding (Port Translation) in the router. ... STEP 4: Map your dynamic IP to a hostname. ... STEP 5: Use Dynu DDNS service to access your computer remotely.

What port is used for remote access?

TCP port 3389Remote Desktop Protocol (RDP) is a Microsoft proprietary protocol that enables remote connections to other computers, typically over TCP port 3389.

How do I setup a remote access connection?

On your local Windows PC: In the search box on the taskbar, type Remote Desktop Connection, and then select Remote Desktop Connection. In Remote Desktop Connection, type the name of the PC you want to connect to (from Step 1), and then select Connect.

How do I allow remote access to my computer remotely?

Allow Access to Use Remote Desktop ConnectionClick the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•

Why can't I remote into another computer?

Go to the Start menu and type “Allow Remote Desktop Connections.” Look for an option called “Change settings to allow remote connections to this computer.” Click on the “Show settings” link right next to it. Check the “Allow Remote Assistance Connections to this Computer.” Click Apply and OK.

How do I open firewall ports with Remote Desktop?

Allow RDP port through Windows FirewallGo to Windows Settings (Windows key + i)Go to Update & Security –> Windows Security and click on Firewall & network protection from the right-hand listing. ... Click the link Allow an app through firewall. ... Click on Change settings. ... Search for Remote Desktop from the list.More items...•

How do I access a remote server using IP address?

Remote Desktop to Your Server From a Local Windows ComputerClick the Start button.Click Run...Type “mstsc” and press the Enter key.Next to Computer: type in the IP address of your server.Click Connect.If all goes well, you will see the Windows login prompt.

Does RDP use port 443?

To access your server via RDP on port 443, you either have to use RRAS to redirect port 3389 traffic to port 443 or reconfigure Terminal Services to use port 443 instead of port 3389.

What is the use of port 389?

Name:ldapPurpose:Lightweight Directory Access ProtocolDescription:LDAP (which is what people call it) is a modern and popular Internet directory access protocol used by many systems and services. Most Windows users will encounter it because Microsoft's NetMeeting uses and opens the LDAP port 389 while it is running.1 more row

What is the 443 port?

Port 443 is a virtual port that computers use to divert network traffic. Billions of people across the globe use it every single day. Any web search you make, your computer connects with a server that hosts that information and fetches it for you. This connection is made via a port – either HTTPS or HTTP port.

What is the port 143?

IMAP serverAn IMAP server typically listens on port number 143. IMAP over SSL/TLS (IMAPS) is assigned the port number 993. Virtually all modern e-mail clients and servers support IMAP, which along with the earlier POP3 (Post Office Protocol) are the two most prevalent standard protocols for email retrieval.

Configuring Remote Access on A SQL Server Instance

To enable remote connection on SQL Server right – click on the server and select the Properties option. In the Server Properties dialog under the C...

Configure A Windows Firewall For Database Engine Access

To add a firewall exception for the 1433 port go to Programs -> Administrative Tools select the Windows Firewall with Advanced Security option and...

Configuring Remote Access on A Named Instance of SQL Server

If you using a named instance of SQL Server there are specific things you need to do to allow clients to access the SQL database remotely. As alrea...

Connecting to A Remote SQL Server Instance With ApexSQL Tools

We will show connecting to a remote SQL Server instance in an example of ApexSQL Diff. When the new project is started you need to connect to a sou...

Issues With Windows Authentication

When you try to connect to a remote server using the Windows Authentication you may encounter the following error: We will show the tip to resolve...

How to change port number on remote desktop?

Change the listening port for Remote Desktop on your computer 1 Start the registry editor. (Type regedit in the Search box.) 2 Navigate to the following registry subkey: HKEY_LOCAL_MACHINESystemCurrentControlSetControlTerminal ServerWinStationsRDP-Tcp 3 Find PortNumber 4 Click Edit > Modify, and then click Decimal. 5 Type the new port number, and then click OK. 6 Close the registry editor, and restart your computer.

What port does Remote Desktop listen to?

When you connect to a computer (either a Windows client or Windows Server) through the Remote Desktop client, the Remote Desktop feature on your computer "hears" the connection request through a defined listening port (3389 by default). You can change that listening port on Windows computers by modifying the registry.

How to change port number on Windows?

You can change that listening port on Windows computers by modifying the registry. Start the registry editor. (Type regedit in the Search box.) Click Edit > Modify, and then click Decimal. Type the new port number, and then click OK. Close the registry editor, and restart your computer.

How to allow remote desktop access to local network?

If you want to allow Remote Desktop on the local network only, check the checkbox labeled Private. If you want it publicly available, you should check the Public checkbox too.

How to open Remote Desktop Connection client?

You can open the Remote Desktop Connection client by going to Run –> mstsc.

What is RDP protocol?

Remote Desktop Protocol (RDP) is a proprietary protocol developed by Microsoft to remotely connect to a Windows system using a graphical user interface. RDP is built into Windows by default. RDP listens on TCP port 3389 and udp port 3389. Previously, the RDP software was called Terminal Services client but now it’s called Remote Desktop Connection.

What is RDP client?

Previously, the RDP software was called Terminal Services client but now it’s called Remote Desktop Connection. Windows comes with a remote desktop client that can be used to access the complete Windows Desktop environment remotely. It’s very useful for people who use multiple computers for work.

What port is open and listening?

Check if port 3389 is open and listening. There are times when you successfully open the RDP port but you’re unable to connect to the computer remotely. In that case, make sure that you are able to access port 3389 (or any other port if you have changed it) remotely.

Which port should be forwarded through the main Internet router?

If you want to make it accessible over the Internet (which is not safe), the RDP port should be forwarded through the main Internet router to work properly. Let’s talk about how to open port 3389 in Windows Firewall and the router. [toc]

What IP address to replace 192.168.1.2?

Replace the IP address 192.168.1.2 with your computer’s IP. Replace it with your router’s public IP if you have allowed public access to your computer through the router. The value of TcpTestSucceeded should be True.

What does it mean when you connect to a remote desktop?

When you connect to your PC by using a Remote Desktop client, you're creating a peer-to-peer connection. This means you need direct access to the PC (some times called "the host"). If you need to connect to your PC from outside of the network your PC is running on, you need to enable that access. You have a couple of options: use port forwarding or set up a VPN.

How to enable port forwarding on router?

Enable port forwarding on your router. Port forwarding simply maps the port on your router's IP address (your public IP) to the port and IP address of the PC you want to access. Specific steps for enabling port forwarding depend on the router you're using, so you'll need to search online for your router's instructions.

What does it mean to connect to a PC from outside?

This means you need direct access to the PC (sometimes called "the host"). If you need to connect to your PC from outside of the network your PC is running on, you need to enable that access. You have a couple of options: use port forwarding or set up a VPN.

Where can I find my router's IP address?

Your public IP address (the router's IP). There are many ways to find this - you can search (in Bing or Google) for "my IP" or view the Wi-Fi network properties (for Windows 10).

Can RD client access PC?

Instead, when you connect to the VPN, your RD client acts like it's part of the same network and be able to access your PC. There are a number of VPN services available - you can find and use whichever works best for you.

How to enable remote connection in SQL Server?

To enable remote connection on SQL Server right – click on the server and select the Properties option. In the Server Properties dialog under the Connections tab check the Allow remote connections to this server option:

How to set TCP/IP port to 1433?

Make sure that TCP/IP protocol is enabled and right click on TCP/IP and select the Properties option. In the TCP/IP Properties dialog select the IP Addresses tab and scroll down to IPAII. If the TCP Dynamic Ports dialog box contains 0, which indicates that the Database Engine is listening on dynamic ports, delete the 0 and set the TCP Dynamic Ports to blank and TCP Port to 1433. Port 1433 is the default instance that SQL Server uses:

How to add exception for 1433 port?

To add a firewall exception for the 1433 port go to Programs -> Administrative Tools select the Windows Firewall with Advanced Security option and follow the steps: In the Windows Firewall with Advanced Security dialog click on the Inbound Rules option and select the New Rule command: In the New Inbound Rule wizard select ...

What port is the firewall exception for?

In the Programs -> Administrative Tools -> Windows Firewall with Advanced Security add a firewall exception for the 1434 port and UDP in the Inbound Rules:

What port does SQL Server listen to?

As already stated, the default instance that SQL Server listens is port 1433. For a named SQL Server instance, the ports that are used to talk to the SQL Server are by default dynamic.

How to connect to a remote desktop?

Use Remote Desktop to connect to the PC you set up: On your local Windows 10 PC: In the search box on the taskbar, type Remote Desktop Connection, and then select Remote Desktop Connection. In Remote Desktop Connection, type the name of the PC you want to connect to (from Step 1), and then select Connect.

How to use Remote Desktop on Windows 10?

Set up the PC you want to connect to so it allows remote connections: Make sure you have Windows 10 Pro. To check, go to Start > Settings > System > About and look for Edition . For info on how to get it, go ...

How to check if Windows 10 Home is remote?

To check, go to Start > Settings > System > About and look for Edition . For info on how to get it, go to Upgrade Windows 10 Home to Windows 10 Pro. When you're ready, select Start > Settings > System > Remote Desktop, and turn on Enable Remote Desktop. Make note of the name of this PC under How to connect to this PC. You'll need this later.

How to add port to firewall?

This presumes you are the administrator of the computer. In the Windows Firewall Settings dialog, click Add Port. In the Name box, type a name, such as SQL Server Port. In the Port number box, type 1433. Use the default protocol TCP.

What is the default port for SQL Server?

The default port set by SQL Server is 1433. If you change the default, follow the directions below and change the port number as appropriate.

Where is SQL Server Configuration Manager?

Open the SQL Server Configuration Manager application. This is found in the Configuration Tools folder of the Microsoft SQL Server 2008 folder.

Where is the Control Panel on my computer?

On the Start menu, click Control Panel.

What protocol does SQL Server use?

This procedure uses the TCP/IP protocol.

How to access a computer remotely?

Access a computer remotely. On your computer, open Chrome. In the address bar at the top, enter remotedesktop.google.com/access, and press Enter. Click Access to select which computer you want. Enter the PIN required to access another computer. Select the arrow to connect.

How to remotely access Chrome?

You can set up remote access to your Mac, Windows, or Linux computer. On your computer, open Chrome. In the address bar, enter remotedesktop.google.com/access. Under “Set up Remote Access,” click Download . Follow the onscreen directions to download and install Chrome Remote Desktop.

What happens if someone shares your remote access code?

If someone has shared their remote access code with you, you can remotely offer support.

How many times does the access code work?

The access code will only work one time. If you are sharing your computer, you will be asked to confirm that you want to continue to share your computer every 30 minutes.

Is remote desktop fully encrypted?

For your security, all remote desktop sessions are fully encrypted.