- On your computer open SADP Tool. This program will show you any Hikvision equipment connected directly to your network. You should see a screen like the one below. ...
- Select your NVR or DVR from the list by ticking the box to the left of it. ...
- When you select the device you will see a panel of information on the right that looks like the one in the image above. ...
- Once you have set and confirmed your Verification Code you will now have a screen like the one below. ...
- The last step in this section is to make a note of the relevant portion of the serial number. ...
How to set up NVR remote access?
Step by Step Instructions
- Connect NVR to network with a CAT5 cable.
- Download and install ConfigTool from DahuaSecurity.com, under Support->Download Center->Software
- Run the ConfigTool.
- The ConfigTool should display your IP Camera. ...
- Configure Internet Explorer security settings to allow the plugs to work. ...
- Login with the default credentials: User Name: admin Passsword: admin
How to connect Hikvision cameras not directly connected to NVR?
On our NVR this is done by clicking Management at the top left and choosing the top option Camera. After you’re in the Camera Registration screen you will see the linked devices. If your NVR has no cameras added, or connected then you see a blank screen like in our example.
How to configure Hikvision IP camera with NVR?
- Choose NO-IP for DDNS Type.
- Enter www.NO-IP.com in the Server Address field
- Enter the domain name you created during registration. You can always manage the domain name later in the NO-IP control panel.
- Enter your username and password for www.NO-IP.com.
- Click on Save.
How to setup HIK connect on DVR and NVR?
How to Setup Hik-Connect P2P Service • Using the console of the NVR or DVR, select System Configuration from the Main Menu. • The system configuration menu is where to set the date and time, configure the network setting, change port numbers, enable Hik-connect P2P service, setup email, users accounts and more.
How do I set up HIK-connect remotely?
1) On your phone or tablet install the Hik-Connect app. 2) Select your Region, press Login and then Register. Follow this process through as instructed by the app. 3) Once you have logged in press the + Icon in the top right corner, highlighted on the image below, and then select Scan QR Code.
How do I access my NVR remotely?
To connect a DVR/NVR to the internet or configure a DVR/NVR for remote viewing, first and foremost, connect your DVR/NVR to your network router either via Ethernet cable or wirelessly. Network–enabled DVRs could be configured for remote viewing. Port forwarding is the key to remote viewing and remote access.
How do I access Hikvision NVR on my phone?
How to Use Hik-Connect on Mobile for both iOS and Android?Download the “Hik-Connect” app from the iOS app store or Google Play. How to Use Hik-Connect on Mobile (iOS and Android)Open the app. ... Now you have two options: either login your Hik-Connect account, or add your device to the Hik-Connect App directly.
How do I use my hikvision remote?
0:1710:58How to set up Hik-Connect for remote viewing on your Hikvision CCTV ...YouTubeStart of suggested clipEnd of suggested clipSo first we just want to select our language which is English and then the next thing that the DVRMoreSo first we just want to select our language which is English and then the next thing that the DVR is going to ask you to do is set up a password.
How do I connect IP camera to NVR remotely?
0:351:25How to Connect a Remote IP Camera to a QC Series NVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipCamera select private now enter the IP address of your IP. Camera enter your port number username.MoreCamera select private now enter the IP address of your IP. Camera enter your port number username. And password then click OK when you're finished adding cameras. Click on OK.
How do I get Hikvision NVR online?
0:254:40How to do Hikvision DVR Online and see Cameras from Mobile PhonesYouTubeStart of suggested clipEnd of suggested clipGo to menu configuration. Network general to set device IP parameters including the DNS. Server. YouMoreGo to menu configuration. Network general to set device IP parameters including the DNS. Server. You go to menu configuration network platform access to enable hit connect. Function.
How do I view NVR on my phone?
How do I connect my NVR to my Phone?Click on the “BACK” button. Tap the “+ Device” option to add a device.Enter IP address information and click “Save”. Your new device will be on the previous screen. ... Select new device and choose the channels you wish to see, click the Play/Live button.
How can I access my camera remotely?
How to view your IP camera remotely via a web browserFind your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.After you change the port, you will need to reboot the camera in order to save the changes.More items...•
How can I access my Hikvision DVR from LAN?
How to view (access) Hikvision DVR live view on PC in Local Area Network (LAN)Open Internet Explorer. 0:00.Type the IP Address for the device. 0:09.Type the user name and passport. 0:18.Click on permission to install a new plug-in for the Internet Browser. 0:26.
How do you setup Hik-Connect on NVR?
0:277:41HikConnect Setup for NVR/DVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipCheck box on the top of the screen and press apply the IP address subnet mask and the defaultMoreCheck box on the top of the screen and press apply the IP address subnet mask and the default gateway will fill in automatically. After these fields are filled.
How do I find my Hikvision NVR IP address?
Go to Configuration > System > Camera Management > Click on the blue link next to the camera you wish to log into. There you have it – you're now logged into the camera and ready to perform actions on the camera. Load up SADP – you should see all the IP addresses of the cams listed.
How do I turn off Hikvision NVR remotely?
On the old Hikvision CCTV recorder right click with the mouse, click menu, then click shutdown at the bottom right, and then click shutdown again. You'll see a message “system is shutting down please wait” after few seconds it will then show “Please power off”.
How can I access my security cameras remotely over the Internet?
How to view your IP camera remotely via a web browserFind your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.After you change the port, you will need to reboot the camera in order to save the changes.More items...•
How do I connect my NVR to my smartphone?
How do I connect my NVR to my Phone?Click on the “BACK” button. Tap the “+ Device” option to add a device.Enter IP address information and click “Save”. Your new device will be on the previous screen. ... Select new device and choose the channels you wish to see, click the Play/Live button.
How do I find the IP address of my NVR?
0:002:10How to check the IP address of your NVR or DVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical passwordMoreSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical password log in. And go to network then go to tcpip. Under network and tcp it'll give you an ip address.
How do I log into NVR?
Open up an Internet browser and type in the IP address of the NVR. Log in using username and password of the recorder. Go to Configuration > Network > Advanced Settings > Other. Go to Configuration > System > Camera Management > Click on the blue link next to the camera you wish to log into.
Integrating IP Cameras Over A Wireless Link
A common requirement for CCTV systems on large houses, farms and commercial buildings is to integrate cameras that are installed on a remote building such as a garage or barn. When the recorder is in the main building this can be achieved by extending a local area network using point-to-point wireless bridging devices.
Method B - Adding Cameras From the Local Network
For method B the wireless link (access point side) is connected to the existing local area network (LAN).
How to enable Hik Connect on a recorder?
Enabling Hik-Connect on the recorder GUI 3.0. 1) Right-click and select Menu and then browse to Configuration > Network > Platform Access. 2) Tick the Enable box. You will then be prompted to create a Verification Code, set this as something memorable, and please make a note of it as you will need it again shortly.
How to connect a DVR to a router?
Connect your NVR or DVR to your network by running an Ethernet cable from the LAN port on the recorder directly to your router. Install the Hik-Connect app on your phone or tablet (from App Store or Google Play store). The first step of this process is slightly different depending on which version of the Hikvision software is installed on your ...
How to register a Hik Connect account?
You can consult this article on how to register a Hik-Connect account. 1) On your phone or tablet install the Hik-Connect app. 2) Select your Region, press Login, and then Register. Follow this process as instructed by the app. 3) Once you have logged in press the + icon in the top right corner, highlighted on the image below, ...
How long does it take to set up a DVR?
The steps are easy and logical and the procedure can be finished in 5-10 minutes. Before you begin, make sure that your NVR or DVR is set up locally, that the system has been configured with a password and that your cameras are viewable (on the TV screen).
How to set up a NVR for remote viewing?
1. Understand Your Network. Setting up your NVR for remote viewing requires you to access your Local Area Network (LAN) from the Internet (a Wide Area Network). Your devices connect to the Internet through your gateway router, which is assigned two different IP addresses – one on the LAN, one on the WAN.
When will NVR be available for remote viewing?
October 21, 2020. Setting up your NVR for remote viewing is a critical part of surveillance today, allowing you to watch your security camera feeds while you’re out and about. Your security camera system is designed to protect your premises 24/7, especially when you’re not there. Even if you’ve got a video monitoring company helping out, ...
Is a WAN address static?
The WAN address can either be static (generally for large businesses) or dynamic for residential and small businesses. Dynamic addresses are rotated by Internet Service Providers for security purposes or power fluctuations.
Do you have to enter the same password for NVR?
The username and password will remain the same, but you won’t have to enter the ports for the local connection. Using a smartphone app only requires you to fill in the NVR’s credentials once, but you’ll have to set two IP addresses for your NVR.
How to connect NVR to network?
Connect your NVR to your network by running an ethernet cable from the LAN port on your NVR or DVR directly to your router. If you are using a Windows computer, install SADP from this page. If you are using an Apple computer, install it from here.
How to find serial number on a hik connect?
2) Click on the Add button in the top right corner and, in the window that pops up, enter the 9 digits from the Serial Number that you noted down earlier and press the Search button.
How to set up a NVR for remote viewing?
There are 6 steps to setting up your NVR for remote viewing: Understand your local network. Setup a DDNS account. Open the ports (Port Forwarding) Assign the DDNS to your NVR. Add to the phone and verify that the Remote Viewing works. Note: Many NVRs support viewing via QR codes.
How to see NVR login screen?
If all is good, you should be able to see the login screen of your NVR. Another way is to try it on the smartphone. First, download and install the app that your security system is supposed to use. If not sure, contact the seller/manufacturer. Open the app and tap “add new device”.
