how to configure ip camera for remote access

How do I setup port forwarding for my IP Camera?

Login to your camera's admin interface and go to the network settings area. Confirm what port has been assigned to your camera. Often it will be port 554, 80 or 88 but could be anything. Now login to your router and look for a menu called 'port forwarding' (sometimes it will be under an “Application and Gaming” menu).

How do I access my IP camera from my router?

1:054:35How to Find the IP Camera Address & Set up Port Forwarding for Remote ...YouTubeStart of suggested clipEnd of suggested clipAddress under network information you can also opt to find the camera ip on the router configurationMoreAddress under network information you can also opt to find the camera ip on the router configuration interface first log into the router on the web browser by entering its gateway.

How can I access my CCTV remotely without a static IP?

Step1: Login Camera on Web Browser > Now Go to Config Tab > Network > Put HTTP Port and Server Port - By default HTTP Port 80 assign (i.e 81 and 6036)> Check mark on use the Following IP Address > Assign IP Address on Camera as given example > Apply.

What are the steps to configure IP camera?

5:3610:02Initial IP Camera Configuration - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we want to set our IP address. To 192.168. 0.1 this example this will allow us to connect to theMoreAnd we want to set our IP address. To 192.168. 0.1 this example this will allow us to connect to the pulpal IP cameras. At their default IP. Now our system here is already configured.

What ports need to be open for IP cameras?

You will find that the majority of network devices which are accessible using an Internet browser will be set as standard to port 80, including IP cameras and routers etc. This is due to the standard port for HTTP, or information being displayed through an browser, being port 80.

How do I find the IP address of my IP camera?

The easiest way to find the security camera IP address is to check the Network page on the CCTV camera software (mobile app or PC client). The network page will display all the IP address information of your camera.

What is Onvif setting?

What is ONVIF? The surveillance industry has created an open standard protocol called ONVIF that allows cameras to communicate with each other and with network recording devices. ONVIF has different versions of compatibility that dictate which features can be integrated into the system.

Do IP cameras need static IP?

Yes, security cameras use IP addresses to identify themselves to other digital devices such as a DVR/NVR. If you use an NVR, the recorder itself assigns an IP address to the security camera. Otherwise, you'd have to manually assign a static address to your security camera.

How do I connect my IP camera to my phone?

Use Android as an IP Webcam All you need to do is enable Wi-Fi, find the right app, set it up, then position your Android device as required. The result is a steady IP webcam picture streamed across the web. You can view the footage in any browser.

Can I connect an IP camera directly to my computer?

An IP camera can connect directly to your network or computer, and there are three ways to do so. The three ways listed below do not require a NVR. A NVR, or Network Video Recorder, is the device that IP cameras connect to.

How can I use IP camera without PC NVR?

There are two ways on how you can do this without the NVR. The first option is your PC/mobile device communicates with the IP camera directly via a server. And secondly, it is also possible that the PC/mobile device communicates to a third party server which then connects to the IP camera.

How do I assign a static IP address to my IP camera?

To assign a static IP address to one camera:Locate the camera you want to change from the list.Double-click the IP Address field and enter the static IP address. DHCP is automatically disabled for the camera.Double-click the Subnet Mask field and the Default Gateway field to enter the required values.

How can I access my security cameras remotely?

1:184:14How to View Your IP Security Camera Feeds From Anywhere with Remote ...YouTubeStart of suggested clipEnd of suggested clipThe first step is going to be to hop onto your nvr's hdmi interface or visit the web interface forMoreThe first step is going to be to hop onto your nvr's hdmi interface or visit the web interface for your camera or recorder navigate to the network menu. And then easy cloud.

How do I stream a security camera over the Internet?

Security Camera Live Feed via Web BrowserFind your security camera's IP address.Open a browser of your choice and type in the IP address.Enter login information.Find the HTTP port number used by the cameras and change the port number.Reboot the security camera so you can save the changes.More items...•

How do I connect my camera to WIFI?

How can I connect my Android phone to my camera via Wi-Fi?Enable the hotspot function in your Android phone, i.e., you set up a Wi-Fi network on your Android phone. ... Connect the camera to the Android phone's hotspot-enabled Wi-Fi network.More items...

How do you find the IP address of a router?

Find Your Router IP Address on AndroidGo to Settings.Tap Wi-Fi Settings.Tap and hold on your connected network and select Manage Network Settings.Check the box next to Show Advanced Options.Select Static under IP Settings.Your router IP address is listed under the Gateway section.

Why is remote access important for security cameras?

Remote access is often a key factor when choosing a security camera. The ability to monitor a location remotely is a huge benefit for most and is often the main reason for selecting an IP camera.

Why is my camera not working on the same router?

This is often not possible due to NAT loopback. NAT loopback happens when you try to access a local device using the external IP address or domain name.

How to set up port forwarding?

In order to set up port forwarding you will need to gather some network information, namely the IP address of your camera, internal IP address of your router, external IP address of your router and the port number to be used. Use the following techniques.

What is the default gateway for a router?

Once you have the right area, look for the default gateway. It should be something similar to 192.168.0.1. If you find more than one and cannot decide which one is correct, try entering the IP address into a web browser. Whichever is the correct IP address should bring up your routers web page.

How to find the IP address of a router?

To access this information in Windows XP, go to the Start menu and click on “Run”. In the box that opens, enter “cmd” and click “OK”. In Windows Vista and Windows 7, click the Windows icon and in the search box enter “cmd” and press enter.

How to prevent static IP address?

To prevent this, you need to set a static IP address in your camera. To do this, log into your camera and go into the network settings page. There should be an option there that says something similar to “Obtain an IP address automatically”. Un-tick this and enter a suitable IP address.

How to find my external IP address?

To get the current external IP address of your router, go to www.mycamip.com. Watch out though as this may change. See dynamic DNS below for details.

How to remotely view IP cameras?

The most common way to enable remote viewing to IP cameras is by manually setting up port forwarding on the network router that the camera is connected to. UPnP (universal plug-and-play) is a newer method that is supported by some routers and cameras but is not as reliable in my experience. This article explains ports forwarding and dynamic DNS – two concepts to understand if you want to access security cameras remotely. Setting up port forwarding for multiple IP cameras is also covered.

How to access my camera remotely?

If you are fortunate enough to have a static IP address, you can always access your camera remotely using the IP address of the Internet connection (20 7.5.23.205 in our example) where your camera is installed. If your Internet IP address is dynamic, you should setup a DDNS service to manage changes in your IP address.

Why is it important to reserving IP addresses?

This is important because your port forwarding rule that you will setup will not work if the IP address of the camera changes.

What hostname to use for DDNS?

When you setup your account, you will choose a hostname to use. For example, my-ip-camera .ddns.org. After DDNS is setup, you will use this hostname instead of your IP address to access your IP camera remotely.

How to set port forwarding rule?

When you setup a port forwarding rule, you create a controlled hole in your firewall. To set port forwarding, login to your router and navigate to the port forwarding section of the interface. This will vary by make and model. You should consult your manual or search online for instructions.

How to confirm port forwarding is setup properly?

To confirm that port forwarding is setup properly, you must try to connect from a device that is not on the same network as your camera. If you are on-site where the camera is located, you can turn off the WIFI connection of your phone so that you connect over the cellular phone network.

Where do you make a connection to DDNS?

After you setup an account with the DDNS provider of your choice, a connection to the service must be made from your IP camera, a PC on the same network, or in your router. Where you do this depends on which of your devices support the DDNS update service.

What is the IP address of a camera?

The IP address of a network camera is a private IP. The most common range is 192.168.0.0 - 192.168.255.255, followed by 10.0.0.0 - 10.255.255.255. They are least likely in the private IP range of 172.16.0.0 - 172.31.255.255. Private IPs are good for a LAN. It is like that a street address "101 5th Avenue" is good for locating a home in a city, but you cannot use it to locate a home in another city because every city may have "101 5th Avenue". Every LAN may have a device using a private IP address such as 192.168.0.101.

What is the default port for a camera?

A network camera may use more than one port (the default port is HTTP default port 80). Each port offers a unique service. For example, one port for web UI, one port for RTSP. Non-technical people can treat ports as doors of a home. You get different services by entering different doors.

What is ONVIF conformant camera?

An average user may only need to know that ONVIF is an international standard. An ONVIF conformant camera offers the maximum compatibility and interoperability with many software and hardware on the market. Generally speaking, ONVIF conformant cameras have more features and better quality than traditional non-ONVIF network cameras.

Why do cameras use one port?

All network cameras of major brands use one port for everything - Web UI, ONVIF services, RTSP and snapshot because they use only one transport protocol - HTTP. They support RTSP over HTTP. Some cameras, especially many made in Shenzhen, China require up to three ports - one port for web UI and maybe snapshot, one port ONVIF services, and one port for RTSP.

Why do Axis cameras require users?

web UI, proprietary API). It is critical to add users for ONVIF services because these cameras have no users for ONVIF services by default. The following figure shows how to add ONVIF users.

What is LAN camera?

A LAN is often the home network of a consumer. Plug an Ethernet cable (a.k.a. Cat 5 cable) into the Ethernet socket of the network camera, then plug the other end to the router (a.k.a. gateway or access point). If this network camera does not have Wi-Fi, this may be the only step needed for the network configuration.

How to access a device on a network?

The only way to access a computing device on a network is through its IP address and ports. If there is only one network camera on a LAN, we can ask the router to forward everything to the camera, and everything will be the same as accessing the camera on the LAN except using the public IP address of the router.

How to remotely access a security camera?

Start by physically connecting your security camera to your computer (server). Then install the FlexiHub software on both the server and the remote computer (client) that will be accessing the camera remotely.

How to make a security camera available for remote viewing?

You can make your security camera available for remote viewing through the use of the DDNS service in such a way that the only thing you’ll have to remember is your camera’s hostname. Get the port numbers. You need to know exactly which port your camera is connected to.

How to share a security camera?

To share the security camera over the Internet, simply start the software on both machines using the same login credentials. Click 'Connect' on the remote computer to access a security camera. Once connected, you can use any specialized software to access and remote control the security camera.

Can you view CCTV footage online?

Finally, you’ll be able to view real-time footage from your CCTV camera online, even if at the moment you are outside your LAN.

Can I access security cameras remotely?

Here’s an easy-to-understand guide on accessing security cameras remotely with the use of port forwarding. This method works just fine for any IP camera make, and you can apply it to access security cameras outside of your LAN or Wi-Fi network. Plus, it’s pretty good for remote viewing of your NVR footage.

What is the IP address of a TP camera?

When you connect the TP camera to a network, the camera’s default IP address is 192.168.1.2. You need to use our TP tool to find the camera on the network (the TP Series IP Camera Search tool can be downloaded for free from our website here) and then give it a static IP address.

What is the most desired feature of any CCTV system?

The most desired feature of any CCTV system is to remote access your system from a distant location so you can view your cameras. I am going to teach you how to do it with 2 of our camera types: TP series cameras and eLine series cameras. Remember, that this type of connection is very limited and I will always recommend having an NVR with cameras connected to it rather than having a standalone camera.

What is the app for eline cameras?

The big advantage of the eLine cameras over the TP series cameras is that the mobile app is available for download from a Google Play store or Apple App store. The name of the app is eLine SIP Viewer, and you can use it to access your camera from any Smart phone or tablet.

What storage does an ONVIF camera have?

Storage: As I mentioned before, all of our ONVIF IP cameras have some kind of storage option such as a USB flash drive in or SD card slot. That way all the video can be viewed as well as recorded.

What is the default HTTP port?

The default HTTP port is 80 and it is not recommended for use since some internet providers block port 80. Use the TP tool and change the HTTP port from 80 to any other port, for example we will use port 82. Forward the port 82 for the IP of your NVR and forward a port range from 3000-3005 for the server port.

Is ONVIF a NVR?

The ONVIF IP cameras are a little tricky to set up when working with an NVR since ONVIF is a standard that is not fully supported by surveillance systems manufacturers. But, it makes that camera a great choice when a standalone setup is desired.

Can ONVIF cameras integrate with NVRs?

ONVIF cameras are getting very popular and more of these type of cameras are able to integrate almost 100% with our NVRs. Today I will explain how to use the ELI-SIP-EMVD-21-4R ONVIF IP Dome Security Camera...

How to add a camera to a router?

Step 1. Log into your router’s management page (http://www.tp-link.us/faq-87.html). Go to Forwarding > Virtual Servers and click Add New. Step 2. Type the IP address and the port used by the camera in the corresponding field. For the Protocol, we recommend you select ALL.

How to find the HTTP port number on a camera?

Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera. The default is 80.

What port is used for the camera?

Port 3333 can now be used by the camera.

What is HTTP://192.168.1.101?

HTTP://192.168.1.101 represents the IP address of the camera being accessed. Step 1. Find your camera’s IP address. If you don’t know its IP address, click here. Step 2. Open a web browser and type the IP address. Enter your login information. Step 3.

How to remotely view security cameras?

The easiest and most convenient method on how to remotely view security cameras using the internet is to use the manufacturer’s App or Client. The App or Client is designed for the security cameras by the manufacturers themselves, so unlike third-party software, you don’t need to worry about compatibility issues when watching CCTV cameras from anywhere using the internet.

How to stream a security camera?

Here are the steps on how to stream via Manufacturer App or Client: Step 1: Download the Manufacturer App or Client to your phone or computer. Step 2: Launch the app and enter the unique ID number (UID) to add your security camera device.

What to do after receiving the HTTP port?

After you have received the “HTTP port” and “RTMP port” from the camera device settings, the next thing to do is to configure security cameras for remote viewing. It allows you to log into your router’s web interface to set up the port forwarding commands.

How to check WAN IP address?

If you want an easy way to check the router’s WAN IP address whenever you access your security cameras online, use the DDNS service to configure your security camera on the internet for remote viewing. This is also applicable when you can’t find the new WAN IP address.

Can family members watch security cameras?

The best thing about this method is that your family members can also stream your security camera over the internet simultaneously. As long as you have the App on your phone, and a reliable connection, you can check on your loved ones anytime, anywhere.

Can you watch CCTV cameras from anywhere?

On top of that, the manufacturer will also release new software versions periodically to unlock more advanced features. Thanks to the P2P technology, you can watch your CCTV cameras and monitor your loved ones from anywhere using the internet in a breeze.