how to configure nvr with static ip for remote access

There are 6 steps to setting up your NVR for remote viewing: Understand your local network Setup a DDNS account Open the ports (Port Forwarding) Assign the DDNS to your NVR Add to the phone and verify that the Remote Viewing works

Full Answer

How do I set up my NVR for remote viewing?

Setting up your NVR for remote viewing means accessing your Local Area Network (LAN) from the Internet (WAN – Wide Area Network). When you want to see a camera’s feed on the phone, you’re going from the “outside” Internet to your local network (where the system is installed).

Can I put the static IP in the DVR/NVR?

You would not put the Static IP in the DVR/NVR. You would pu the static ip in your router. Do you have a separate modem and a separate router? Please let us know the models numbers of each. Thank you for your reply, you are saying that put the Public static IP in ADSL Modem not in the DVR right?

How do I set up my DVR to work with my router?

If you are talking about giving the DVR a static IP on your local network, such as 192.168.0.100, you can set that all up in your router menu. You will then need to set up port forwarding in your modem to forward outside requests to the DVR for remote viewing applications.

How to configure a Poe NVR?

The configuration starts with a hardware setup. Here is how you can proceed with the hardware setup: Take the Ethernet cable from the router and connect it at the back of NVR. Ensure that NVR is connected to the Internet. Use Ethernet cables to connect the IP cameras to PoE NVR.

How do I access my NVR remotely?

To connect a DVR/NVR to the internet or configure a DVR/NVR for remote viewing, first and foremost, connect your DVR/NVR to your network router either via Ethernet cable or wirelessly. Network–enabled DVRs could be configured for remote viewing. Port forwarding is the key to remote viewing and remote access.

How do I connect IP camera to NVR remotely?

0:351:25How to Connect a Remote IP Camera to a QC Series NVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipCamera select private now enter the IP address of your IP. Camera enter your port number username.MoreCamera select private now enter the IP address of your IP. Camera enter your port number username. And password then click OK when you're finished adding cameras. Click on OK.

How can I remotely access my DVR without static IP?

Step1: Login Camera on Web Browser > Now Go to Config Tab > Network > Put HTTP Port and Server Port - By default HTTP Port 80 assign (i.e 81 and 6036)> Check mark on use the Following IP Address > Assign IP Address on Camera as given example > Apply.

How do I access my IP camera with a static IP?

How to view your IP camera remotely via a web browserFind your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.After you change the port, you will need to reboot the camera in order to save the changes.More items...•

How do I access my Hikvision NVR remotely?

Go the following menu location: Configuration --> Network --> Platform Access. PRODUCTS: HIKVISION DEVICES TOPICS COVERED IN THIS KBA: How to enable Hik-Connect remote access on HIK devices (NVR/DVR/Camera). c. Select the Enable tick box at the top of the page.

How do I access my CCTV DVR remotely?

Please follow these setup instructions to setup remote Internet access for the dual codec JPEG DVR:Assign your DVR an IP Address.Connect to your DVR on your LAN - Local Area Network.Setting up Port Forwarding on your Router.Setting up a Static DHCP IP address for your DVR.Remote Internet Setup.More items...

Should I enable DDNS on NVR?

Enabling the DDNS feature on the DVR is useful if you don't have a static IP and need a service to keep track of changes to your dynamic IP and be able to access the DVR remotely via a hostname.

Do you need a static IP for CCTV?

Re: CCTV Static IP address The camera will need to have a static local IP address outside of the DHCP range of the hub, i.e 192.168. 1.10 which you will need to set on the camera itself rather than relying on the hub address reservation.

How does DDNS work with DVR?

The DVR will only use its DDNS functions in a situation where the DVR is assigned its IP address by the Internet Service Provider (ISP). Your DDNS provider will prompt you to select a username and password. It will issue you a name server address that you will now use to connect to your DVR instead of using the IP.

How do I set a static IP on my security camera?

0:000:32How to set up Static IP address on your IP Camera - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo on the left-hand corner set up you will see network setup click on that then you can selectMoreSo on the left-hand corner set up you will see network setup click on that then you can select between the HCP or static IP address.

How can I use IP camera without PC NVR?

There are two ways on how you can do this without the NVR. The first option is your PC/mobile device communicates with the IP camera directly via a server. And secondly, it is also possible that the PC/mobile device communicates to a third party server which then connects to the IP camera.

How do I assign an IP address to my CCTV camera?

Configuring the IP address of the cameraOpen a web browser like Internet Explorer then enter the camera's IP address in the Address bar.Enter your camera's User name and Password then click OK.Click the Setup tab.Click Basic located at the left side of the page.Select the Configuration Type.

Can I connect IP camera directly to NVR?

NVR without Power over Ethernet means it has no Ethernet ports on the back panel, so it can not be connected to IP cameras directly, which requires an external PoE switch or a power adapter to provide power to each IP camera.

How do I connect my wireless IP camera to my DVR?

Here's what you will need to follow this guide: PoE switch - to power the IP cameras. Router - to network the cameras and the DVR on the same local network....Connect IP cameras to PoE Switch.Configure DVR to your network.Configure cameras to your network.Add cameras to the XVR using its menu interface.

Does NVR need to be connected to router?

If your NVR is connected to a monitor and to power, it doesn't need to be connected to the Internet in order to access the recorder's camera feeds. In fact, the recorder doesn't even need to be connected to a LAN outside of itself.

How do I access my Dahua NVR remotely?

Setup by Step InstructionsLocate the serial number of your NVR or DVR. ... Enter your account information, and login with an account.Click, "Add"Input the following and then click save: ... Go to Live, select NVR and select a camera and you may see it under live view.

How to Setup NVR for Remote Viewing

Setup your NVR for remote viewing is an important component of today’s surveillance, allowing you to keep an eye on your security camera feeds when you’re out and about.

Configure Port Forwarding

Port forwarding ties certain ports on your router to a LAN device, sending traffic to that device — in this example, your NVR/DVR. You can’t select a device on your LAN to visit without port forwarding. By logging into your router’s IP address on the local network, you may forward ports.

Use Houston Security Solutions to Assist You

Setting up remote viewing is important for safeguarding your home, but it is not the only consideration. Obviously, you’ll need a security camera system first, and you may also require an access control system or a burglar alarm. Professionals develop and install the greatest security systems, both commercial and domestic.

How to check NVR HDD?

To check or make changes to the NVR HDD follow these steps: Log into the system. Under Settings, click the Storage tab. A window will appear where you can see all details and parameters concerning your storage device.

Where can I hide my NVR?

Find a good spot where you can hide your NVR. It can be a secret wall, closet or cabinet. Playing hide and seek with your recorder only applies if the fan does not produce a lot of noise.

How to configure snapshot alerts?

You can configure snapshot alerts via email without installing a storage device. When setting an alarm schedule, the recorder uses a 24-hour clock. To get the correct IP address of your NVR, log into the system and click the Network Tab. Ensure the DHCP checkbox is active.

What operating system does an NVR come with?

An NVR comes with an operating system. To safeguard it from malicious exploits, always check for software updates. No matter how detailed you get with the configurations, you will end up with a useless black box if you do not update it on a regular basis. Your NVR will have either a Linux or Windows OS.

Why do I need a password for my NVR?

Having a password on your recorder protects your system from unauthorized access. Your new recorder might come with a default password set by the manufacturer. Every NVR comes with a client desktop application that allows you to make changes to the recorder settings.

What resolution do you need to connect a recorder to a TV?

If you plug your recorder to your TV and get a blank screen, you have to adjust the resolution settings. By default, the resolution is 1280 x 1024. Connect your unit to a TV using a VGA cable (not HDMI). Once you access the system, change the resolution to 1920 x 1080.

What is the goal of configuring your own system?

However, the basics remain the same. The goal is to help you find pleasure in configuring your own system. As long as you follow the few important tips I have mentioned, you will be fine. You want your system to be secure from malicious exploits and physical destruction.

How to connect NVR to TV?

Take an HDMI cable or a VGA cable to connect NVR and TV or monitor. Ensure that you use the right input to connect the TV or the monitor— HDMI 1, HDMI 2, or VGA. When these steps are performed properly then NVR and IP camera connection can be easily made. Software setup is the next step in the configuration, and this can be easily done by ...

What is NVR on the internet?

NVR when connected to the Internet provides easy remote access of the recordings. It sends alerts or notifications to users regularly and creates backup of the videos on cloud storage solutions. In the absence of the Internet, NVR will record and stream the videos, but they will not be remotely accessible to users.

What is the difference between a DVR and a NVR?

Most manufacturers provide technical assistance during the connection process or they also supply an easy-to-understand instruction manual with the product and accessories. NVR is very much similar to digital video recorders (DVR). DVR is mainly used with analog cameras, whereas NVR is used with IP Cameras. It is basically a DVR of an IP camera.

How to find Ethernet switch for IP surveillance?

you can find ethernet switches for IP surveillance in different configurations. The configuration starts with a hardware setup. Here is how you can proceed with the hardware setup: Take the Ethernet cable from the router and connect it at the back of NVR. Ensure that NVR is connected to the Internet.

How to connect a camera to a POE switch?

As discussed before, NVR without PoE switch has no Ethernet ports at its back panel. It utilizes an external power adapter or an external PoE switch to power each IP camera. Like NVR with a PoE switch, the configuration of NVR for IP camera without a POE switch also begins with the hardware configuration. Here is how to proceed: 1 Take an Ethernet cable to connect the LAN port on the external PoE switch and the router. Then connect the router with the non-PoE NVR. 2 Use Ethernet cables to connect all IP cameras to the PoE switch RJ45 ports. The PoE switch will deliver power as well as support video transmission. 3 Use an HDMI cable or VGA cable to connect the monitor and the NVR. Always use the right input for making the connection.

What is NVR camera?

What is NVR? A Network Video Recorder (NVR) is a system featuring a software application. This system is designed to collect and store the videos captured by all cameras connected to the network. NVR records these videos on mass storage devices.

Can a non-PoE camera be plugged into a PoE switch?

Non-PoE models feature no ports for plugging for cameras. However, they feature an inbuilt scan function that can scan the camera on the same network. The scan feature is also used by PoE models. For configuring, the NVR for IP camera on the network using PoE switch, you will require some components and accessories including a power cable, ...

How to set up a NVR for remote viewing?

There are 6 steps to setting up your NVR for remote viewing: Understand your local network. Setup a DDNS account. Open the ports (Port Forwarding) Assign the DDNS to your NVR. Add to the phone and verify that the Remote Viewing works. Note: Many NVRs support viewing via QR codes.

How to see NVR login screen?

If all is good, you should be able to see the login screen of your NVR. Another way is to try it on the smartphone. First, download and install the app that your security system is supposed to use. If not sure, contact the seller/manufacturer. Open the app and tap “add new device”.

How many IP addresses does a router assign to each device?

All the devices on your local network are connected to your router which assigns two IP addresses: one IP address unique for each device connected locally (for example NVR, printer, laptop, etc) and another external WAN IP that identifies that local network on the Internet.

What does static IP mean?

Static means it will not change when the device reboots, it will be the same IP address all the time. Dynamic means the routers assign an IP address to the devices anytime they join the network. For security camera systems, it’s important to have a static IP address.

What is a DDNS network?

A DDNS is like a nickname of your network that ensures that you can reach and access the network even if the external IP address (WAN) randomly changes. Basically, when you open a DDNS account with a provider, your network will be associated with a customized hostname).

What IP address do I need for a DVR?

If you are talking about giving the DVR a static IP on your local network, such as 192.168.0.100, you can set that all up in your router menu.

Does my ISP have a static IP?

Your ISP will either assign you a static IP or a dynamic depending on the plan you have. Many plans come with a static IP these days. If you have a dynamic IP then you will need to register for a Dynamic DNS service. If you are talking about giving the DVR a static IP on your local network, such as 192.168.0.100, ...