Remote SPAN Cisco Configuration With Packet Tracer Watch on Switch 1# configure term Switch 1 (config)# vlan 8 Switch 1 (config-vlan)# remote span Switch 1 (config-vlan)# exit Switch 2# configure term Switch 2 (config)# vlan 8 Switch 2 (config-vlan)# remote span Switch 2 (config-vlan)# exit
Can Packet Tracer take control of the other host?
Sorry for the broad answer, I don't think / remember that packet tracer had a option in their hosts to take control of the other. A wireless network has to be designed at home with remote access from office. There are 3 users at home. Two users have a desktop and the third user has a laptop.
Is it possible to run RDP from Packet Tracer?
If you are expecting / expected to run a Windows like RDP within packet tracer I don't think that is possible.
How do I configure a Cisco switch for remote management?
To accomplish this, the following will be done: (i) Assign IP addresses, subnetmask and default gateways. Implementation. The following configuration commands will the required to configure a Cisco switch for remote management. The commands used here a for the lab represented in the network topology used here.
How can I simulate a RDP connection using telnet?
If your object is to have two client devices where one connects to the other on a certain port (i.e. port 3389, which is RDP) then you can simulate that in packet tracer - telnet ipaddress 3389 from the client to the host you want to connect to to prove that the connection can be made.
How do I configure my router for remote access?
All you need to do is type the router IP or default gateway address in the web browser. Next, enter your username and password. Now, once you are in the router's web portal, look for the Remote Management option. Some routers called it Remote Access and it's usually found under Advanced Settings.
How do you remote access a switch?
Step 1 From the remote host, enter the telnet command and the name or IP address of the switch you want to access. Step 2 At the prompt, enter the password for the CLI. If no password has been configured, press Return. Step 3 Enter the necessary commands to complete your desired tasks.
What is SSH in Cisco Packet Tracer?
SSH (Secure Shell) is one of the most used protocols in network World. As a secured alternative of Telnet, SSH is always in the life of a network engineer. It helps us to connect our routers, swithces and any other network equipments. Especially because of SSH is more secure, it is always prefered more than Telnet.
How do I manage a remote switch?
To prepare a switch for remote management access, the switch must be configured with an IP address and a subnet mask. Keep in mind that to manage the switch from a remote network, the switch must be configured with a default gateway. This is very similar to configuring the IP address information on host devices.
How do I remotely control a Cisco switch?
0:2112:19Cisco router and switch configure remote access (telnet/ssh) - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor telnet in the way we need to do that is we edit the vty lines Pete definitely BTY stands forMoreFor telnet in the way we need to do that is we edit the vty lines Pete definitely BTY stands for virtual terminal 0 to 15. And then we need to tell it we want set a password we'll set that to Cisco.
What is Cisco Vty?
The term “vty” stands for Virtual teletype. VTY is a virtual port and used to get Telnet or SSH access to the device. VTY is solely used for inbound connections to the device. These connections are all virtual with no hardware associated with them.
How do I enable SSH?
Activate or deactivate the SSH serversudo rm -f /etc/ssh/sshd_not_to_be_run sudo systemctl enable ssh sudo systemctl start ssh.sudo mv /etc/init/ssh.conf.back /etc/init/ssh.conf sudo start ssh.sudo systemctl stop ssh sudo systemctl disable ssh.sudo stop ssh sudo mv /etc/init/ssh.conf /etc/init/ssh.conf.back.
What does SSH stand for?
Secure ShellSSH, also known as Secure Shell or Secure Socket Shell, is a network protocol that gives users, particularly system administrators, a secure way to access a computer over an unsecured network.
How do I connect to my router via SSH?
For Linux/Mac UserLaunch Terminal. Click the Terminal icon to launch Terminal. Then, input the following command: ssh root@192.168.8.1. If you have ever connected to another router, host key verification failed may displayed as follow: ... Log In Router. Retry the SSH login command: ssh root@192.168.8.1. Type "yes"
How do I configure a switch?
How to configure a network switchStep 1: Connect to the console. ... Step 2: Set a management IP and default gateway. ... Step 3: Set hostname and domain name. ... Step 4: Set logins on VTY lines and console port. ... Step 5: Set Privileged EXEC password. ... Step 6: Enable SSH. ... Step 7: Create VLANs. ... Step 8: Add access ports to a VLAN.More items...•
How do I set a default gateway in Packet Tracer?
To configure the default gateway for the switch, use the ip default-gateway command. Enter the IP address of the default gateway. The default gateway is the IP address of the router interface to which the switch is connected. Use the copy running-config startup-config command to back up your configuration.
How do I access a Cisco switch?
Configuring the Switch Web GUIConnect your PC to the service port and configure an IPv4 address to use the same subnet as the switch. ... Start Internet Explorer 10 (or later), Firefox 2.0. ... On the Accessing Cisco Switch page, click the Wireless Web GUI link to access switch web GUI Home page.More items...
Can Nintendo Switch be played remotely?
You can play together online or in the same room using one system or multiple systems*. Specific features vary by game, such as voice chat or split-screen play, but sharing fun with friends and family is a key focus for Nintendo Switch.
Can I connect my switch to my PC?
Connect your Nintendo Switch console to a computer using a USB cable (sold separately). The USB cable must be connected directly to the USB Type-C™ connector at the bottom of the Nintendo Switch console (the USB ports on the dock do not support this feature).
How do I find a switch on my computer?
On your laptop or computer, open the Game Capture HD app. Turn on the Nintendo Switch and press Home on one of the controllers. Connect your laptop with an Egato device. Now, you'll be able to see the Nintendo Switch home screen on the screen of your device.
How does a switch make a forwarding decision?
To forward the frame, the switch examines the destination MAC address and compares it to addresses found in the MAC address table. If the address is in the table, the frame is forwarded out the port associated with the MAC address in the table.
Permanently disable service call-home 9300 ver 16.9
I've done no service call-home and no call-home, but it gets enabled after reboot by Smart Agent. How do I permanently disable this?
CCNA Labbing Equipment
Hello all! Currently I am looking for equipment to support my CCNA 200-301 certification study. What is the minimum/recommended lab setup for it? I am looking for the cheapest option possible too because it is pretty hard to find (used) Cisco devices in my country (Malaysia). Thank you!
Most convenient way to document configuration changes
We used to produce a file containing the detailed documentation for every change implemented for one of our customers on their appliances. This included every line of configuration prompted.
I Need Cisco Customer Rep
I'm hoping among the 56k+ members there might be someone who can help me. I have a customer that recently purchased two ASAs. The devices were registered under the wrong company. I've tried calling multiple times and no one seems to be able to help.
Dual mpls design with route redistribution
If I had 2 sites (site A and site B)... and the sites talk through mpls. And it looks like: site A L3 switch <-ospf-> cpe (with ospf/bgp mutual route redisitribution) <-bgp-> MPLS cloud <-bgp-> cpe (redistribution) <-ospf-> site B L3 switch. That part works fine.
What command is used to encrypt passwords on routers?
In the second step, we will use “ service password-encryption” command to encrypt passwords on the routers. This sis a classical command used after password configuration. The main duty of this command is encrypting the clear text passwords. And with this command, passwords are shoed as hashed in the router config file.
What is the password for Gokhan router?
This step is the classical user definion on the router. We will do it with username, password and the priviledge level. Our user is Gokhan, password is abc123 and the priviledge mode is 15.
Objective
The objective of this lab is to configure the switch for remote management such that the laptop PC residing on a remote network be used to login and manage it via ssh . To accomplish this, the following will be done:
Implementation
The following configuration commands will the required to configure a Cisco switch for remote management. The commands used here a for the lab represented in the network topology used here. However, the solution can be achieved in many different ways.
Verification
To verify that I have configured the Cisco switch for remote management via ssh, I try to access the switch using the laptop on the network 192.168.0.0/24 using ssh. Remember that both the laptop and the switch are on different networks. See the result below.
Telnet Operation
You might not always have direct access to your switch when you need to configure it. You need to be able to access it remotely and it is imperative that your access is secure. This topic discusses how to configure Secure Shell (SSH) for remote access. A Packet Tracer activity gives you the opportunity to try this yourself.
SSH Operation
Secure Shell (SSH) is a secure protocol that uses TCP port 22. It provides a secure (encrypted) management connection to a remote device. SSH should replace Telnet for management connections.
Verify the Switch Supports SSH
To enable SSH on a Catalyst 2960 switch, the switch must be using a version of the IOS software including cryptographic (encrypted) features and capabilities. Use the show version command on the switch to see which IOS the switch is currently running.
Configure SSH
Before configuring SSH, the switch must be minimally configured with a unique hostname and the correct network connectivity settings.
Verify SSH is Operational
On a PC, an SSH client such as PuTTY, is used to connect to an SSH server. For example, assume the following is configured:
Packet Tracer – Configure SSH
SSH should replace Telnet for management connections. Telnet uses insecure plaintext communications. SSH provides security for remote connections by providing strong encryption of all transmitted data between devices. In this activity, you will secure a remote switch with password encryption and SSH.
