how to configure server 2012 for remote access

Configuration of VPN Remote Access on Server 2012

• Step (ii) Select Deploy VPN only from the next window. Step (iii) Right-click your server name and select”Configure and Enable Routing and Remote Access.
• Step (iv) Select Custom configuration.
• Step (v) Select VPN access. Step (vi) You may get this error if ports mentioned above are not whitelisted, so make sure incoming VPN traffic is allowed. ...

Full Answer

How do I set up a remote access server?

On the server that will act as the Remote Access server, in the Server Manager console, in the Dashboard, click Add roles and features. Click Next three times to get to the server role selection screen. In the Select server roles dialog box, select Remote Access, click Add Features, and then click Next. Click Next five times.

How to configure the remote access role?

Install the Remote Access role. Configure the deployment type as DirectAccess and VPN, DirectAccess only, or VPN only. Configure the Remote Access server with the security groups that contain DirectAccess clients. Configure the Remote Access server settings. Configure the infrastructure servers that are used in the organization.

How do I set up a remote access server in Salesforce?

On the server that will act as the Remote Access server, in the Server Manager console, in the Dashboard, click Add roles and features. Click Next three times to get to the server role selection screen. In the Select server roles dialog box, select Remote Access, click Add Features, and then click Next.

How do I allow remote access to a web service?

In the Properties dialog box, click the Anywhere Access tab. On the Anywhere Access tab, select the Allow Remote Web Access and access to web services applications check box to allow a user to connect to the server using Remote Web Access.

How do I remotely access a Windows 2012 server?

To turn on Remote Web AccessOpen the Dashboard.Click Settings, and then click the Anywhere Access tab.Click Configure. The Set Up Anywhere Access Wizard appears.On the Choose Anywhere Access features to enable page, select the Remote Web Access check box.Follow the instructions to complete the wizard.

How do I enable Remote Access to my server?

Right-click on "Computer" and select "Properties". Select "Remote Settings". Select the radio button for "Allow remote connections to this computer". The default for which users can connect to this computer (in addition to the Remote Access Server) is the computer owner or administrator.

How do I know if Windows 2012 is RDP enabled?

Open the Server Manager from the taskbar/ Click on Local Server / Locate Remote Desktop under Properties which is currently Disabled, and Click on Disabled. The System Properties window will appear. Select Allow remote connections to this computer, and it's recommended to check the box below.

How do I setup a Remote Access connection?

On your local Windows PC: In the search box on the taskbar, type Remote Desktop Connection, and then select Remote Desktop Connection. In Remote Desktop Connection, type the name of the PC you want to connect to (from Step 1), and then select Connect.

How can I access a server from outside the network?

How does it work?Open Remote Desktop Connection on your computer.Type in your organisation's public IP address and click connect.Enter your organisation's username and password.

How do I fix remote access to the server is not enabled?

How do I fix the remote access to the server is not enabled?Modify Windows Firewall settings. ... Check Allow Remote Desktop connections. ... Reset the Remote Desktop credentials. ... Add a remote computer IP address to your host's file. ... Add RDGClientTransport key in the registry. ... Modify network properties.

How do you check RDP is enabled or not?

Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server and to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services. If the value of the fDenyTSConnections key is 0, then RDP is enabled. If the value of the fDenyTSConnections key is 1, then RDP is disabled.

Why is RDP not connecting?

The most common cause of a failing RDP connection concerns network connectivity issues, for instance, if a firewall is blocking access. You can use ping, a Telnet client, and PsPing from your local machine to check the connectivity to the remote computer. Keep in mind ping won't work if ICMP is blocked on your network.

What is Remote Desktop Services in Windows server 2012?

The Remote Desktop Services server role in Windows Server 2012 provides technologies that enable users to connect to virtual desktops, RemoteApp programs, and session-based desktops. With Remote Desktop Services, users can access remote connections from within a corporate network or from the Internet.

How do I connect remotely to another computer?

Access a computer remotelyOn your Android phone or tablet, open the Chrome Remote Desktop app. . ... Tap the computer you want to access from the list. If a computer is dimmed, it's offline or unavailable.You can control the computer in two different modes. To switch between modes, tap the icon in the toolbar.

How do I access another computer on the same network?

Step 1: Connect two Computers using an ethernet cable. Step 2: Click on Start->Control Panel->Network and Internet->Network and Sharing Center. Step 3: Click on option Change Advanced Sharing Settings in the upper-left side of the window. Step 4: Turn on file sharing.

How do I authorize a user for remote login?

Allow Access to Use Remote Desktop ConnectionClick the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•

How do you tell who is RDP into a server?

The easiest way to determine who has access to a particular Windows machine is to go into computer management (compmgmt. msc) and look in Local Users and Groups. Check the Administrators group and the Remote Desktop Users group to see who belongs to these.

How can I tell who is remoted to my server?

RemotelyHold down the Windows Key, and press “R” to bring up the Run window.Type “CMD“, then press “Enter” to open a command prompt.At the command prompt, type the following then press “Enter“: query user /server:computername. ... The computer name or domain followed by the username is displayed.

Publishing Applications:-

A collection is a logical grouping of RDSH servers that application can be published from. Note: Each RDSH server can only participate in a single...

RemoteApp Global Permissions

By default the QuickSessionCollection gives all Domain Users access to Remote App programs. To change this click Tasks -> Edit PropertiesClick User...

RemoteApp Program Permissions

If you want to change the inherent permissions of a RemoteApp, select the application -> right click and click Edit PropertiesClick User Assignment...

Accessing RemoteApp Programs Via The Web Access

To access your newly deployed RDS environment enter the following address of your RDWeb Access into your browser. Allow the add-on to run if prompt...

How to install Remote Access Server?

On the server that will act as the Remote Access server, in the Server Manager console, in the Dashboard, click Add roles and features. Click Next three times to get to the server role selection screen. In the Select server roles dialog box, select Remote Access, click Add Features, and then click Next.

What group does DirectAccess belong to?

For a client computer to be provisioned to use DirectAccess, it must belong to the selected security group . After DirectAccess is configured, client computers in the security group are provisioned to receive the DirectAccess Group Policy Objects (GPOs) for remote management.

How to change remote app permissions?

If you want to change the inherent permissions of a RemoteApp, select the application-> right clickand click Edit Properties

What is RDSH in remote desktop?

Remote Desktop Session Host [RDSH]: Applications are installed and published from the Session Host servers.

What are the roles in RDS?

There are three core roles to setup a RDS environment and are as follows: 1 Remote Desktop Session Host [RDSH]: Applications are installed and published from the Session Host servers. 2 Remote Desktop Connection Broker [RDCB]: This role handles user sessions by load balancing among the RD Session Host servers. Also allows disconnected users to reconnect to their existing sessions without starting a new one. 3 Remote Desktop Web Access [RDWA]: This role provides a web portal to access the RDS environment. Also allows Windows 7 & 8 desktops to connect using the RemoteApp and Desktop Connection.

What is RDWA in Windows 7?

Remote Desktop Web Access [RDWA]:This role provides a web portal to access the RDS environment. Also allows Windows 7 & 8 desktops to connect using the RemoteApp and Desktop Connection.

How many RDS roles are there in a single VM?

In my environment I will have the three core RDS roles running on a single VM (all-in-one con. If you have a large number of users you will run through the Standard deployment where the three core services run on separate servers.

What applications are in RDS?

Once logged in you will see applications that you have access to. If you went through the Quick Setup of RDS it will have created a “Collection” that contains Calculator, MS Paint and Wordpad. Click on a application to launch it. If you get a certificate error click Continue.

What is RDG role?

The follows roles are not required but add additional abilities to RDS: Remote Desktop Gateway [RDG]: This role enables remote users to use the Remote Desktop Protocol (RDP) over HTTPS. It is placed on the edge of your network and acts as the entry point to your RDS environment externally.

What is a remote desktop gateway?

Remote Desktop Gateway is used to allow secure connections using HTTPS from computers outside the corporate network. The configuration has been simplified in Windows Server 2012 and 2012 R2.

Do you have to allow a certificate to be added to the destination clients trusted stores?

You must allow the certificate to be added to the destination clients Trusted stores.

How to add features to remote access?

Select “remote access” and choose “add features” that are required for remote access. Also, select “include management tools.”

What is direct access in Windows 2012?

Direct access is the commercial name of Windows 2012 server’s remote access solution. In earlier versions of Windows, remote access offered limited features to the remote users. Windows 2012 is the first Microsoft server that makes remote access users feel like working within the corporate network. This post aims to show you how to install direct access in a Windows 2012 server in order to allow clients to access, and use the internal network from the Internet. Before starting the installation process, you need to meet a number of prerequisites that can be broadly divided into:

How to add ISATAP to DNS?

Manage out means you will be able to access the remote computer from your internal network. Open the forward look up zone, and right click on the right side of the panel. Select “New Host (A or AAAA) record”. Type ‘ISATAP’ under host and type IP of the internal network card of the direct access server. Next, click on “add host.”

How to enable ICMPv4 in Windows 10?

You need to allow ICMPv4 using group policy object in order to teredo use it. Open group policy management console, and right click on group policy object and click new. Name it and click ok. Now, right click on this new policy and click edit. Select computer configuration>windows settings>security settings> windows firewall>inbound rules. Right click on inbound rules and choose new rules. Click custom and click Next. Again, click on Next. From the protocol type, select icmpv4. Select ‘specific icmp types’ and then select ‘echo request’ and click ok. Click on Next. Select any ip address for both local and remote and click Next. Select ‘allow the connection’ and click Next. Then, select domain, public and private. Finally, name it and click on Finish.

Why does a client machine need to be connected to the internal network?

Note: rememeber that when you logon to the client machine, it needs to be connected to the internal network so as the GPO can take effects on it.

How to manage out on a remote computer?

Manage out means you will be able to access the remote computer from your internal network. Open the forward look up zone, and right click on the right side of the panel. Select “New Host (A or AAAA) record”. Type ‘ISATAP’ under host and type IP of the internal network card of the direct access server.

Where is the server in a DMZ?

The server can be in the edge of the network or behind a firewall in a DMZ.

How to enable remote desktop access?

Enabling remote access using Server Manager 1 Logon to Windows Server as a local administrator and open Server Manager from the desktop Task Bar or Start Screen. 2 In the left pane of Server Manager, click Local Server. 3 Wait a few seconds for the information about the local server to update in the right pane. In the Properties section of the right pane you should see the status of Remote Desktop, which is disabled by default. 4 Click on the status to change it to Enabled. The Systems Properties dialog opens on the Remote tab. Under Remote Desktop in the Systems Properties dialog, select Allow remote connections to this computer and click OK.

Can I use Remote Desktop Services on Windows Server 2012?

Sometimes I see people trying to enable the full Remote Desktop Services ( RDS) role in Windows Server, a confusion taken from earlier editions of Windows Server where there was a special remote administration mode for Terminal Services. Note: Installing Remote Desktop Services is not necessary in Windows Server 2012, and enabling remote desktop access for administration is the same process as enabling remote desktop access in Windows 8, except there is an extra entry point to the configuration via Server Manager.

How to manage remote access?

To manage Remote Web Access permissions for a user account. Log on to the Dashboard, and then click Users. Click the user account that you want to manage, and then click View the account properties in the Tasks pane. In the Properties dialog box, click the Anywhere Access tab.

How to grant access to desktop remotely?

On the navigation bar, click USERS. In the list of user accounts, select the user account that you want to grant permissions to access the desktop remotely. In the <User Account> Tasks pane, click Properties. In <User Account> Properties, click the Anywhere Access tab.

What does the setup wizard do?

When you run the Set up Anywhere Access Wizard, the wizard attempts to set up your router and Internet connectivity. After Remote Web Access is turned on, you can set up a domain name for your server and customize Remote Web Access. You can also set up the router again if you change your router.

How to change region on Windows Server Essentials?

On a computer that is connected to Windows Server Essentials, open the Dashboard. Click Settings. On the General tab, click the drop-down list in the Country/Region location of server section. From the drop-down list, select the new region, and then click Apply to accept the new region setting.

What is a domain name?

A domain name uniquely identifies your server on the Internet. Domain names consist of at least two parts: a top level domain name (TLD) and a second level domain name. For example, in contoso.com, com is the TLD and contoso is the second level domain name.

Why is Windows Server Essentials needed?

Windows Server Essentials uses a security certificate to help secure the information that is exchanged between the software and a web browser. When you install the Connector software on your computers, the security certificate for Windows Server Essentials is added to the trusted certificate list on your computers.

How to allow a user to connect to a server?

To allow a user to connect to the server by using VPN, select the Allow Virtual Private Network (VPN) check box. To allow a user to connect to the server by using Remote Web Access, select the Allow Remote Web Access and access to web services applications check box. Click Apply, and then click OK.