how to connect dvr for remote access

• Make sure that your Modem is connected to the internet. Usually modems will have a series of lights on the front which are status lights to let you know that ...
• Connect your modem to the internet port on your router. Usually your router will have one port for the internet connection. ...
• Connect your DVR to one of the data ports of your router. Most routers come with at least 4 ports for hardware that will be connecting to the internet. ...
• Connect your DVR to your monitor. This can be done using any of the methods available depending on the type of monitor you are using and DVR outputs available. ...

Full Answer

How do I connect to my DVR from a computer?

How do I connect my computer to my DVR hard drive? Connect the DVR hard drive to your computer with power and SATA data cables (you may use a SATA to USB adapter). Start the computer and boot to the GParted CD (you may need to change the boot device order in BIOS, or you could just make sure your OS drive is unplugged).

How to connect to your DVR over the Internet?

• Check if you have an internet connection. ...
• Once verified, you can start plugging in the hardware, connect the monitor, internet, and security cameras in your DVR.
• Turn on the DVR. ...
• After logging in, you’ll get to access the main menu where you can tweak some options. ...
• Make sure the DVR has a unique IP Address for its network. ...

More items...

How to configure your DVR for remote access?

Please follow these setup instructions to setup remote Internet access for the dual codec JPEG DVR:

• Assign your DVR an IP Address.
• Connect to your DVR on your LAN - Local Area Network.
• Setting up Port Forwarding on your Router.
• Setting up a Static DHCP IP address for your DVR.
• Remote Internet Setup.

How do I access my Honeywell DVR remotely?

Honeywell has announced new mobile remote access capability ... Please contact your local Honeywell or ADI-Gardiner representative. Click here then select your region for more information. Read this market profile to see the DVR in use.

How to access DVR from outside network?

What is the IP address of a DVR?

How to know if your DVR is on the same network as your home network?

What happens if you assign an IP address to a DVR?

How to find out if an IP address is being used by another device?

Can I access my DVR from my router?

See more

How can I access my DVR from my phone?

0:316:00How to connect to a DVR using an Android Phone - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first information you have to get is the internal IP of your DVR. The TCP port of the DVR. AndMoreThe first information you have to get is the internal IP of your DVR. The TCP port of the DVR. And the username and password to. Start we're going to click this icon right here on the top left corner.

How do I connect my DVR to the internet wirelessly?

0:102:02CCTV Tutorial How to connect DVR & NVR to WiFi - YouTubeYouTubeStart of suggested clipEnd of suggested clipOption you need to enable the dhcp. Click on apply once you click on apply click on search option toMoreOption you need to enable the dhcp. Click on apply once you click on apply click on search option to scan your network.

How do I find the IP address for my DVR?

0:152:10How to check the IP address of your NVR or DVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical passwordMoreSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical password log in. And go to network then go to tcpip. Under network and tcp it'll give you an ip address.

How do I connect my DVR to my network?

12:0520:13How To Connect Your Digital Video Recorder (DVR) To The InternetYouTubeStart of suggested clipEnd of suggested clipSo the first thing you're going to want to do is log into your router. So that you can change theseMoreSo the first thing you're going to want to do is log into your router. So that you can change these settings. And most of the routers are going to have a default IP. Address of 192.168.

Does DVR have WiFi?

Most of the video surveillance DVRs on the market only have a wired LAN port. There's no built-in WiFi built into almost all of these devices on the market. They are meant to be hardwired.

Can I connect my DVR to my laptop?

Connecting a Digital Video Recorder to a computer requires a cable equipped with HDMI (High Definition Media Interface) cables on both ends, or an HDMI connector on one end and RCA-type audio/video jacks or a USB connector on the other end, depending on the available connection pots on the DVR.

Does a DVR have an IP address?

If you are unsure of what your DVR LAN IP address is, you can find this by accessing the Network Setup menu from the DVR. Press the 'Setup' button. Enter the system password and press 'Enter'. Select 'System Setup' and press 'Enter'.

What is the port number for DVR?

On the router the DVR is connected to, you may set port forwarding for the DVR's local IP address and port 7000 (HTTP port) & 7001 (media port) of the DVR. Port forwarding will allow for direct outside internet access to the DVR.

How can I view my CCTV from anywhere?

How to view your IP camera remotely via a web browserFind your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.After you change the port, you will need to reboot the camera in order to save the changes.More items...•

Why can't I see my CCTV remotely?

What to Do If You Cannot Remotely View Security Cameras Using the Internet via Port Forwarding. Make sure your cameras are connected to the network. Ensure all the ports of the network configuration are mapped to the Internet. Open the firewall in the router to allow Internet access to the camera.

Can I connect my Swann DVR to the Internet wirelessly?

Going wireless on the network connection lets you choose more secretive spots to hide your DVR/NVR, as it no longer needs to reach the router via cable, making your video evidence more secure.

How do I connect my Lorex DVR to the Internet wirelessly?

0:121:59How To Set Up Lorex Wi-Fi Connected Wireless Home or Baby ...YouTubeStart of suggested clipEnd of suggested clipStep is to power the camera and turn it on second step is to plug the ethernet cable from yourMoreStep is to power the camera and turn it on second step is to plug the ethernet cable from your router to the Wi-Fi cradle. The next step is to power the Wi-Fi cradle by plugging in the power.

How do I connect my wireless IP camera to my DVR?

Here's what you will need to follow this guide: PoE switch - to power the IP cameras. Router - to network the cameras and the DVR on the same local network....Connect IP cameras to PoE Switch.Configure DVR to your network.Configure cameras to your network.Add cameras to the XVR using its menu interface.

Why is my DVR not connected to network?

If you have connected your DVR / NVR to your network router and it is not getting an Internet connection, or a valid IP address, check your Ethernet cable connection, router port settings, or DHCP / IP settings.

What port is remote viewing on a DVR?

As you can see, now it's possible to use the DVR remote viewing feature using a web browser (port 8080) or a software (port 37777).

What is the default port for a DVR?

Go to the DVR's network menu and check which port is used for software. Let's say you are using a Dahua DVR, the default port is 37777 or if you are using a Hikvision DVR the default port is 80000. Make sure to check your DVR. Open your web browser again and use the port for the configuration.

How to find my router's IP address?

From your laptop (or PC) just open a web browser and type the IP address of your router. It should pop-up a screen asking for the username and password.

Can you use the same principle to configure IP cameras for remote viewing?

You can use the same principle to configure IP cameras for remote viewing.

Can you add videos to your watch history?

Videos you watch may be added to the TV's watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

Can you configure a router?

As long as you have the necessary information you can configure the router.

How to connect to DVR?

Connect to Your DVR Internally Using Internet Explorer. You should now be able to connect to your DVR internally within your network. This is a bit different from connecting to it externally. You will use the Static Internal IP Address and Port number that you configured on your DVR in order to do this.

How to connect to DVR from outside?

When you have the ability to connect from outside of the network you are in, type in your Public IP Address into the URL bar on Internet explorer and make sure to add the ‘:88’ at the end. You should see the ActiveX web service prompt. If you are able to connect to the DVR internally but are unable to once you are outside of that network, it will more than likely be a port forwarding issue. Check your settings and try again.

How to log into my router?

Log in to your router using the gateway IP address and username and password that has been set to it. By default, most routers have their default gateway IP address set to 192.168.1.1. This is what you will type into the URL bar of your browser. Once you put that in and hit Enter, a window should pop up asking you to log in. If you haven’t made any changes you should be able to put ‘admin’ into the username and ‘admin’ into the password field as well. Some Routers may have their password defaulted to ‘password’. You will have to check your router manual or with your network administrator to be sure. You can also search on Google to find out the defaults.

How to connect to the internet on a router?

Connect your modem to the internet port on your router. Usually your router will have one port for the internet connection. This port is usually away from the other ports on the back of the router which are for the devices which will be connecting to the internet. Use a cat5 cable for this connection.

How to connect to DVR externally?

In order for you to connect to your DVR internally or externally within your network, you’re going to have to make sure that your browser is able to download the web service from the DVR. Just go to Tools > Internet Options > Security. IE Tools Menu. In this tab, you will see a button that says Custom Level.

What is the HTTP port for DVR?

HTTP PORT: 88 (You can use port 80 but there are some Internet Service providers which block the use of port 80. I usually just change it to be on the safe side.) DVR Network Settings Menu. Configure Your Browser’s Security Settings In Order To Download the DVR Web Service.

How to port forward a DVR?

Forward the Ports. Find the window or tab that is either called ‘port forwarding’ or ‘apps and gaming’. Go ahead and add a new port forwarding rule. The application name field is where you will put in anything you want that is descriptive to the device you’re port forwarding. In this case you can just put in “DVRWEB” to signify the DVR Web Service connection. External Port can be 88 (or whatever port you set it to on step 2), Internal Port is also set to 88, Protocol will be ‘both’ tcp/udp and the Device IP will be the IP of the DVR. In this case you will make sure it’s ‘192.168.1.110’. Make sure the rule is enabled by checking the box if there is one and save the rule. Then do the same for your TCP And UDP ports that were set on the DVR.You should have:

How to Configure DVR For Remote Viewing

Typically, configuring a DVR for remote viewing is both an easy and complicated process. Why do we say this?

Method One: Configure DVR for Remote viewing through Cloud

Overall, this is the simplest and most common way as you just need to scan a QR code embedded on the top or back of the DVR. You’ll find it with popular CCTV brands like ZOSI and Lorex that have their own mobile application, though others use apps from a third party.

Directions

In this setup, we’re assuming you have already hooked up your DVR to your router using an Ethernet cable.

Method Two: Configure DVR for Remote Viewing through Port Forwarding

In this method, you should be able to configure any DVR for remote viewing. That includes even the non-branded models, considering the system does have client/ management software and web browser compatibility. Why is that?

What You Need

Router’s Gateway IP address: open the command prompt on your PC and type “ipconfig”

Why is my DVR not working?

Other WiFi adapters will not work because your DVR is not capable of downloading the necessary drivers that other WiFi adapters need.

Can a DVR be viewed online?

In order for the DVR to communicate with an internet connection so that the DVR interface can be viewed online or from a smartphone, the DVR must be connected to a router.

Does the Netgear WNCE3001 work on WPS?

The Netgear WNCE3001 will work on both WPS routers and non-WPS routers . You will still need a router connected to an active internet connection. This device will not connect your DVR with 3G or 4G networks, and it cannot connect your DVR to your neighbor’s unsecured WiFi network.

What happens when you install a security camera?

After installing your security camera system, one of the first walls you might find yourself running into is getting your camera feed pulled up on your internet browser. Assuming you've connected your DVR/NVR to your network correctly, this is a pretty simple issue to fix. Continue reading →

What is dynamic DNS?

Dynamic DNS: An Explanation & How To Accommodate It. A dynamic DNS can cause you quite a headache down the road after installing a CCTV security camera system. For that reason, it's better to deal with it right away than wait until it becomes a major problem for you.

How to access DVR from outside network?

The default username is admin and the password is admin. Click login, then you will see the page of your Web Service. To access the DVR from outside the network or externally, the steps will be the same but the IP address will be your external IP address.

What is the IP address of a DVR?

By default ALL of our recorders and IP cameras have the same IP address. The default IP address is 192.168.1.108.

How to know if your DVR is on the same network as your home network?

First, you must review your network scheme to identify if your DVR or IPC (IP camera) is within the same network scheme as your Home/Office Network. There are a few ways to identify your network by simply going to the “Command Prompt” in your Windows PC.

What happens if you assign an IP address to a DVR?

This is due to the fact that if you assign an IP address to the DVR, NVR or IP camera that is already being used by a computer (hard wired or wireless), printer, or even a wireless handheld device you will have a collision in your network and you will not be able to access the device. In the next step I will show you how to see what IP addresses are available for you to use with your Digital Video Recorder.

How to find out if an IP address is being used by another device?

To find out if an IP address on your network is being used by another device, you can simply “ping” the IP address in mind and see if you get a reply back.

Can I access my DVR from my router?

Make sure you access the DVR while you are not inside the location as the DVR, due to the fact that many routers will not allow you to access internal devices from within the network using the external IP Address. I hope these steps will guide you through setting up your Network devices and DVR for remote access.