Enable Windows Server 2008 R2 Remote Desktop Services
- On the Windows® Server 2008 R2 computer, click Start > Administrative Tools > Server Manager. ...
- Click Roles, and then click Add Roles. ...
- Select Remote Desktop Services, and then click Next. ...
- Select the Remote Desktop Session Host and Remote Desktop Licensing check boxes. ...
- Click Next. ...
- On the Windows ® Server 2008 R2 computer, click Start > Administrative Tools > Server Manager. ...
- Click Roles, and then click Add Roles. ...
- Select Remote Desktop Services, and then click Next. ...
- Select the Remote Desktop Session Host and Remote Desktop Licensing check boxes.
How do I enable remote desktop on my server?
On the right side of your Server Manager window, you will see a link to Configure Remote Desktop under Computer Information. Click on this link to view your Remote Desktop settings. Normally, all servers have Remote Desktop enabled for all users.
How to provide users with remote desktop and application access?
To provide users with remote desktop and application access through Remote Desktop Services, open Control Panel -> System and Security -> System -> Remote settings and click on the Select Users button to invoke the Remote Desktop Users dialog illustrated in the following figure: <google>ADSDAQBOX_FLOW</google>
How does the remote desktop client detect RD Gateway settings?
By default the Remote Desktop Client is configured to automatically detect RD Gateway settings. When the Remote Desktop Client is exited by pressing the 'X' on the control panel the remote session continues to run on the server even though no client is connected.
How do I end a remote desktop session?
To end the session select Start in the remote desktop session, click on the right arrow button in the bottom right hand corner of the menu and select Log Off. This will close down the remote desktop session and close the remote desktop client.
How do I enable remote access to a Windows server?
Allow Access to Use Remote Desktop ConnectionClick the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•
How do I enable remote access permission?
Click Start, point to Administrative Tools, and then click Active Directory Users and Computers. Right-click the user account that you want to allow remote access, and then click Properties. Click the Dial-in tab, click Allow access, and then click OK.
How do I enable Remote Desktop Services?
Set up the PC you want to connect to so it allows remote connections:Make sure you have Windows 10 Pro. ... When you're ready, select Start > Settings > System > Remote Desktop, and turn on Enable Remote Desktop.Make note of the name of this PC under How to connect to this PC.
How do you check RDP is enabled or not?
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server and to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services.If the value of the fDenyTSConnections key is 0, then RDP is enabled.If the value of the fDenyTSConnections key is 1, then RDP is disabled.
How can I access a server from outside the network?
Use a VPN. If you connect to your local area network by using a virtual private network (VPN), you don't have to open your PC to the public internet. Instead, when you connect to the VPN, your RD client acts like it's part of the same network and be able to access your PC.
Why is Remote Desktop not working?
The most common cause of a failing RDP connection concerns network connectivity issues, for instance, if a firewall is blocking access. You can use ping, a Telnet client, and PsPing from your local machine to check the connectivity to the remote computer. Keep in mind ping won't work if ICMP is blocked on your network.
How can you Install enable and configure remote access services on server?
Install the Remote Access roleOn the DirectAccess server, in the Server Manager console, in the Dashboard, click Add roles and features.Click Next three times to get to the server role selection screen.On the Select Server Roles dialog, select Remote Access, and then click Next.Click Next three times.More items...•
What permissions do remote desktop users have?
By default, the Remote Desktop Users group is assigned the following permissions: Query Information, Logon, and Connect.
How do I allow remote desktop connection to a domain user?
To allow domain users RDP access to the domain joined Windows instances, follow these steps:Connect to your Windows EC2 instance using RDP.Create a user. ... Create a security group. ... Add the new users to the new security group.Open Group Policy Management. ... Expand your delegated OU (NetBIOS name of the directory).More items...•
How can I remotely access another computer over the Internet?
To remotely access another computer within your network over the internet, open the Remote Desktop Connection app and enter that computer's name, and your username and password. Click the magnifying glass icon in the bottom-left corner of your screen. Do this from the computer you want to access over the internet.
What is Server Manager 2008 R2?
Server to server – Server Manager on a full installation of Windows Server 2008 R2 can be used to manage roles and features that are installed on another server that is running Windows Server 2008 R2.
Can you remotely manage a server 2008 R2?
Windows Server 2008 R2, unlike Windows Server 2008 RTM, has a nice feature that allows you to remotely manage it, from another server or from a Windows 7 workstation , by using Server Manager.
Can you use Server Manager in Windows Server 2008 RTM?
Note: Windows Server 2008 RTM also has remote management capabilities. You can easily manage these servers by using almost any MMC Snap-In. However, the fact that you can use Server Manager to do it is new in R2.
How to access remote desktop settings?
To access your Remote Desktop settings, click on the Server Manager icon in the lower-left corner of your desktop next to your Start button. On the right side of your Server Manager window, you will see a link to Configure Remote Desktop under Computer Information. Click on this link to view your Remote Desktop settings.
Who has access to remote desktop?
Remote Desktop Users. Administrators have access by default.
Can you restrict remote desktop access to a few users?
Normally, all servers have Remote Desktop enabled for all users. While this works well, you may want to restrict remote desktop access to a few select users. To do this, click on the third option then click on the Select Users… button.
Where is the System Properties tab?
System Properties found in Server Manager. It defaults to the Remote tab when accessed from the ‘Configure Remote Desktop’ link on the main page.
Can you modify user access for remote desktop?
All user access for Remote Desktop can be modified from here in the future. Once you see that the user is added to the list, click OK. Note that as long as Remote Desktop is enabled the Administrator account will always have access. You can then click Apply to apply the settings to the server and OK to exit the configuration.
Planning Your Terminal Services Gateway SSL Certificate
Because clients use HTTPS to connect to the TS Gateway, the TS Gateway will need an SSL certificate — just like an electronic-commerce Web server.
Configuring the Terminal Services Gateway
To add the Terminal Services Role to Windows Server 2008, follow these steps:
Configuring the Remote Desktop Client
You must configure the Remote Desktop Client with the IP address of the TS gateway before connecting to a Remote Desktop server on your internal network. To configure the Remote Desktop Client, follow these steps:
Need More Help?
For more information about Terminal Services in Windows Server 2008, visit technet2.microsoft.com/windowsserver2008/en/servermanager/terminalservices.mspx.
How to add remote desktop services to Windows Server 2008 R2?
Windows Server 2008 R2 Remote Desktop Services may be installed from the Server Manager tool. Within Server Manager, click on Roles in the left hand pane and click on Add Roles in the resulting screen to invoke the Add Roles Wizard. If the introductory screen appears, click on Next to list the available roles. On the Select Server Roles screen, select Remote Desktop Services and click on Next to select the specific services required. For the purposes of this chapter just the basic Remote Desktop Session Host option needs to be selected (the other options will be covered in subsequent chapters):
How to switch between remote sessions?
To switch between sessions simply click on the name of the session in the left hand panel and the corresponding desktop will be displayed.
How to invoke Remote Desktop Client?
To invoke the Remote Desktop Client select Start -> All Programs -> Accessories -> Remote Desktop Connection or enter the following in the Run dialog or at a command prompt:
What happens when you exit a remote desktop session?
When the Remote Desktop Client is exited by pressing the 'X' on the control panel the remote session continues to run on the server even though no client is connected. Next time the user connects the desktop session will appear exactly as it was left before.
What is remote desktop services?
Remote Desktop Services provides both remote desktop and remote application access. Under remote desktop access an entire desktop session running on the server is displayed on the client. The user then interacts with the desktop to launch and interact with applications (details on installing applications for use with Remote Desktop Services is covered in Installing Applications for Windows Server 2008 R2 Remote Desktop Services ). In the case of remote applications, the remote application running on the server appears in its own window on the client desktop, to all intents and purposes looking like a local application to the user. Remote applications are covered in detail in Configuring RemoteApps on Windows Server 2008 R2 .
How to close a remote desktop session?
To end the session select Start in the remote desktop session, click on the right arrow button in the bottom right hand corner of the menu and select Log Off. This will close down the remote desktop session and close the remote desktop client.
How to change configuration options for each session?
To change configuration options for each session right click on the desired session in the left hand panel and select Properties. This panel has a number of tabs which enable credentials, screen size and program start properties to be defined. Having configured Remote Desktop Services on a Windows Server 2008 R2 system, the next step is to install applications suitable for remote access as outlined in the next chapter.
Question
Hi, I have a Windows 2008 R2 server running Routing and Remote access and users are using PPTP VPN's to connect to our network. I have been asked to find logs for the following for connections in to our server
All replies
I can’t sure which article you have read, but fur the 2008R2 the RAS to enable the log and the debug log in the KB is descried like this, I recommend you to try the KB mentioned method.
