how to enable routing and remote access in server 2012

^{Routing and Remote Access in Windows Server 2012 - Part 1}

1. First of all open your Server Manager. In the Server Manager you will find an option for "Add Roles and Feature" on the front page; click on it ...
2. The next page is for selecting the "Installation type." Select the first option and then click on "Next".
3. On the next page you must select the rolls to be installed. Scroll Down to the "Remote Access" and click on it.
4. The next page is for the Features, you can select any feature you want it to install or otherwise simply click on "Next" button without selecting anything like ...
5. Now comes the main part where you must select the "Roll Services under Remote Access." Select both the services i.e. "Direct Access and VPN" and "Routing".

Full Answer

How to install routing and remote access on Windows Server 2012 R2?

Follow these steps to install the routing and remote access role on Windows Server 2012 R2. Procedure Open the Windows Server 2012 Server Manager. From the Server Manager Dashboard, select Manage> Add Roles and Features. Click Nextto display the Select Server Roleswindow. Select the Remote Accesscheck box.

How do I enable or disable routing and remote access server?

You may right-click the server, and then click Disable Routing and Remote Access. Click Yes when it is prompted with an informational message. Right-click the server, and then click Configure and Enable Routing and Remote Accessto start the Routing and Remote Access Server Setup Wizard.

How do I enable remote access to a Windows Server?

Right-click the server, and then click Configure and Enable Routing and Remote Accessto start the Routing and Remote Access Server Setup Wizard. Click Next. Click Remote access (dial-up or VPN)to permit remote computers to dial in or connect to this network through the Internet.

How do I enable IIs routing on Windows?

On Role Services click the Routing checkbox. Click Add Features on the pop-up dialogue. Click Next on the Web Server Role (IIS) page. The Feature has now been added to Windows. A reboot is not necessary for this process so we will now proceed to the next part of the configuration. From Administrative Tools look for Routing and Remote Access.

How do I enable Remote Access and Routing?

Right-click the server, and then click Configure and Enable Routing and Remote Access to start the Routing and Remote Access Server Setup Wizard. Click Next. Click Remote access (dial-up or VPN) to permit remote computers to dial in or connect to this network through the Internet.

What is Routing and Remote Access server 2012?

Windows Server 2012 R2 routing/NAT functionality feature is a part of Remote Access and allows for connecting 2 networks together, allowing a Windows machine with at least 2 NICs on 2 separate networks to handle the routing between them. To install this feature complete the steps below.

How do I enable RDP on server 2012?

Open the System Properties: For Windows Server 2012 to Windows Server 2016: ... In Computer Information, click Configure Remote Desktop:In the System Properties dialog box, under Remote Desktop, click one of the following options: ... Review the information in the Remote Desktop dialog box, and then click OK twice.

What is Windows Routing and Remote Access?

Routing and Remote Access Service (RRAS) is a Microsoft API and server software that makes it possible to create applications to administer the routing and remote access service capabilities of the operating system, to function as a network router. Developers can also use RRAS to implement routing protocols.

How do I enable RRAS?

Right-click the VPN server, then select Configure and Enable Routing and Remote Access. The Routing and Remote Access Server Setup Wizard opens. In the Welcome to the Routing and Remote Access Server Setup Wizard, select Next. In Configuration, select Custom Configuration, and then select Next.

How do I install Remote Access?

Set up remote access to your computerOn your computer, open Chrome.In the address bar, enter remotedesktop.google.com/access .Under “Set up Remote Access,” click Download .Follow the onscreen directions to download and install Chrome Remote Desktop.

How do I enable RDP on my server?

Steps How to Windows Server Enable Remote Desktop (RDP)Launch the Start menu and open Server Manager. ... Click on the Local Server on the left hand side of the Server Manager window. ... Select the Disabled text. ... Click on Allow remote desktop connections to this Computer on the System Properties window.More items...•

How do I know if Remote Desktop is enabled?

Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server and to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services. If the value of the fDenyTSConnections key is 0, then RDP is enabled. If the value of the fDenyTSConnections key is 1, then RDP is disabled.

Is RDP enabled by default?

The Remote Desktop or RDP feature is disabled by default, so you will need to enable it in the settings.

How do I restart Routing and Remote Access Service?

To ensure that the service is running, type Get-Service iphlpsvc at a Windows PowerShell prompt. To enable the service, type Start-Service iphlpsvc from an elevated Windows PowerShell prompt. To restart the service, type Restart-Service iphlpsvc from an elevated Windows PowerShell prompt.

What is the use of routing and remote access service?

RRAS is a software router and an open platform for routing and networking. It offers routing services to businesses in local area network (LAN) and wide area network (WAN) environments or over the Internet by using secure VPN connections.

What is the difference between RAS and RRAS?

Microsoft Remote Access Server (RAS) is the predecessor to Microsoft Routing and Remote Access Server (RRAS). RRAS is a Microsoft Windows Server feature that allows Microsoft Windows clients to remotely access a Microsoft Windows network.

What is the use of routing and remote access service?

RRAS is a software router and an open platform for routing and networking. It offers routing services to businesses in local area network (LAN) and wide area network (WAN) environments or over the Internet by using secure VPN connections.

What is Routing and Remote Access server 2016?

RRAS stands for Routing and Remote Access Service is a feature of Windows Server operating systems family that provides additional support for TCP/IP internetworking. RRAS makes it possible to create applications to administer the routing and remote access service capabilities of the operating system.

What do you know about routing?

Routing is the process of selecting a path for traffic in a network or between or across multiple networks. Broadly, routing is performed in many types of networks, including circuit-switched networks, such as the public switched telephone network (PSTN), and computer networks, such as the Internet.

What is Remote Access control?

Remote access control refers to the ability to monitor and control access to a computer or network (such as a home computer or office network computer) anywhere and anytime. Employees can leverage this ability to work remotely away from the office while retaining access to a distant computer or network.

What is a RRAS?

If you are using Hyper-V Network Virtualization or you have VM networks deployed with VLANs, you can deploy RRAS as a virtual machine (VM)-based software gateway and router that allows Cloud Service Providers (CSPs) and Enterprises to enable datacenter and cloud network traffic routing between virtual and physical networks, including the Internet.

Is RRAS available in Server 2012?

The RRAS Multitenant Gateway is available only in Windows Server 2012 R2. It is not available in Windows Server® 2012.

How to enable remote access to a server?

Right-click the server, and then click Configure and Enable Routing and Remote Accessto start the Routing and Remote Access Server Setup Wizard. Click Next.

How to reconfigure a server?

To reconfigure the server, you must first disable Routing and Remote Access. You may right-click the server, and then click Disable Routing and Remote Access. Click Yes when it is prompted with an informational message.

How to create a group VPN?

Create a group that contains members who are permitted to create VPN connections. Click Start, point to Administrative Tools, and then click Routing and Remote Access. In the console tree, expand Routing and Remote Access, expand the server name, and then click Remote Access Policies.

How to connect to a dial up network?

If they are, see your product documentation to complete these steps. Click Start, click Control Panel, and then double-click Network Connections. Under Network Tasks, click Create a new connection, and then click Next. Click Connect to the network at my workplace to create the dial-up connection, and then click Next.

Can you grant callbacks in Windows 2003?

Administrators can only grant or deny access to the user and specify callback options, which are the access permission settings available in Microsoft Windows NT 4.0. The remaining options become available after the domain has been switched to native mode.

What is R2 routing?

Windows Server 2012 R2 routing/NAT functionality feature is a part of Remote Access and allows for connecting 2 networks together, allowing a Windows machine with at least 2 NICs on 2 separate networks to handle the routing between them .#N#To install this feature complete the steps below.

How to add roles and features to a server?

To start, from Server Manager click Manage > Add Roles and Features. On the Before You Begin page, click Next. Select Role-based or feature-based installation and click Next. On Server Selection select the server you want to install the feature on and click Next.

Where is the Routing and Remote Access menu?

Click Tools in the top right corner of Server Manager, select Routing and Remote Access from the drop-down menu.

What tab to check for remote access?

On the Logging tab, check Log additional Routing and Remote Access information (used for debugging).

How to start VPN debugging?

If you are debugging a VPN or other interface, you might want to now manually start it by right clicking the interface name and selecting Connect from the context menu. To see the list of interfaces, click Network Interfaces on the left of the Routing and Remote Access MMC.

Installing the Routing and Remote Access Role

1. Log into the server with administrative credentials 2. Open Server Manager 3. On the Dashboard, locate and click Add roles and features 4. Click Next to skip the Before you begin page 5. Choose Role-based or feature-based installation and click Next

Configure the Remote Access Role

Now that the installation is completed, we will want to actually configure the role.

How to change VPN to SSTP?

Click the Security Tab -> Change type of VPN to SSTP. By default, it detects the type of VPN automatically, but slightly slows down the process.

How to launch NPS in RRAS?

Once you’ve returned to the RRAS window, *left-click* Remote Access Logging and Policies. Then right-click and Launch NPS.

What OS is SSTP?

SSTP was introduced in Windows Vista, so the OS must be Vista or Greater ( or Server 2008 and greater). Go to Network and Sharing Center. Click Setup New Connection or Network.

Can you use NAP to access VPN?

Enter your user information. Don’t forget that if you didn’t setup a Group to access the VPN using NAP , you’ll need to enable Dial-In access within Active Directory Users and Computers for that user.

Can you skip the next section of VPN?

If you don’t want to add any additional security (IP restrictions, Group Access to VPN), then you can skip the next section and jump to setting up the client. I find it super interesting, though. I’d give it at least a glance.

Does RRAS work with IIS?

It will force you to install IIS, which is odd, because RRAS can work independently of IIS (you can even stop and disable IIS and RRAS will still work). I would think just the IIS Hostable Web Core would be enough, but whatever. It’s required. Go ahead and accept that it will be installed.