how to get remote access with geovision

Geovision IP Camera Remote Access IE. 1. First ensure that the correct ports are forwarded in your router. If you have yet to do this, please visit our Geovision IP Camera Network Setup article. 2. Now launch an Internet Explorer web browser. In the address bar, enter the Remote IP Address of your Geovision IP camera (2.1). (If your port number is anything other than 80, you will have to put the port number at the end of the IP address.

Full Answer

What is the Geovision webcam server?

The WebCam Server is an HTTP server that can be used to configure Geovision for remote access so that live video can be viewed from a web browser (Internet Explorer). Up to 200 remote clients can access a single Geovision DVR.

How do I remotely access a Geovision IP camera?

The instructions in this article will explain how to remotely access a Geovision IP Camera using an Internet Explorer web browser on a PC. This allows the user to view their camera from virtually any PC. In addition to live viewing, the user can configure the settings of the camera through the Internet Explorer web browser.

What is Geovision remote view?

The Geovision Remote View System is used to monitor live surveillance video from the main Geovision system through an Internet connection. The Remote View application is limited to only one login at a time, so multiple PCs and locations cannot connect simultaneously.

What are the software applications of the Geovision system?

These software applications are: The Geovision Remote View System is used to monitor live surveillance video from the main Geovision system through an Internet connection. The Remote View application is limited to only one login at a time, so multiple PCs and locations cannot connect simultaneously.

How do I open NVR remotely?

There are 6 steps to setting up your NVR for remote viewing:Understand Your Network.Setup DDNS.Setup A Port Forward.Assign The DDNS Hostname To Your NVR.Set Two IP Addresses For Your NVR.Verify That Local Viewing and Remote Viewing Work.

How do I connect my iPhone to geovision?

Click on the GV-iView application on your iPhone to launch. On the login screen, enter the IP address of your Geovision system (or the IP address of your Internet connection at the location of your Geovision DVR if you are using port forwarding). Also, enter the user id and password for your Geovision system.

Is geovision an Onvif?

All series of GeoVision IP cameras now support ONVIF, which has extended GeoVision's integration to 3rd-party NVR/VMS. With the release of firmware v2. 0, all series of GeoVision IP cameras are now ONVIF conformant.

How do you play playback geovision?

Geovision Surveillance DVR Video Search & PlaybackMake sure the GV-System is open and running. ... Now select the camera that you wish to view.Then select a date folder from the date tree.Choose a time from the Video Events list.Now click the button to begin the video playback. (More items...

How do I put the camera on my GV eye?

0:002:02GV-EYE - Adding Cameras - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo right now we're starting on our default. Screen here on the GBI app we'll notice that there'sMoreSo right now we're starting on our default. Screen here on the GBI app we'll notice that there's these plus symbols within the black boxes. Each one of these boxes. Is a window to add a camera.

How do I access my geovision camera?

The Geovision IP Cameras can be remotely accessed from a number of devices including iPhone, iPad, Windows, BlackBerry and Android mobile devices. In addition to mobile devices, the Geovision cameras can be accessed through PC web browsers and central management software.

Who makes geovision?

GeoVision Inc. is a manufacturer of intelligent video surveillance systems founded in 1998 in Taiwan. (Taiwan Stock Exchange Code: 3356).

How do I change the IP address on my geovision camera?

0:010:51Geovision - Configure IP Camera - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe IP address of an IP camera we're gonna start off by clicking the configure. Button. Well then goMoreThe IP address of an IP camera we're gonna start off by clicking the configure. Button. Well then go to system configure an IP camera install.

How do I export a video from geovision?

Geovision Surveillance DVR Video Export & PlaybackInsert a USB thumb drive into the USB drive of the Geovision Surveillance DVR.Then on the main screen of the GV-System, click the button. ... Now click the button on the functional panel.Select Using Hard Disk to export the files to the USB device.More items...

How do I use GV edge recording manager?

0:0010:58Edge Recording Manager End User Demo - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou today will serve as a demonstration overview of how to use the geo vision edge recording managerMoreYou today will serve as a demonstration overview of how to use the geo vision edge recording manager software. This is the software that you can put on your laptop. Or your desktop machine.

How do you save footage on geovision?

1:085:26Geovision | How to backup video footage with embedded playerYouTubeStart of suggested clipEnd of suggested clipThen you're gonna right-click. And you're gonna choose backup. So once the does that it shows me myMoreThen you're gonna right-click. And you're gonna choose backup. So once the does that it shows me my selected camera right here and it shows me the time frame and I'm just gonna click OK.

What is a GV-VMS?

GV-VMS is a comprehensive video management system that records up to 64 channels of GeoVision and/or third-party IP devices. The live view and playback layout can be easily adjusted with the intuitive drag-and-drop function. GV-VMS comes with a variety of intelligent video analytics to offer precise monitoring and to reduce the need for manual supervision. The built-in Webcam Server allows users to remotely access live view and recordings from anywhere using Web browsers, mobile app and Remote ViewLog. Compatibility with GV-CMS (GeoVision Central Monitoring Station) and interoperability with a wide selection of third party IP cameras through ONVIF and PSIA make GV-VMS a versatile and effective surveillance solution.

How many channels can you view on a GV-Edge?

To remotely view from 33 to 64 channels on the GV-Edge Recording Server (Windows version), you will need to purchase an additional license. Currently, GV-Edge Recording Server (Mac version) only supports remote connection with up to 32 channels.

Can you use a GV-Keyboard V3?

It can be either plugged into the GV-VMS for independent use or connected to GV-Keyboard. GV-Keyboard V3. GV-Keyboard V3 is used to program and operate GV-VMS and PTZ cameras. Through RS-485 configuration, it can control up to 36 GV-VMS. In addition, you can connect PTZ cameras directly to the keyboard for PTZ control.

How to access GeoVision DDNS?

1. On the left menu of Web interface, select Network and then Advanced TCP/IP. 2. Under the Dynamic DNS Server Settings, select Enable and click the Register GeoVision DDNS Server link to access GeoVision DDNS service.

How to log in to GV IP camera?

To log in the camera’s Connect your camera to a PC to log in the camera’s Web interface. By default the GV-IP Camera has the IP address of 192.168.0.10, and ID and password are

How to allow access to IP cameras on LAN?

To allow access to the IP cameras residing on the LAN, you need to assign a different port to each camera and open the corresponding ports on the router. Let’s imagine the public IP address of the router is like a building’s address, and ports are like the apartment numbers for the residences in the building.

How to enable Internet connection on TV modem?

If you are a TV-cable modem user, you don’t need to dial-up every time when you want to log on because the connection is always on. 1. On the left menu of the Web interface, select Network and then LAN. 2. Select Dynamic IP address. 3. Click Apply to enable the Internet connection.

What is the HTTPS port on a GV IP camera?

When the HTTPS port is enabled on the GV-IP Camera and the router, you will securely access your camera using a HTTPS URL that starts with https:// , instead of using HTTP URL that starts with http://.

How to maintain one IP address to reach camera?

To maintain one address to reach your camera, you may use Dynamic DNS service to obtain a domain name, such as geoipcamera.dipmap.com. The Dynamic DNS service will redirect the ever-changing IP address of your camera to the domain name.

What is the default streaming port for GV-IP cameras?

The default streaming port for every GV-IP Camera is 10000.