Here’s the process:
- 1. Open the Plex Web App and login with your credentials
- 2. Head over to Settings > Server > Remote Access
- 3. Click the Show Advanced option to see more options
- 4. Enable the Manually specify public port checkbox
- 5. Enter the WAN/External Port previously used
- 6. Use the Retry or Apply button
- Open Plex Web App and make sure you're signed in to your Plex account on the server under Settings > Server > General.
- Go to Settings > Server > Remote Access.
- If needed, toggle the Show Advanced button to ensure the appropriate options are visible.
- Enable the Manually specify public port checkbox.
How do I change the port on my Plex server?
This will take you to the Plex settings menu. Look at the menu choices on the left side of your screen and click on Remote Access. You may have to click the Show Advanced button. Find and check the checkbox to manually specify the port. Make sure the number is correct.
How do I set up remote access on Plex web app?
Open Plex Web App and make sure you’re signed in to your Plex account on the server under Settings > Server > General Go to Settings > Server > Remote Access If needed, toggle the Show Advanced button to ensure the appropriate options are visible Enable the Manually specify public port checkbox
How do I connect to Plex from outside my network?
In order to have a direct connection from outside your network to Plex, you may need to forward a port in your router. After you forward a port in your router, you will then need to specify the port forward in Plex. In order to specify the port forward in your Plex server, you will need to access the port forwarding settings.
What ports do I need to know for Plex?
UDP port 32410, 32412, 32413, 32414 for network discovery You shouldn’t really need to know the ports as Plex takes care of everything.
What ports need to be open for Plex Media Server?
The most important port to make sure your firewall allows is the main TCP port the Plex Media Server uses for communication: TCP: 32400 (access to the Plex Media Server) [required]
How do I enable remote access to Plex server?
Enable access to your Plex Media Server from outside your local network so that you can reach it when away from home or for sharing content with family or close, personal friends. You can do this under Settings > Server > Remote Access in Plex Web App.
Do I need port forwarding for Plex?
To make the most of Plex and get direct access to Plex's servers, you will need to set up port forwarding on your router.
How do I access Plex server from another computer?
To open the Plex Web App from a different device than the server computer while still on the same network: Open a browser window. Type http://server.local.ip.address:32400/web into the address bar (e.g “http://192.168.1.5:32400/web”) The browser will connect to the server and load Plex Web App.
Is Plex a UPnP media server?
Plex Media Server generally works, by the magic of UPnP, right out of the box.
How do I change my Plex port?
1:2812:15Plex - How to Port Forward - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou're going to click on the left hand side connect. Click show advanced and you're going to seeMoreYou're going to click on the left hand side connect. Click show advanced and you're going to see your connection settings here and you have an option to manually specify a port or do set it up
How do I setup port forwarding?
To forward ports on your router, log into your router and go to the port forwarding section. Next, enter the port numbers and your device's IP address. Choose a forwarding protocol and save your changes. Note: If you don't see a port forwarding option in your router's settings, you might have to upgrade.
Do you need Plex pass for remote access?
It's not true. All users can stream remotely providing you've configured your Plex Server correctly. Head to Settings > Remote Access > Enable Remote Access to set it up. In this regard, the Plex Pass is only useful if you're going to be in a place with no internet—it lets you save content directly onto your device.
Do you need Plex Pass for remote access?
It's not true. All users can stream remotely providing you've configured your Plex Server correctly. Head to Settings > Remote Access > Enable Remote Access to set it up. In this regard, the Plex Pass is only useful if you're going to be in a place with no internet—it lets you save content directly onto your device.
Why can't I access my Plex server?
Verify that your Server is listed on your Devices page. Disable any VPN on your computer or router. Disable any proxies being used on your computer or router. Make sure you aren't requiring secure connections on the server while using an app that doesn't support them (see below)
How do I share Plex with family?
Enter the username or email address of the person you want to share your library with, and click on the user when it pops up. In the next window, choose which libraries you share with others. To share all of them, select your server and click Save. Or select only the libraries you want to share, then click Save.
How do I use my phone as a remote for Plex?
An Android, Windows Phone 8, BlackBerry or Java mobile device....Setup is quick and simple!Step 1: Install Vectir PC Server. ... Step 2: Install Vectir Mobile Client App. ... Step 3: Install Plex Remote Profile. ... Step 4: Connect and control Plex!
What port do you forward plex media server to?
If you are manually forwarding a port, set that forward up beforehand and make sure you know the external port number which you are forwarding (remember that you need to forward the external port you choose to internal port 32400 for the internal IP address of the device running Plex Media Server)
What to do if remote access is disabled?
If Remote Access is currently disabled, then use the Enable Remote Access button to trigger your server to try to configure a connection. The server will attempt to automatically configure a connection through your router using UPnP or NAT-PMP first.
What happens if you manually forward a port in your router?
Note: If you manually forward a port in your router then you MUST enable this setting or else your server will continue to try and automatically map the port and will almost certainly fail.
How fast can you upload a stream?
For instance, you might decide that you don’t want any individual remote stream to go over 4 Mbps, even if you have a higher total internet upload speed and allow multiple streams.
Does Plex Media Server allow remote access?
The information displayed by default will depend on the current state of the Plex Media Server. Unless disabled, your Plex Media Server will attempt to set up Remote Access for you.
Can you manually specify port forwarding?
If the automatic port configuration for connecting to plex.tv fails (or if you otherwise simply prefer to set up your port forward manually), you can manually specify the port using this setting. Our “Troubleshooting” article (linked below) has more details about how to set up a manual port forward.
Does Plex Media Server require a Plex Pass?
Tip!: This feature requires an active Plex Pass subscription for the Plex Media Server admin Plex account.
How to connect to Plex from outside?
In order to have a direct connection from outside your network to Plex you may need to forward a port in your router. After you forward a port in your router, you will then need to specify the port forward in Plex.
What is the default port for plex?
Make sure the number is correct. The default Plex port is 32400. Click the Apply button.
Where is the wrench on plex?
Next, click on the wrench which you will find on the navigation bar at the top of the screen. This will take you to the Plex settings menu.
How to use plex port forwarding?
To do so: Open Plex Web App and make sure you’re signed in to your Plex account on the server under Settings > Server > General. Go to Settings > Server > Remote Access.
What port is plex media server?
Forward that unique external port number to LAN/internal port 32400 for the local IP address of the corresponding computer running that Plex Media Server – follow the previous instructions
Why is Plex blocking my network connection?
In some cases, you may have a firewall or something else on your computer/network that may be blocking a network connection that’s required for Plex and your server to test whether Remote Access is working correctly for you. This is most likely to occur for users running “advanced” firewalls, such as pfSense or similar.
What is the default port for WAN?
WAN/External Port: Port 32400 (TCP) is default, but you can generally use any available port in the 20,000 to 50,000 range.
Where to find my router's WAN/Internet/External IPv4 address?
Find your router’s WAN/Internet/External IPv4 address. This is usually found on a “status” page in the router settings.
How to get my internet to bridge mode?
The best solution here is usually to contact your internet service provider and ask them to assist you with setting their modem/router to Bridge Mode.
Does plex.tv work with uPnP?
Enabling Remote Access to connect your server with plex.tv works best with modern routers that support uPnP or NAT-PMP auto-configuration. These allow an application like Plex Media Server to automatically configure a forwarded port on the router without you needing to do anything. Not all routers have these protocols, and some have implementations that don’t work so well. If enabling Remote Access isn’t successful for you automatically:
How to set up remote access on Plex?
Now that you've locked in your Plex server's IP address and set up port forwarding, you can configure your remote access settings on your Plex server using the following instructions: Click "Settings" in the Manage section. The Settings screen appears. Click "Server" in the upper right corner of the Settings screen.
How to reserve IP address for Plex?
Here are the instructions for how to reserve an IP address for your Plex server in a Netgear router: Open your Web browser and navigate to routerlogin.com. This is the portal for your Netgear router. Click the "Advanced" tab on the home page, and then click "Setup" beneath WPS Wizard on the left side of the screen.
How to set up a 32400 port?
Click "Server" in the upper right corner of the Settings screen. Click "Remote Access" on the left side of the screen. Click the orange "Enable Remote Access" button on the right side of the screen. Click to place a check mark to the left of Manually Specify Public Port, and then enter "32400.". Click the orange " Retry" button to the right ...
Can you use Plex Media Server from home?
Remote access is disabled by default, and if the feature doesn't turn on when you initially enable it, you'll need to configure some settings on your router before you can access content on your Plex Media Server from outside of your home network.
Can you remotely access Plex Media Server?
Remote access is disabled by default, and if the feature doesn't turn on when you initially enable it, you'll need to configure some settings on your router before you can access content on your Plex Media Server from outside of your home network.
What port does plex use?
What port does Plex Media Server use to stream? 1 TCP port 32400 for the Plex Media Server 2 UDP port 1900 for the Plex DLNA Server 3 TCP port 3005 for Plex Companion 4 UDP port 5353 for network discovery 5 TCP port 8324 for Roku via Plex Companion 6 UDP port 32410, 32412, 32413, 32414 for network discovery 7 TCP port 32469 for the Plex DLNA Server
What port does Plex Media Server use to stream?
Depending on your network, you may need to manually open or forward ports to allow remote devices to access Plex Media Server. If you’re having connection issues, make sure the following ports are available through your firewall or forwarded through your router.
How to use Plex on a computer?
Download and install the Plex Media Server and the Plex app. Install the media server onto the computer or network storage device you intend to use. Install the Plex app on the device (s) you want to use to view content.
How to watch Plex from anywhere?
To be able to do that, we first need to enable it. Log into Plex. If you enabled remote access above, skip the next step. If you didn’t enable remote access during setup, select Settings in the top right.
What is Plex Media Server?
Plex Media Server is the work of genius. It collates multiple content libraries and streaming services and allows access to all of them through a single app. Stream from multiple sources to multiple devices, all for free. Once set up, the system is very easy to use but getting it set up can be a bit of a pain.
How to organize media in Plex?
Organize your media by setting up a logical folders, Movies, TV and Music and so on. Place your media inside the corresponding folder, preferably within its own folder so Plex can list them logically. To set up Plex Media Server: Set up a Plex account.
Do you need to know the ports on plex?
You shouldn’t really need to know the ports as Plex takes care of everything. When you fire up your Plex Media Server, your firewall should flag new traffic and give you the option to allow or disallow. As long as you set it to allow Plex traffic, you should have no further configuration to do.
How to port forward on Plex?
First, let’s turn on the manual port mode in Plex. To do so navigate to Settings > Server > Remote Access (as we did in the previous section of the tutorial).
How to check if Plex is disabled?
While logged into your Plex Media Server’s web control panel, select the Settings icon from the upper right toolbar. Within the Settings menu select, the “Server” tab.
How to set up static IP address on Plex?
You’ll need to identify your Plex Media Server computer on the network and then look for an option in your router to create a “static IP”, “static lease”, or “DHCP reservation” to permanently associate the Plex Media Center with a given IP address. Below you can see an example of what adding a static IP address looks like, via our DD-WRT router.
What does the control panel indicate on Plex?
In addition to telling you that the server is accessible, the control panel will also indicate the internal IP address and port number of the Plex Media Server on your local network as well as external, or public, IP address and port number.
Can you use Plex Media Server on a TV?
If you primarily use Plex Media Server for watching content on your local network (like streaming your favorite shows to your HDTV or smartphone), you may not have given much though to the benefits of remote access. RELATED: How to Set Up Plex (and Watch Your Movies on Any Device)
Can you watch Plex on your phone?
One of the greatest things about the Plex Media Server platform, however, is the ease with which you can access your media from anywhere. With remote access enabled and properly configured, you can watch your favorite TV shows anywhere you have internet access: on your phone while you’re sitting in a waiting room, on your laptop while you’re vacationing, or even on a smart TV at a friend’s house.
Can you disable remote access on Plex?
During the initial setup of the Plex Media Server, the setup wizard prompts you to enable or disable remote access. While the default state is enabled, you may have opted at the time to disable remote access, or perhaps you inadvertently disabled it while messing around with the system settings later on. Regardless, it’s easy enough to check the status of remote access and enable it if it is currently disabled.
What is Plex
When we talk about Plex we refer to an application that we can install on our devices. Its mission is to allow us to centralize multimedia files in one place. For example movies and series and be able to watch them from another device.
How to configure Plex to enter from the Internet
This function will allow us to connect to our Plex server from anywhere , simply by having access to the Internet. We will not have to pay anything additional and it is an option that undoubtedly expands the possibilities of only limiting ourselves to having access from the local network.
Why access Plex remotely
We have explained how we can access Plex remotely and view all the content. However, you may be wondering what this feature is really for or how it improves to, for example, storing videos directly in a memory.
