- Set up WebDav on Synology NAS device.
- Assign a Static IP Address on Synology NAS.
- Obtain a Free Domain Name using a DDNS Service.
- Setup Port Forwarding on your Router.
- Set up DDNS on Synology NAS Device.
- Map Synology Shared Drive in Windows Explorer.
How to enabled Synology Internet access?
- Make sure your Synology NAS and computer are properly connected to the Internet. ...
- Make sure your Synology NAS and computer are located on the same local area network and subnet.
- If DSM is still accessible, go to DSM > Control Panel > Info Center > Device Analytics > Share Network Location and tick the Enable Web Assistant checkbox.
How to remotely access your Synology NAS using QuickConnect?
What methods are available to remotely access my Synology NAS?
- Creating a customized ID or address with QuickConnect.
- Setting up a hostname for the IP address of your NAS using DDNS.
- Mapping a port on your router to the IP address of your NAS using port forwarding.
How to connect Synology NAS directly to PC without router?
- Put the Mellanox cards in your PC and Synology. Make sure all drivers etc are installed.
- Connect to the Synology. ...
- On the PC- open up the network interface properties for your 10gig card. ...
- Now plug the 10gig line between the Synology and the PC. ...
- With both of these set, now connect to \192.168.50.50 (or whatever IP you set in Step 2). ...
How can I access my Network remotely?
Windows 10 Fall Creator Update (1709) or later
- On the device you want to connect to, select Start and then click the Settings icon on the left.
- Select the System group followed by the Remote Desktop item.
- Use the slider to enable Remote Desktop.
- It is also recommended to keep the PC awake and discoverable to facilitate connections. ...
See more
How do I map a Synology drive in Windows?
Synology AssistantClick on This Computer.Click on your Synology NAS.Click on Map Drive.Enter your NAS credentials.Select the Shared folder to map as a drive.Select an available drive letter. Tip: Check the "Reconnect at login" box to have the drive automatically mounted at boot.Click on Finish.
How do I access Synology NAS remotely in Windows Explorer?
2.1 For WindowsDownload, install, and open NetDrive.Click the Connect button next to WebDAV.Enter the following information: Type: Choose WebDAV from the drop-down list. ... Click Save to save the settings.Click Connect.Now you should be able to see the shared folders on your Synology NAS in Windows Explorer.
How do I access my Synology shared folder remotely?
Using CyberduckDownload, install, and launch Cyberduck.Click Open Connection.Select WebDAV (HTTPS) from the drop-down menu.Enter the following information: Server: Enter the IP address or the hostname of your Synology NAS. ... Click Connect. Now you should see the shared folders on your Synology NAS appear in Cyberduck.
How do I map a network drive in Windows 10 remotely?
To map a network drive from the remote client workstation:On the remote client workstation, start Windows Explorer.On the Tools menu, click Map Network Drive.In the Drive list, select the drive to which you want to map the location of the code server.In the Folder field, specify the location of the share as follows:More items...
How do I access files from Synology NAS within local network Windows?
1:154:15How to Access Files on Your Synology NAS via Windows File Explorer or ...YouTubeStart of suggested clipEnd of suggested clipOpen file explorer and select this pc. Click computer click map network drive select the driveMoreOpen file explorer and select this pc. Click computer click map network drive select the drive letter you want to use for the network folder in the folder.
How can I access my NAS from Windows?
Follow the steps below:Open File Explorer, then select This PC.Click the Computer tab on the upper part of the windows.Click Map network drive.Select a drive letter you want, then click Browse.Navigate to your NAS drive, then click OK.Confirm your selection, click Finish.
Can you access Synology NAS from outside network?
Synology has a very easy feature called 'QuickConnect'. It allows you to easily access your NAS from outside your network. You can access your photos and documents anytime, anywhere in the world. Once you've followed this step-by-step plan, all you need is a working internet connection.
How do I remotely access a NAS file?
How to Remotely Connect to Your DeviceStep 1: Enable FTP.Step 2: Enable WebDAV.Step 3: Update User Permissions.Step 5: Use Dynamic DNS to Assign a Web Address to Your Home Network.Step 6: Set Up Your Remote Connection.Step 7: Enter and Save Your Password.More items...•
Why can't I access my Synology NAS remotely?
For Synology NAS. Check if QuickConnect is enabled. For DSM 6.2: Go to Control Panel > QuickConnect and ensure the Enable QuickConnect checkbox is ticked. Afterward, confirm the services you wish to access via QuickConnect are enabled at the Advanced tab.
How do I map my Synology NAS over the Internet?
How to Configure and Access Synology NAS with WebDAV over Internet.Set up WebDav on Synology NAS device.Assign a Static IP Address on Synology NAS.Obtain a Free Domain Name using a DDNS Service.Setup Port Forwarding on your Router.Set up DDNS on Synology NAS Device.Map Synology Shared Drive in Windows Explorer.More items...
How do I access a network drive remotely?
To learn how to access a network drive remotely, open File Explorer on your computer. Right-click “Network” and then click “Map Network Drive” from the menu that pops up. Then select a letter to assign to the drive, tell your computer where the folder is, and whether to connect at sign-on.
How do I map a network drive using command prompt?
0:131:28How to Map Network Drive using Command Line - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd type CMD press ok now we're gonna use the net use command. Now type net space use the driveMoreAnd type CMD press ok now we're gonna use the net use command. Now type net space use the drive letter that you wish to add to the map network drive backslash backslash the computer name backslash.
How do I access my NAS remotely?
How to Remotely Connect to Your DeviceStep 1: Enable FTP.Step 2: Enable WebDAV.Step 3: Update User Permissions.Step 5: Use Dynamic DNS to Assign a Web Address to Your Home Network.Step 6: Set Up Your Remote Connection.Step 7: Enter and Save Your Password.More items...•
How do I connect to a server in file Explorer?
Connect to a file serverIn the file manager, click Other Locations in the sidebar.In Connect to Server, enter the address of the server, in the form of a URL. Details on supported URLs are listed below. ... Click Connect. The files on the server will be shown.
How do I access my Synology files from the Internet?
Access your Synology NAS over the Internet and share filesSet up QuickConnect. Go to Control Panel > QuickConnect. ... Share files on your NAS using QuickConnect. With QuickConnect enabled, you can easily share files stored on your Synology NAS to anyone without worrying about port forwarding.
How do I make Synology NAS visible on network?
If your Synology NAS is running DSM 6.2 or above, or your computer is running Windows Vista or later, tick the Enable Windows network discovery to allow file access via SMB checkbox at one of the following locations in DSM: For DSM 7.0: Control Panel > File Services > SMB tab > WS-Discovery.
How to enable SMB on Synology NAS?
On your Synology NAS 1 Make sure that Enable SMB service is ticked at the following locations: 2 For DSM 7.0: Control Panel > File Services > SMB > SMB. 3 For DSM 6.2: Control Panel > File Services > SMB/AFP/NFS > SMB. 4 In Control Panel > Security > Firewall > Edit Rules, make sure that your firewall rules allow traffic on network ports used by Windows file server (i.e., ports 137, 138, 139, and 445). 5 Make sure that your user account has Read/Write or Read only permissions for the shared folder that you want to map as a network drive. Refer to this article for more details. 6 There are additional DSM settings that may block SMB access. Refer to the On your Synology NAS section in this article to avoid such configurations.
How to allow traffic on network ports?
In Control Panel > Security > Firewall > Edit Rules, make sure that your firewall rules allow traffic on network ports used by Windows file server (i.e., ports 137, 138, 139, and 445).
How to remove Windows Hello sign in?
If you keep running into errors during setup on a Windows 10 computer, you can remove any registered Windows Hello sign-in options at Start > Settings > Accounts > Sign-in options > Windows Hello Face / Windows Hello Fingerprint / Windows Hello PIN. When you’re done, set up the connection again using Synology Assistant.
Does Windows XP support SMB1?
Windows XP only supports SMB 1. If Synology Assistant is installed on a Windows XP computer or any computer that only allows SMB1 connections, make sure that the Minimum SMB protocol is set to SMB1 on your Synology NAS. Refer to this article for more details.
How to map Synology Drive?
To map the Synology drive, as a Network Drive using the Windows File Explorer: 1.Right-click on the This PC icon in explorer and choose Map Network Drive. 2. At Map Network Drive settings: a. Choose a Drive letter for the mapped sinology folder. b.
How to access Synology NAS?
How to Configure and Access Synology NAS with WebDAV over Internet. Step 1. Set up WebDav on Synology NAS device. Step 2. Assign a Static IP Address on Synology NAS. Step 3. Obtain a Free Domain Name using a DDNS Service. Step 4. Setup Port Forwarding on your Router.
What port is NAS shared file?
To be able to access your NAS shared files from outside of your local network, you need to forward the port "5006" (on your router) to the NAS IP address (e.g. "192.168.1.199"). To do that:
What is a certificate on Synology?
A certificate can be used to secure SSL services on your Synology NAS, such as web (all HTTPS services), mail, or FTP. Having a certificate allows users to validate the identity of a server and the administrator before sending out any confidential information. Synology offers a free and secure SSL/TLS certificate from Let’s Encrypt.
Why does Synology NAS auto block?
The auto block feature helps improve the security of your Synology NAS by blocking the IP addresses of clients with too many failed login attempts. This helps reduce the risk of your accounts being broken into by brute-force attacks.
What is external access?
External access is the ability to remotely access your Synology NAS from any device with an internet connection. DSM allows you to easily set up remote access to your Synology NAS, so you can sign in to DSM or other services by simply entering a custom domain name into your web browser. Moreover, if you need to access certain services directly, you can set up port forwarding rules and open specific ports on your NAS for each service.
What is account protection in Synology?
Account Protection protects your Synology NAS accounts from untrusted clients that have too many failed login attempts. This helps to minimize the risk of brute-force attacks to your accounts.
What is a DDNS?
DDNS (Dynamic Domain Name System) simplifies connection to your Synology NAS over the Internet by mapping a hostname, such as example123.synology.me, to its IP address.
How to identify a specific service on NAS?
This way, you can directly access the service from an external source by using its specific IP address and port number.
Do you need a password for Synology?
Password/Key: If you did not choose Synology for your Service Provider, you will need to enter the password/key for your DDNS provider here.
How to access Synology NAS?
Access Your Synology NAS from Anywhere with WebDrive. WebDrive gives you remote access to shared files on your Synology NAS, allowing you to access your NAS as though it were a local device. With WebDrive, you can easily map a network drive to Synology NAS and connect via WebDAV.
What is a webdrive?
WebDrive lets you assign a drive letter (N, for example) to your NAS, so in one click, you have access to all of your files from the familiar interface of your Mac Finder or Windows Explorer.
What port does Synology use?
You will have to know the IP address of the Synology device. You can your network with a couple options in hopes of finding the Synology NAS. Advance IP Scanner. Once you know the IP, you will still need to know the port to access the Synology. Default port is 5000.
Can you bypass port forwarding on Synology router?
You can bypass port forwarding setup on your router if you proceed with Synology’s Quick Connect. Otherwise, consider what services you need open from the list above. We are steadily building a list of remotely accessible port forwarding setup instructions.
What is WebDAV on Synology?
WebDAV is an extension of HTTP designed to let users edit and manage files stored on remote servers. When WebDAV service is enabled, client programs that support WebDAV, such as certain Windows apps, Mac OS Finder, Linux File Browser, will be able to remotely access the Synology NAS just like accessing a local network drive.
Where is WebDAV in DSM 6.0?
While you have the port forwarded, go to Synology’s admin page and under Package Center search for “WebDAV”. In DSM 6.0 beta, Synology has moved WebDAV Server to its own app that doesn’t come out of the box anymore. If you are on DSM 5.2 or older, WebDAV will be Under Control Panel > File Services > (tab) WebDAV
What is the tool that lets you map WebDAV?
Download and install the tool called NetDrive, it lets you map WebDAV share natively on Windows. When you do make sure to restart your PC.
Does Synology support WebDAV?
Windows do support WebDAV however the type of WebDAV Synology allows you to connect to your personal device does not work if there is no SSL certificate. If you try to mount Synology’s share via the internet, you need to first make sure forward your external port to your local Synology NAS port. This is done usually at your local router’s admin page, each admin panel works differently, but you want to find the mapping where the external request will map to the correct port to your internal NAS server. By default, Synology uses 5005 for HTTP’s WebDAV and 5006 for HTTPS.
Can you enter URL for Synology NAS?
Here you can enter the URL of the Synology NAS as external IP. If you have a certificate installed it also lets you connect via HTTPS with SSL option. If not, enter
What is Synology NAS?
Synology NAS is designed to make storing and sharing files within your local network quick and simple, allowing you to directly access shared folders and files on the Synology NAS without going through the hassle of logging into DSM everytime. For example, you'll be able to store files to your Synology NAS with Windows Explorer just like other network devices.
How to map a network drive?
Open a Windows Explorer window and go to Computer. Click Map network drive. This action makes the Map Network Drive window appear. On the Map Network Drive window, choose a drive letter from the Drive drop-down menu.
