Remote-access Guide

how to remote access a subnet

by Prof. Geo Okuneva DVM Published 2 years ago Updated 2 years ago
image

1) setup a subinterface on the remote machine to some address in the subnet 10.90.90.X 2) after that you should be able to ping the DLINK from that machine 3) then you can use Teamviewer or even setup a Proxy Server using Apache on that remote machine so you can talk to the DLINK.

Full Answer

How do I allow devices to access the entire subnet?

You can allow devices to access the entire 192.168.0.0/24 subnet through router B. On router B execute one of the two depending on what tools you have available ... Using iproute2: ip route add 192.168.0.0/24 via 10.0.0.2 Using route: route add -net 192.168.0.0 netmask 255.255.255.0 gw 10.0.0.2 On a Cisco router you can also use equivalently:

What does restrict VPN access to certain subnets mean?

Restrict VPN access to certain subnets or devices for Remote Dial-in users. A Remote Dial-in (also known as Host to LAN) VPN provides a secure connection for a teleworker/VPN client to remotely access a network, for example, in an office.

How do I set up remote access?

Identify the network adapter topology that you want to use. Remote Access can be set up with any of the following topologies: With two network adapters: The Remote Access server is installed at the edge with one network adapter connected to the Internet and the other to the internal network.

How many network adapters does the remote access server have?

With two network adapters: The Remote Access server is installed behind a NAT device, firewall, or router, with one network adapter connected to a perimeter network and the other to the internal network.

image

How do I access one subnet from another?

How to Connect Computers That Are on 2 Different SubnetsConnect the computers to the network. ... Connect the routers to each other. ... Enable a routing protocol in each subnet's router. ... Allow time for the routing tables to update.More items...

Can I access an IP address remotely?

Once you've set up the target PC to allow access and have the IP address, you can move to the remote computer. On it, open the Start Menu, start typing “Remote Desktop” and select Remote Desktop Connection when it appears in the search results. Then in the box that appears type the IP address and click Connect.

How do I access a network remotely?

How does it work?Open Remote Desktop Connection on your computer.Type in your organisation's public IP address and click connect.Enter your organisation's username and password.

How do I find my subnet mask remotely?

In the Windows search fields, type cmd, to open command prompt.Press Enter.Type ipconfig/all press Enter.Find your network settings.Your PC's IP address and your network Subnet Mask and Gateway will be listed.

How do I setup a remote access to an IP address?

Enable/allow remote connection on Windows 10 PCEnable remote desktop connection through Control Panel.Enable remote desktop connection through Settings app.Check your current local IP address.Configure static IP address.

How do I connect to a specific IP address?

Setting the IP address on your PC or mobile computerClick Start >Settings >Control Panel.On the control panel, double-click Network Connections.Right-click Local Area Connection.Click Properties. ... Select Internet Protocol (TCP/IP), and then click Properties.Select Use the Following IP Address.More items...

What is required for remote access?

Remote computer access requires a reliable internet connection. You'll need to activate or install software on the device you want to access, as well as on the device — or devices — you want to use to get that access.

How do I find the IP address of a subnet?

To calculate the IP Address Subnet you need to perform a bit-wise AND operation (1+1=1, 1+0 or 0+1 =0, 0+0=0) on the host IP address and subnet mask. The result is the subnet address in which the host is situated.

What is my subnet mask IP address?

Go to System Preferences > Network. Select your network and click Advanced. Click on TCP/IP tab and you will find your IP address along with the subnet mask.

What is an IP gateway?

A gateway IP refers to a device on a network which sends local network traffic to other networks. The subnet mask number helps to define the relationship between the host (computers, routers, switches, etc.) and the rest of the network.

How do I find the subnet mask in PowerShell?

If you have PowerShell 5 or greater simply run the command:Install-Module Subnet -Scope CurrentUser.Get-Subnet 192.168.1.1/24.Get-Subnet -IP 192.168.1.1 -MaskBits 20.

What's a subnet mask for Xbox Live?

Type in the subnet mask (usually 255.255. 255.0).

What is my subnet mask ps4?

Select View Connection Status Once there, you'll see the subnet mask right underneath your IP address and above the default gateway.

How do I find my subnet mask Linux?

In order to find the subnet mask for your host, use the “ifconfig” command with the interface name and pipe it with the “grep” command to isolate the “mask” string. In this case, you are presented with subnet masks for every network interface (loopback interface included).

How to Discover and Control Players from a Remote Subnet?

Using the BluOS Controller app, you can remotely access and control individual players from a different subnet at your convenience. This article elaborates on the steps to set up both Network A – local store and Network B – remote VPN (subnet).

Procedure

In the BluOS Controller app (iOS/Android only), select the Rooms button to open the Player Selection Drawer.

What is remote access server?

The Remote Access server acts as an IP-HTTPS listener and uses its server certificate to authenticate to IP-HTTPS clients. The IP-HTTPS name must be resolvable by DirectAccess clients that use public DNS servers.

What is DNS in DirectAccess?

DNS is used to resolve requests from DirectAccess client computers that are not located on the internal network. DirectAccess clients attempt to connect to the DirectAccess network location server to determine whether they are located on the Internet or on the corporate network.

What is a DNS suffix rule?

A DNS suffix rule for root domain or the domain name of the Remote Access server, and the IPv6 addresses that correspond to the intranet DNS servers that are configured on the Remote Access server. For example, if the Remote Access server is a member of the corp.contoso.com domain, a rule is created for the corp.contoso.com DNS suffix.

How to use ISATAP?

To use ISATAP do the following: 1. Register the ISATAP name on a DNS server for each domain on which you want to enable ISATAP-based connectivity, so that the ISATAP name is resolvable by the internal DNS server to the internal IPv4 address of the Remote Access server. 2.

What is direct access client?

DirectAccess clients attempt to reach the network location server to determine if they are on the internal network. Clients on the internal network must be able to resolve the name of the network location server, and they must be prevented from resolving the name when they are located on the Internet. To ensure that this occurs, by default, the FQDN of the network location server is added as an exemption rule to the NRPT. In addition, when you configure Remote Access, the following rules are created automatically:

What is an IP HTTPS server?

IP-HTTPS server: When you configure Remote Access, the Remote Access server is automatically configured to act as the IP-HTTPS web listener. The IP-HTTPS site requires a website certificate, and client computers must be able to contact the certificate revocation list (CRL) site for the certificate.

Do you have to have a public IP address for DirectAccess?

Ensure that you do not have public IP addresses on the internal interface of the DirectAccess server. If you have public IP address on the internal interface, connectivity through ISATAP may fail.

What subnet is router B on?

If router B is not using NAT, you will also have to add a route on router A in order for packets to be able to be routed back to the 192.168.1.0/24 subnet. In order to make this work, we will have to add a few new assumptions:

What is the default gateway for router A?

Devices on router A are using 192.168.0.1 as their default gateway.

What router forwards to 192.168.0.0/24?

Router A allows forwarding to 192.168.0.0/24 from 10.0.0.0/24 (which can be used with or without NAT/IP-masquerading) or can be configured to do so.

What does Netmask do?

Netmask: All it does is inform this device what IP addresses it can reach directly and which ones it has to refer to its routing table to know where to send it.

How does a subnet mask work?

A subnet mask is used to divide an IP address into two parts. One part identifies the host (computer), the other part identifies the network to which it belongs . To better understand how IP addresses and subnet masks work, look at an IP address and see how it's organized.

What is the first 24 bits of a subnet mask?

The first 24 bits (the number of ones in the subnet mask) are identified as the network address . The last 8 bits (the number of remaining zeros in the subnet mask) are identified as the host address. It gives you the following addresses:

What is the first octet of a class A network?

Class A networks use a default subnet mask of 255.0.0.0 and have 0-127 as their first octet. The address 10.52.36.11 is a class A address. Its first octet is 10, which is between 1 and 126, inclusive.

What is the second item required for TCP/IP to work?

The second item, which is required for TCP/IP to work, is the subnet mask. The subnet mask is used by the TCP/IP protocol to determine whether a host is on the local subnet or on a remote network.

How to identify class of IP address?

The most common of them are classes A, B, and C. Classes D and E exist, but aren't used by end users. Each of the address classes has a different default subnet mask. You can identify the class of an IP address by looking at its first octet. Following are the ranges of Class A, B, and C Internet addresses, each with an example address:

How many hosts can you give an IP address to?

You should now be able to give IP addresses to 254 hosts. It works fine if all 150 computers are on a single network. However, your 150 computers are on three separate physical networks. Instead of requesting more address blocks for each network, you divide your network into subnets that enable you to use one block of addresses on multiple physical networks.

How does a TCP/IP network work?

For a TCP/IP wide area network (WAN) to work efficiently as a collection of networks, the routers that pass packets of data between networks don't know the exact location of a host for which a packet of information is destined. Routers only know what network the host is a member of and use information stored in their route table to determine how to get the packet to the destination host's network. After the packet is delivered to the destination's network, the packet is delivered to the appropriate host.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9