Access the following menu option: Select the Reboot Management Interface and click on the Apply button. In our example, the Network Management Interface will restart and enable the SSH service. You can now use a software like PUTTY to remotely access the APC UPS.
Full Answer
How to configure remote access to an APC ups?
To restart the APC UPS network management interface, you need to access the following menu option: • Control > Network > Reset/Reboot. Select the option to Reboot the management interface and click on the Apply button. Congratulations, you have installed and configured the remote access to an APC UPS.
How do I Find my APC ups IP address?
Open the software Network Management Card Device IP Configuration Utility. Enter the full IP address range of your network and click on the button to start the search for the UPS. After a while, the system will automatically locate and report the IP address of your APC UPS.
How do I configure an APC network management card?
An APC Network Management Card must be configured with network settings before it can communicate on the network. Once the cards have been configured with an IP address, Subnet Mask, and Default Gateway the cards can be accessed, managed, and controlled from other computers on the network.
How do I SSH into my APC ups?
After a successful login, you will be sent to the APC UPS Dashboard. Select the SSH check box and click on the Apply button. You will have to reboot the UPS's network management interface. Select the Reboot Management Interface and click on the Apply button. In our example, the Network Management Interface will restart and enable the SSH service.
How do I access APC Smart UPS?
Connect to the UPS/device serial port using the correct APC configuration cable....9600 bps, 8 data bits, no parity, 1 stop bit, and no flow control.Apply the port settings to establish the connection.Press enter 3-5 times to display the username prompt.Use the default username and password of "apc".
How do I find the IP address of an APC?
On the LCD menu, access the About menu. On the About menu, select the SmartSlot Card option. Locate and access the IP address option. In our example, the LCD menu shows the APC UPS IP address 10.10.
How do I log into APC?
APC: First-time login to an APC deviceConfigure your PC using a static IP address on the 192.168. ... Open a web browser and enter the default IP address of the AP device—192.168.2.66:Once the login page is loaded, enter the default administrator login information (login: admin; password: admin01) and click Login:More items...
Can you ssh into a UPS?
Tutorial APC UPS - Enable SSH On the login screen, use the default username and default password. After a successful login, you will be sent to the APC UPS Dashboard. Select the SSH check box and click on the Apply button. You will have to reboot the UPS's network management interface.
What is the default password for APC UPS?
The default username for your APC UPS is apc. The default password is apc. Enter the username & password, hit "Enter" and now you should see the control panel of your router.
Is there an app for APC UPS?
Go to Inventory > Register Smart-UPS. Enter the ID and Product key from the label of the Smart-UPS. Tip: You can use the EcoStruxure IT mobile app to scan the QR code on the UPS label.
Is APC SmartConnect free?
APC™ SmartConnect is a free cloud-enabling feature that allows you to monitor your UPS online – anytime – anywhere through any internet connected device. 1 Additional Year of Battery Warranty for FREE!
What is the default IP for APC Network Management Card?
By default, the APC AP9630 NMC (Network Management Card) does not have an IP address assigned. The easiest way to configure an IP address is to log into the UPS's NMC over a serial port.
What is the default IP for APC Network Management Card?
By default, the APC AP9630 NMC (Network Management Card) does not have an IP address assigned. The easiest way to configure an IP address is to log into the UPS's NMC over a serial port.
How do I connect to APC Smart UPS 1500?
0:591:59Connected Smart UPS with APC SmartConnect - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust install your UPS at your business site and connect it to your network using a dedicatedMoreJust install your UPS at your business site and connect it to your network using a dedicated Ethernet port here scan.
How configure APC PDU IP address?
APC PDU configuration trickUse ARP to define an IP address for the PDU, and use the PDU's MAC address in the ARP. command. ... Use Ping with a size of 113 bytes to assign the. IP address defined by the ARP command. For. ... Use Telnet to access the PDU at its newly. assigned IP address. ... Use apc for both user name and password.
How do I reset my APC Network Management Card?
1.) Hold down the Reset button for 20-25 seconds, ensuring the Status LED is pulsing green during this time. 2.) When the Status LED change to amber or orange, release the Reset button to allow the NMC to complete its reboot process.
What is remote access?
Remote access might also be leveraged to provide support to customers.
What are the two types of remote access?
There are two types of remote access: attended and unattended. Understanding the difference between these remote access methods will determine how you establish remote connections.
How to remote access a PC with Solarwinds?
To remote access a PC with SolarWinds DRS and DRE, you first need to invite a remote host to join an attended or unattended session. With Dameware tools, you can connect with and troubleshoot user machines both inside and outside your network. If the connection is outside the firewall, you will connect with the end user via an unattended or attended Internet Session. To achieve this, you need to configure the Dameware Internet Proxy.
What is remote desktop?
A remote desktop solution allows you to access your PC, its files, and its applications from another device, via internet connection. Remote desktop software achieves this by streaming a visual, real-time feed of the computer you’re trying to access. Some remote desktop tools allow you to establish these remote connections from your smartphone, tablet, or even across a data network.
Why use unattended remote access?
For companies using unattended remote access software to provide support, unattended remote access allows them to deliver intermittent support services and perform maintenance activities on devices. A help desk team is likely to use it to provide immediate support and leverage it to manage infrastructure. This usually involves installing updates and troubleshooting non-critical issues.
What is an attended remote access solution?
Attended remote access solutions require an authorized individual to be physically present with the machine you are trying to remotely connect to, to grant access. It’s typically used to provide remote support, enabling customer support technicians to provide direct and immediate support.
Why is remote access important?
Unattended remote access is ideal for individuals and companies hoping to increase productivity, flexibility, and efficiency by enabling them to access PCs remotely—even when the device is unattended. For instance, it might be used by a company employee to connect to their office desktop, so they have access to all necessary files and accounts even when working from home on another device.
APC UPS - Enable SSH
Would you like to learn how to enable SSH on APC UPS? In this tutorial, we are going to show you how to remotely access an APC UPS using the SSH protocol and the software PUTTY.
APC UPS Playlist
On this page, we offer quick access to a list of videos related to the APC UPS.
What is the software for APC?
Now, you need to access the APC WEBSITE and download the software named: Network Management Device IP Configuration Wizard 5.0.3
What IP address does a SRT 6000 APC use?
In our example, the system located an SRT 6000 APC UPS connected to the network using the IP address 192.168.0.13.
What to do after finishing IP address configuration?
After finishing the IP address configuration, you need to restart the network management interface for the new IP address to be accepted.
Does APC UPS have a DHCP server?
The network where the UPS is connected must have a DHCP Server. First, you need to connect your APC UPS to the Network. The APC UPS will receive an IP address automatically from the DHCP server. The problem is that we don't know the IP address that the APS UPS got from the DHCP server.
The first cloud enabled UPS for distributed IT
APC's next-generation Smart-UPS ™ is more adaptable and easier to deploy than ever before. Out-of-box free remote UPS monitoring is included for all new devices during warranty, enabling you to view the status of your UPS through a secure web portal.
APC keeps your data secure
This service adheres to the latest industry standards in secure data collection, secure data processing and in maintaining security of our infrastructure. For more details, please view our Security Strategy page.
Monitoring made easy
APC’s next-generation Smart-UPS enables you to monitor your power infrastructure online, anytime - anywhere - from our secure web portal. The dedicated SmartConnect Ethernet Port makes set up easy; it requires no additional hardware or software.
