how to remote access edgerouter

Enable L2TP remote access with local authentication I use the local authentication of the EdgeRouter but you can also use RADIUS. set vpn l2tp remote-access authentication mode local If you use local authentication you have also to define the users in the EdgeRouter. Replace <username> and <password> with your credentials.

Full Answer

Is it possible to connect to a remote edgerouter?

It also connects via HTTPS, so if you have that hosted locally, you can try to connect it to the remote edgerouter. I use dynamic DNS with Cloudflare to update my dns name if my IP changes.

How do I configure the edgerouter to work with Windows 10?

1. Connect an Ethernet cable from a computer to the eth0 interface on the EdgeRouter. 2. Configure a static IP address on your computer in the 192.168.1.0/24 range (for example 192.168.1.11). Navigate to the Windows 10 Network connections. Modify the IPv4 settings of the Ethernet adapter.

How to set up VPN on edgerouter server?

Description: VPN to EdgeRouter Server: 123.111.241.26 Account: testuser Password: testsecret Secret: randomsecret Windows 10: Navigate to Control Panel > Network and Internet > Network and Sharing Center > Set up a new connection or network Android: Navigate toSettings > More networks > VPN> Add VPN Name: VPNtoEdgeRouter Type: L2TP/IPSecPSK

How do I configure static IP addresses on the edgerouter?

Connect an Ethernet cable from a computer to the eth0 interface on the EdgeRouter. 2. Configure a static IP address on your computer in the 192.168.1.0/24 range (for example 192.168.1.11). NOTE: There is more information on configuring static IP addresses on your computer in the Beginners Guide to EdgeRouter article.

How do I access my ubiquiti router remotely?

UniFi OS consoles can be accessed remotely at unifi.ui.com. We recommend using our UniFi OS Consoles and Gateways for the most seamless remote access experience because it eliminates issues introduced by third party factors.

How do I access the ubiquiti EdgeRouter?

Accessing the EdgeRouter on Windows Use the Ubiquiti Device Discovery Tool in the section above to automatically open a session to the Web UI. Access the Web UI manually by navigating to https://192.168.1.1 using your favorite browser.

How do I SSH into EdgeRouter?

SSH into a Ubiquiti EdgeMax router using a MacOpen up terminal by clicking on the magnifying glass (top right) and typing terminal terminal.Assuming the default username and password hasn't been changed, enter the command ssh ubnt@192.168.1.1. ... When prompted for the password, enter ubnt.More items...•

Is ubiquiti discontinuing EdgeRouter?

It appears that the original Edgerouter Lite is indeed discontinued, finally, but everything else (including the -X, amazing for sixty bucks) is still there.

What is Ubiquiti EdgeRouter used for?

EdgeRouters that include a hardware switch-chip are able to place multiple physical ports in the same LAN, similar to how a network switch functions. This allows devices on the same network to communicate with each other through the EdgeRouter without sacrificing any performance.

How does hairpin NAT work?

Hairpinning, in a networking context, is the method where a packet travels to an interface, goes out towards the internet but instead of continuing on, makes a “hairpin turn”—just think of the everyday instrument used to hold a person's hair in place—and comes back in on the same interface.

How do you bridge interfaces in EdgeRouter?

Creating a Bridged InterfaceEnter configuration mode. ... Delete the existing configuration from the interfaces that are to be added to the bridge group. ... Commit the changes. ... Create a bridge interface (br0) and assign it an IP address. ... Add the physical interfaces to the bridge group.More items...

What is the default IP for Ubiquiti?

192.168.1.20Find the IP Address of Your Access Point If you didn't know, Ubiquiti Access Points have a default IP address of 192.168. 1.20. Connecting more than one of these devices to your network at once will create an IP conflict like we discussed above.

How do I set a static IP on EdgeRouter?

Configure Static IP Addresses using the Command LineEnter configuration mode. configure.Delete the existing IP address configuration from the WAN interface. ... Assign the IP address(es) to the WAN interface. ... Add the default gateway address. ... Add the DNS servers. ... Commit the changes and save the configuration.

Does EdgeRouter 4 have firewall?

The EdgeRouter uses a stateful firewall, which means the router firewall rules can match on different connection states.

What is EdgeOS?

EdgeOS is a powerful, sophisticated operating system that manages your EdgeRouter. It offers both a browser‑based interface (EdgeOS Configuration Interface) for easy configuration and a Command Line Interface (CLI) for advanced configuration. To access the EdgeOS Configuration Interface: 1.

Did ubiquiti discontinue the USG?

Have the USG devices been discontinued? They're out of stock on the US Ubiquiti store and they've been removed entirely from the Canadian Ubiquiti store. Most retailers who used to carry them are all out of stock with no indication if they'll ever get more.

What is the default IP for Ubiquiti?

192.168.1.20Find the IP Address of Your Access Point If you didn't know, Ubiquiti Access Points have a default IP address of 192.168. 1.20. Connecting more than one of these devices to your network at once will create an IP conflict like we discussed above.

What is the default username and password of ubnt?

The default username for your Ubiquiti router is ubnt. The default password is ubnt. Enter the username & password, hit "Enter" and now you should see the control panel of your router.

How do I connect to EdgeRouter Lite?

1. Connect an Ethernet cable from the Ethernet port of your computer to the port labeled eth0 on the EdgeRouter Lite. 2. Configure the Ethernet adapter on your host system with a static IP address on the 192.168.

How do I set up EdgeRouter pro?

4:0012:03EdgeRouter Pro Unboxing and Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the first thing I want to do is run through the wizard. Get myself some internet access and thenMoreSo the first thing I want to do is run through the wizard. Get myself some internet access and then update the firmware of this device to a newer version the latest stable version is 18.5.

Secure Home Network: Add Remote-Access VPN to EdgeRouter

In the era of work-from-home, it is rare of a need to access your home network. In the rarest occasion when we need something from your digital home, from accessing files in your NAS to viewing security camera footage, while being away, it is very inconvenient and less secure to get access from a public internet hotspot.

Protocol Comparisons

PPTP stands for point-to-point tunneling protocol, and it has been in common operating systems for a long time (since Windows 95 for example). PPTP has known vulnerabilities.

Server Configuration in EdgeOS

This Ubiquiti Support Page details the steps; however, I want to document a few things:

Client Configuration

Client requires the certificates and server information, in the form of address/domain name and port (1194). With DDNS, we can specify a constant domain name without worrying about changing dynamic IPs assigned by the ISP.

How to change the Ethernet port on EdgeRouter?

1. Connect an Ethernet cable from a computer to the eth0 interface on the EdgeRouter. 2. Configure a static IP address on your computer in the 192.168.1.0/24 range (for example 192.168.1.11). Windows Client. Navigate to the Windows 10 Network connections. Settings > Network & Internet > Status > Change Adapter Options.

What version of EdgeOS is setup wizard?

Setup wizards were added to the Web UI starting from the EdgeOS v1.4.0 firmware.

What is the basic setup wizard?

The Basic Setup wizard which will accomplish all the necessary tasks to allow your router to connect to the Internet, including enabling the default firewall, setting up a Local Area Network and adding a DHCP Server. Each item is explained in more detail below.

Can you use MSCHAPv2 on VPN?

Following these steps the VPN tunnel should be established without issues. If your Windows 10 users are having connection fails, make sure you enable MSCHAPv2 on the VPN adapter as this is required for L2TP tunnels with Ubiquiti EdgeRouter to work as shown below:

Can you use VPN with Ubiquiti Edge?

In this tutorial we will explain how to configure an L2TP VPN with local authentication on a Ubiquiti Edge Router. The Edge Router device has a GUI, but the VPN wizard is missing features and it is not compatible with ConfigTree or the CLI. That means that if you create your config with the VPN wizard, then you won’t be able to modify it through the CLI or the GUI. For this reason, we strongly recommend to use the CLI for the setup.

What port does EdgeOS listen to?

One of the things I noticed in EdgeOS is that it listens to port 80 and 443. However, users that try to hit the router via HTTP will be redirected to HTTPS. The show service gui command won’t list it but when you issue show configuration commands | match “service gui” then it will show up. This behavior is OK in my opinion since it switches to secure HTTP. Though, there might be some people who will find this unacceptable. If you are one of them, the delete service gui http-port 80 command will disable this. Alternatively, one can just use the firewall to block it. I will cover the firewall configuration in future blog posts.

Does the second method work if password authentication is not enabled?

This method is the easiest out of the two. This method will only work if password authentication is still enabled. If not, then you will have to use the second method.

Can clients connect to Edgerouter?

Clients that do not have public keys saved in the EdgeRouter will no longer be able to connect.

Table of Contents

Establishing Initial Connectivity

Accessing The EdgeRouter Using The Discovery Tool

Accessing The EdgeRouter on Macos